Homeowners level ground in their yards for a variety of reasons. Some people level the ground before building a new home, especially when the property has hills. Others level ground to prepare for new above-ground swimming pools, swing sets, driveways, sheds or patios. Some people even level the ground before planting grass seed, flowers and vegetable gardens. Whatever your reason to level ground, the process is the same.
Steps
-
Stake off your area to level. This area does not need to be perfectly square or rectangular unless you are planning on using sod instead of simply replanting your grass. Drive wooden or plastic stakes around the area to be leveled.
-
Use a string level. Attach strings to stretch between the stakes, a few inches above the ground. Attach a string level to the strings to determine the high point. This will usually be your starting point and the rest of the ground will be brought to here, but you can also lower some ground if that makes more sense for your project.Advertisement
-
Adjust the strings. Using a tape measure and your level, adjust the strings until you can see how much height needs to be added or taken away across the area you are adjusting.
-
Adjust for grade. Keep in mind that you may want to adjust the grade of your land to help combat drainage problems. Your land should be graded 1" for every 4', leading away from your home.
-
Remove the grass if necessary. If you are leveling a small area and it is mostly level, you probably will not need to remove the grass. However, if you have a large area and a lot of leveling to do, removing the grass will be much easier. A simple shovel is all that's necessary for a reasonable amount of space.
-
Add your ground cover. Depending on how much ground you have to cover and what will be going on the ground afterwards, you'll need to level your land with differing mixtures of soil, sand, and compost/manure fertilizer. If you want to grow grass in this area, the cover will need to be nutrient rich. If you want to level for a pool or shed, soil and sand will do just fine.
-
Spread the topsoil. Use a garden rake to spread the material evenly, checking using your level and a measuring tape to make sure it's staying level. If you have a large area to cover, there are small versions of ground moving equipment that you can rent from your local hardware store. They will be able to advise you on what will work best for your property.
-
Tamp the soil. If you are leveling a small area, you can tamp the soil using your foot and the bottom of your rake. If you are leveling a large area, or it is especially important to keep the ground level (such as if you are building a structure), get a tamper or plate compactor to compact the soil. [1] X Research source
-
Let it settle. Give the soil plenty of time to settle. It needs at least 48 hours, if not several days or weeks to settle properly. Mist the area with water if your area does not get rainfall during that time.
-
Spread your seeds. If you are intending to reintroduce grass to that area, you will need to buy grass seed that is appropriate for your needs and the area in which you live. [2] X Research source Get your seed, as well as a hand spreader or other tool to spread the seed evenly.
-
Lightly cover with more soil. Lightly cover the seeds with a sprinkling of topsoil and lightly tamp it down. [3] X Research source
-
Water lightly. Mist the area with water 4 times a day for at least 2 days to encourage the seeds to germinate. [4] X Research source
-
Reseed as necessary. Give the grass time to grow in and then reseed areas where the grass does not grow in to your satisfaction.
-
Alternatively, buy sod . You can also buy sod if you are impatient or want a particularly uniform appearance.
Expert Q&A
-
QuestionHow should I level the ground before building a shed?Benjamin Hansen is a Landscape Contractor and the Owner of Artscape Gardens, a boutique landscaping company in Los Angeles, California. With over 12 years of experience, Benjamin specializes in transforming properties into aesthetic, functional, and drought-tolerant oases. Benjamin uses color scheme, dimension, and water conscious spaces to inspire the design and installation of soft scape, hardscape, patios, pathways, irrigation, drainage, fencing, concrete, lighting, and electrical work. Artscape Gardens covers all areas of the C-27 landscape contractor classification.We tend to always go with the rule of thumb that for any slab on grade, meaning any concrete that we pour for a shed to be built around, we want to make sure that there's drainage without any problems. Even though the shed is covered, we would still recommend doing a quarter-inch of a drop per foot when we grade for a shed. Now there are different variances of that—you could do even less. But a good rule of thumb would be a quarter-inch per linear foot of a drop so water will be able to move away.
-
QuestionCan I use a string level for a distance of 40 feet?Community AnswerYes, 40 or 400 feet. You want to stake off intervals of 10 feet to keep leveling consistent. Be mindful of the 1" per 4' rule away from the house for drainage purposes.
-
QuestionCan you explain the 1" per 4' rule more clearly?Community AnswerIf you start with your back to your home's outside wall, when you walk 4 feet into your yard, you should end on ground that is 1 inch lower than the ground at your outside wall. It's to make sure water is encouraged to flow away from your house and foundations, preventing flooding or water damage to your foundation/building.
Tips
- If you have trouble finding low areas, you can flood the property and see where puddles form.Thanks
Warnings
- Be careful around all tools and equipment to avoid injury.Thanks
Video
Things You'll Need
- Tape measure
- Fluorescent orange spray paint
- Hammer or sledgehammer
- 4 stakes
- String
- Sod cutter and shovel
- Soil
- Bow rake
- Lawn roller
- 2 posts
- String level
References
About This Article
To level ground, start by using strings attached to stakes set at the height where you would like the ground to sit to see how much dirt you will need to put down. Then, remove any existing grass from the area, and use a shovel to add an even layer of ground cover. Spread the material with a rake and use a level and measuring tape to check the grade of the land. Carefully tamp the soil down to make it flat, and let it settle for 2 days. For more tips, including how to regrow grass, scroll down!
Reader Success Stories
- "I am landscaping my niece's garden and have gone from 5 to a seven just reading your article."