Download Article
Keep your fridge sealed tight with this basic gasket replacement
Download Article
Have you noticed your fridge running more frequently or not feeling as cold as normal? One of the most common culprits is a damaged rubber seal (gasket) around the outside of your fridge door. A door seal replacement is one of the easiest repairs for a fridge, and you can do it on your own. Keep reading, and we’ll help walk you through everything you need to know for removing the old gasket and installing a brand new one.
Things You Should Know
- Lift the edge of the fridge door seal and unscrew the screws on the metal retainer.
- Pull the seal up and away from the fridge door to remove it.
- Buy a new seal from your fridge’s manufacturer that matches your model number. Press the new gasket into the door’s groove and screw it back down.
Steps
Get Product Support Solve Any Problem
Try Asking:
We’re sorry we don’t have the product, brand, or model you are looking for. Please enter its name below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Inspect your fridge’s door seal for damage or tears. Open your fridge and look at the rubber seal around the perimeter of the door. If you notice there are any large cracks or holes in the rubber, it’s time for a replacement. [1] X Research source
- If you notice any mold on the gasket, it’s a good sign there’s damage that might not be visible.
- Fridge gaskets keep cold air in and heat out of the refrigerator. If your seal has cracks or damage, temperatures in the refrigerator could increase and cause food inside to spoil more quickly. It will also cost you more money in energy.
-
Slide a dollar bill between the gasket and fridge to check for a loose seal. Put the dollar bill between the refrigerator door and refrigerator, and close the door on it. Then, try to pull the bill straight out from the seal. If you feel the dollar drag slightly, your gasket is still in good condition. If the bill slips out quickly or has moisture on it, then it’s time for a door seal replacement. [2] X Research source
- Alternatively, check for additional ice or moisture buildup inside your fridge and freezer. Moisture forms when warm air from outside leaks into your fridge through the seal and condenses into water droplets. Fixing the seal will help prevent ice build-up .
- If you don't see any problems but your fridge still isn't working properly, check other fridge components like the condenser to see if they're working properly.
Advertisement -
Try fixing minor cracks in an old gasket with silicone sealant . Apply a bead of silicone sealant along the edge of the crack. Slowly close the refrigerator door and leave it shut overnight. Check the door seal again in the morning to see if the sealant filled in the crack. [3] X Research source
- Silicone sealant only works for fixing minor cracks, and it’s not a permanent solution. More cracks and gaps will eventually form in the door seal, so you’ll need to replace it then.
Advertisement
-
Buy a door seal that matches your fridge. Check your refrigerator’s manual or look for a sticker inside of your fridge to find the exact model number. Look for a new gasket at a hardware store or on the manufacturer’s website and ensure the one you get matches the size of your door. [4] X Expert Source Aaron Beth
Appliance Technician Expert Interview. 14 July 2020.- Fridge door seals usually range from $30–50 USD
- If you can’t find your owner’s manual, search your fridge’s make and model online to find the correct gasket.
-
Tape the gasket down for 1–2 days if it has twists. Lay the gasket flat on the floor or a table. If any areas look twisted or raised, tape them down so they lie flat. Leave the gasket in place for at least 1 day so it has time to flatten out into the proper shape. [5] X Research source
- Alternatively, set lightweight objects on the gasket to hold it in place. Just make sure the objects aren’t so heavy that they squish the gasket down.
-
Soak warped areas of the gasket in warm water. Heat up a bowl of water in your microwave so it’s warm but not boiling hot. Slowly dip the warped section of the door seal in the water and leave it submerged for a couple of minutes. Then, rub the gasket with your fingers to help straighten out the rubber. Dry the gasket off completely before you install it. [6] X Research source
- Warming the gasket makes it more malleable so it’s easier to reshape.
Advertisement
-
Lift the edge of the door seal to check for a metal retainer. Unplug your fridge to save energy while you work, then open your fridge door and grab the bottom inside edge of the gasket. Pull the gasket back to see if there’s a metal retainer, which is a flat piece screwed into the fridge door. If there’s a retainer with screws, then have a hex-head screwdriver ready. [7] X Research source
- If there isn’t a metal retainer, then the gasket will come off of your fridge door easily.
-
Loosen the screws on the metal retainer without removing them. Lift the edges of the seal to find the screws underneath. Turn the screws counter-clockwise to loosen them slightly. Just make sure not to completely take the screws out so you don’t lose them. Work your way around the entire door removing the screws. [8] X Research source
- The screws secure the gasket between a plastic door liner and the actual fridge door.
-
Pull the gasket out of the door. Once all of the screws are loose, hold the door’s seal by one of the corners. Pull the corner up and away from the fridge door so it easily slides out from behind the plastic liner. Just be careful not to be too forceful since some plastic liners are quite brittle and could break if you’re too rough. [9] X Research source
- If the seal is stuck or glued onto your fridge door, slide a putty knife underneath to help loosen it.
- Toss the old gasket in the trash or contact your local waste collection service to see if you can recycle it.
-
Push the new gasket into the groove on your fridge door. Position one of the gasket’s corners on the top of the refrigerator door. If your fridge door has a metal retainer, push the lip of the new gasket behind the retainer. Otherwise, use your thumb to push the gasket into the recessed groove around the perimeter of the refrigerator door. [10] X Research source
- It’s okay if the gasket doesn’t sit perfectly flush right away since you’ll be able to make slight adjustments to fix any warps.
-
Push a stubborn seal behind the liner with a screwdriver. If the lip doesn’t slide into the groove around your fridge door, push it in a flathead screwdriver. Slide the end of the screwdriver between the door and the liner. Hold the gasket down with your other hand before taking out the screwdriver so the seal doesn’t come out with it. [11] X Research source
- After you put the screwdriver in behind the liner, pry it forward slightly to help the gasket slip in.
-
Screw the metal retainer back in if your fridge has one. Turn the screws clockwise to tighten them until they feel snug. Go around the perimeter of your refrigerator door to secure all of the screws. [12] X Research source
- Avoid forcing or over-tightening the screws so you don’t damage the liner.
-
Apply baby or talcum powder around the door seal. Shake a little bit of the powder into your hand and rub it around the sides and corners of the new gasket. The powder helps reduce friction and prevents the door seal from twisting when you open and close the door.
-
Rub petroleum jelly on the seal along the hinged side of the door. Take a fingertip-sized amount and spread it over the gasket’s surface on the side with the hinges. Spread the petroleum jelly in a thin, even layer. [13] X Research source
- Petroleum jelly helps the door seal slide against your fridge when you open and close the door so it doesn’t twist or warp.
-
Open and close your fridge door to check for gaps in the seal. Slowly close your fridge and inspect the gasket for any warped areas. Run your finger around the edge of your fridge door to make sure the seal sits flush against your fridge. Then, open the door to ensure the seal doesn’t drag or twist against the fridge. [14] X Research source
- If you notice warps in the gasket, try heating the rubber with a hair dryer on low heat to make it fit against your fridge better.
Advertisement
Expert Q&A
Search
-
QuestionCan you fix the seal on a refrigerator?Aaron Beth is the founder of Aaron’s Refrigeration Company in New York City and a factory certified installer (FCI) for Sub-Zero products. He specializes in the service and maintenance of built-in refrigerators, wine coolers and ice machines. With over 54 years of experience, Aaron is the recipient of numerous Super-Service awards from Angie’s Lists and 2019 Best-of-the City.Most seals are made out of vinyl, so when they split or tear, it's difficult to repair. It's best to just replace the seal if you can.
-
QuestionMy replacement gasket has a twist in it. How do I get it out?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerLay the gasket flat and tape down any twisted spots. Leave the gasket for 1–2 days until it lies flat. If you already installed the gasket, try heating it with a hair dryer and reshaping it.
-
QuestionHow can I order for refrigerator gasket on line and what is the cost of it?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerGet a gasket that matches the model of your fridge. A new one costs anywhere from $30–50 USD.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Hex-head screwdriver
- Replacement seal
- Baby or talcum powder
- Petroleum jelly
References
- ↑ https://s3.amazonaws.com/dfs-allpoints-images/static-pages/guides-catalog/AllPoints-Refrigeration-Gaskets-Guide.pdf
- ↑ https://youtu.be/lWHydQZbjQQ?t=31
- ↑ https://youtu.be/Tx4_xvlYim0?t=28
- ↑ Aaron Beth. Appliance Technician. Expert Interview. 14 July 2020.
- ↑ https://youtu.be/hQAgho-KjGc?t=57
- ↑ https://youtu.be/hQAgho-KjGc?t=106
- ↑ https://youtu.be/S3zPwScpR9w?t=6
- ↑ https://s3.amazonaws.com/dfs-allpoints-images/static-pages/guides-catalog/AllPoints-Refrigeration-Gaskets-Guide.pdf
- ↑ https://youtu.be/lWHydQZbjQQ?t=69
About This Article
Article Summary
X
To replace the seal on your refrigerator door, start by submerging the new gasket in warm water so that it’s softer and more pliable. Then, remove the old gasket by lifting the edge up and turning the screws underneath. Once you’ve loosened the screws, pull off the old gasket and dispose of it. Next, take the new gasket out of the water and put it on the refrigerator door, pushing the lip over the metal retainer that holds the screws. Finally, tighten the screws in the retainer to secure the gasket. Read on to learn how to fix any gaps in the seal with petroleum jelly!
Did this summary help you?
Thanks to all authors for creating a page that has been read 970,538 times.
Reader Success Stories
- "Visited two other sites prior to yours via Google. One was nothing more than someone rambling on and on, often with one non-sequitur followed by another. wikiHow was focused right on the problem at hand, straightforward, simple language used in the explanations. My time is my only irreplaceable asset; I have none for advice that is designed to sell me a new refrigerator rather than fixing the seal. I'll be back for more of your 'how!'" ..." more
Advertisement
91%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Visited two other sites prior to yours via Google. One was nothing more than someone rambling on and on, often with one non-sequitur followed by another. wikiHow was focused right on the problem at hand, straightforward, simple language used in the explanations. My time is my only irreplaceable asset; I have none for advice that is designed to sell me a new refrigerator rather than fixing the seal. I'll be back for more of your 'how!'"
..."
more
"I am glad to know that all those scrapes from magnets can be covered up with some metal paint. I will be using the brush and hoping for good results. Thanks for the info."
..."
more
"Hi there, I'll make it short and sweet. I class myself as a DIY person, and this step by step was easy peasy, awesome. I appreciate, thanks."
..."
more
"Was very helpful in replacing the seal on my daughter's refrigerator. I followed step by step. Was very easy also. Thanks for the video."
..."
more
"Thinking that my fridge's door gasket leaks, I needed some ideas of where to start. Your clear explanations and pictures are a big help!"
..."
more
