Download Article
Download Article
A leveled refrigerator looks great in your home, but it also helps your refrigerator function properly. If your refrigerator isn't currently level, the good news is it's easy to do yourself. You'll just need to access the legs behind the grille on your fridge so you can adjust them. Don't worry—we've got you covered! This article will walk you through how to level your refrigerator step by step.
Steps
Get Product Support Solve Any Problem
Try Asking:
We’re sorry we don’t have the product, brand, or model you are looking for. Please enter its name below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Remove the grille over the legs. At the very bottom of the refrigerator, you may see a covering over the legs. Many times, this grille can be removed by pulling with your hands. Some grilles will be attached by clips or screws you’ll have to undo first. [1] X Research source
- Consult your owner’s manual for advice when you’re unsure of how to remove the grille.
-
Examine the legs. Check the legs first for screws or bolts that you’ll need to adjust. While some legs can be rotated freely, some require a wrench or a screwdriver. Refrigerators made by GE, for example, require a flat blade screwdriver.Advertisement
-
Rotate the legs. Look along the top and bottoms of the legs. You’ll either see a slot near the top or a screw or bolt near the bottom. Use a flat-head screwdriver on the slots and an adjustable wrench or pliers on the bolt. Turn clockwise to raise the refrigerator. Turn counterclockwise to lower the refrigerator. Try to get the refrigerator level from left to right. [2] X Research source
- Legs without fasteners, such as those on Whirlpool refrigerators, can be turned to the right to lower the refrigerator and to the left to raise it.
- If you cannot reach the legs to adjust them, you’ll need someone to lean the refrigerator to the back. Be very careful and don’t tilt it back too far.
-
Measure the refrigerator’s tilt with a level. Place the level on the top of the refrigerator behind the door. The level will be flat if the refrigerator is even from left to right. Adjust the legs to get the refrigerator even from left to right. [3] X Research source
-
Measure the refrigerator’s slope. Place the level against the bottom of the refrigerator. It should slope slightly to the back. Make sure the front is .25 inches (6.35 mm) higher than the back. Make adjustments to the front legs as necessary.
-
Replace the grille. Push the grille back onto the bottom of the refrigerator. Replace any clips or screws.
Advertisement
-
Remove the grille over the legs. Find the grille at the bottom of the refrigerator. Look for screws that need to be undone. Unscrew it or pull the grille off with your hands. [4] X Research source
- Consult your owner’s manual for advice when you’re unsure on how to remove the grille.
-
Adjust the screws. Each roller will have a screw on it. You will need pliers or a wrench for a ⅜ inch (9.5 mm) screw. Turn the screw clockwise to raise the legs. Turn the screw counterclockwise to lower them. [5] X Research source
-
Measure the refrigerator’s tilt with a level. Place the level on the very top of the refrigerator behind the door. When the rollers are adjusted properly, the level will be flat from left to right. Adjust the legs so the refrigerator rests evenly. [6] X Research source
-
Measure the refrigerator’s slope. Next, place the level against the bottom of the refrigerator. The refrigerator should slope to the back. Adjust the rollers so the front end is .25 inches (6.35 mm) higher than the back end. Adjust the rollers as necessary. [7] X Research source
-
Replace the grille. Push the grille back onto the bottom of the refrigerator. Replace any clips or screws.
Advertisement
Expert Q&A
Search
-
QuestionHow do I level a fridge on an uneven floor?Aaron Beth is the founder of Aaron’s Refrigeration Company in New York City and a factory certified installer (FCI) for Sub-Zero products. He specializes in the service and maintenance of built-in refrigerators, wine coolers and ice machines. With over 54 years of experience, Aaron is the recipient of numerous Super-Service awards from Angie’s Lists and 2019 Best-of-the City.I would recommend putting thin pieces of plywood under your fridge until it's level.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you have an uneven floor, put a piece of plywood underneath the refrigerator to level it out. [8] X Expert Source Aaron Beth
Appliance Technician Expert Interview. 14 July 2020.Thanks - Keep the front end of the refrigerator higher than the back. This helps the coolant drain, causing the refrigerator to work efficiently.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Tilting a refrigerator is dangerous. It should never be done alone. Have someone else tilt it very gently to the back so you can reach the legs.Thanks
Advertisement
References
- ↑ https://www.cnet.com/home/smart-home/how-to-level-your-refrigerator/
- ↑ https://products.geappliances.com/appliance/gea-support-search-content?contentId=19144
- ↑ https://www.samsung.com/us/support/answer/ANS00062321/
- ↑ https://www.cnet.com/home/smart-home/how-to-level-your-refrigerator/
- ↑ https://products.geappliances.com/appliance/gea-support-search-content?contentId=19144
- ↑ https://www.samsung.com/us/support/answer/ANS00062321/
- ↑ https://www.lg.com/ca_en/support/product-support/troubleshoot/help-library/cs-CT20098040-20153059144969/
- ↑ Aaron Beth. Appliance Technician. Expert Interview. 14 July 2020.
About This Article
Article Summary
X
Levelling your refrigerator will help improve its efficiency and only takes a few minutes if you have the right tools. All you’ll need is a bubble level and a screwdriver or wrench. Start by removing the grille at the bottom of your fridge to expose its legs or rollers. Depending on your fridge, you’ll need to adjust these with a screwdriver or wrench. Generally, you’ll need to turn the legs or rollers clockwise to raise them. You want your front legs to be ¼-inch higher than the back to help the coolant drain. Place your bubble level on top of the fridge behind the door to measure the angle. For more tips, including how to safely tilt a refrigerator, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 174,400 times.
Reader Success Stories
- "How to check for and correct slope of fridge from front to back."
Advertisement
"How to check for and correct slope of fridge from front to back."
"The article gave me info I needed."
