Download Article
Download Article
Clear slime is fun and easy to make at home with a few simple ingredients. You can whip up your own batch of clear slime in just a few minutes and play with it immediately! If you want your slime to be absolutely clear, just like glass, you'll need to store it in an airtight container for a few days before you start playing with it.
Ingredients
Clear Slime with Glue and Borax
- 1 ⁄ 2 cup (120 ml) of clear PVA glue
- 1 ⁄ 2 cup (120 ml) of warm water
- 1 ⁄ 2 cup (120 ml) of room-temperature water
- 1/4 teaspoon (1 gram) of Borax powder
Clear Slime with Glue, Baking Soda, and Saline Solution
- 1 cup (240 ml) of clear PVA glue
- 1 cup (240 ml) of water
- 2 tablespoons (30 ml) of contact lens saline solution
- 1 tablespoon (14 grams) of baking soda
Steps
-
Combine the clear glue and room-temperature water in a large bowl. Measure out 1 ⁄ 2 cup (120 ml) of clear PVA glue and dump it in a bowl. Then, measure out 1 ⁄ 2 cup (120 ml) of room-temperature water from the tap. Add the water to the glue and stir them together. [1] X Research source
- You can use a spoon, spatula, or craft stick for stirring.
- If you want to double the recipe, use 1 cup (240 ml) of clear PVA glue and 1 cup (240 ml) of room temperature water.
-
Mix the Borax powder and warm water together in a separate bowl. Measure out 1/4 teaspoon (1 gram) of Borax powder and put it in another bowl. Then, measure out 1 cup (240 ml) of warm water and add it to the bowl with the Borax. Stir the ingredients until the Borax powder dissolves. [2] X Research source- The Borax mixture will look a bit cloudy, but don't worry! The slime will be clear.
- If you're creating a double batch, use 1/2 teaspoon (2 grams) of Borax powder.
Safety Tip: Wear plastic gloves when working with undiluted Borax, since it can cause burns. Borax should never be inhaled or come into contact with your eyes, nose, or mouth.
Advertisement -
Combine the glue mixture and the Borax solution. Pour the Borax solution into the large bowl with the glue mixture. The mixture will start taking on a slime-like texture right away. Stir the ingredients with a spoon to mix them together. [3] X Research source
-
Keep stirring the mixture until all of the liquid is absorbed. You'll know the slime is ready when there's no more liquid left in the bowl. It can take a few minutes for the liquid to absorb completely, so be sure to keep stirring! [4] X Research source
-
Knead the slime until it reaches your preferred consistency. Use your hands to squish and push down on the slime mixture repeatedly. Keep kneading the slime for several minutes until the consistency is exactly how you want it. [5] X Research source
- The longer you knead the slime, the more rubbery it will become.
- You can leave the slime in the bowl while you knead it.
- The slime will have a few air bubbles in it at this point, which is totally normal!
-
Play with your slime or store it in an airtight container until it gets clear. At this point, your slime is ready to play with! If you want the air bubbles to go away so that the slime is crystal clear and looks like glass, don't play with it yet. Transfer it to a plastic zipper baggie or container with an airtight lid and let it sit for 1-2 days. [6] X Research source
- The longer you leave the slime in the container, the clearer it will become.
- Be sure to wash your hands before and after playing with the slime to keep it looking clear.
- The slime will last several weeks if you store it in an airtight container. Toss it out and make a new batch when it gets cloudy or dirty!
Advertisement
-
Put the clear glue into a large bowl. Measure out 1 cup (240 ml) of clear PVA glue and pour it into a large bowl. You can set this bowl aside for now. [7] X Research source
- Make sure you're using clear PVA glue for this, not white school glue!
-
Combine the water and baking soda in a separate bowl. Measure out 1 cup (240 ml) of water and pour it into a bowl. Add 1 tablespoon (14 grams) of baking soda to the bowl. Stir the ingredients until the baking soda dissolves completely. [8] X Research source
-
Pour the baking soda solution into the bowl with the glue. Add the baking soda solution to the glue slowly so that the ingredients are easy to mix together. Stir continuously as you pour in the baking soda solution. Keep stirring until the ingredients are completely mixed together. [9] X Research source
-
Stir 2 tablespoons (30 ml) of saline solution into the mixture. Measure out the contact lens saline solution and dump it into the large bowl. Keep stirring until the saline solution is fully mixed into the other ingredients. [10] X Research source
- The saline in contact lens solution is what "activates" the slime and creates the gooey texture!
- The mixture will be thick and gel-like at this point.
-
Knead the slime with your hands until the liquid is absorbed. You can leave the slime in the bowl for this part! Just use your fingers to squish the slime mixture around for several minutes. [11] X Research source
- The longer you knead the slime, the thicker it will get.
Tip: For a cool effect, you can knead about 1 tablespoon (14 grams) of your favorite glitter into the slime. You can add more or less glitter than that to get different looks—it's totally up to you!
-
Play with the slime or store it in an airtight container. Your slime is ready to be played with, but it probably won't look crystal clear. If you want the slime to be absolutely clear, like glass, transfer it to an airtight container and let it sit for 3-5 days before playing with it.
- The longer you leave the slime in the container before playing with it, the clearer it will look.
- As long as you store your slime properly in a plastic baggie or airtight container after playing with it, it should last for several weeks!
- Throw away the slime once it starts looking dirty or cloudy.
Advertisement
Community Q&A
Search
-
QuestionCan I microwave the clear slime to make it instant clear slime?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerNo, you don't need to use heat at all for this project. Heating your slime might change the consistency or look.
-
QuestionMy clear slime looks white from all the bubbles. How do I make it 100% clear?Community AnswerTo make it 100% clear, you have to let the slime sit for 5-7 days. While it sits, you cannot touch it.
-
QuestionHow much baking soda do I need?Community AnswerStart with one teaspoon, then add more if necessary.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Wash your hands before making clear slime so that it will look more clear.Thanks
- Try adding small toys, glitter, or beads to your slime for a creative look.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- When adding lotion to your slime, be careful not to add too much because it can cause the slime to be too melty. If you have this problem, just add more activator.
- My clear slime method is to add hand sanitizer mixed with tap water, clear glue, and activator. It worked well, but just make sure you don't add too much water!
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful working with Borax. Wear gloves or have an adult help you.Thanks
- Store it in an airtight container to keep it from getting messy and all over the place.Thanks
Advertisement
Things You'll Need
- Large bowl
- Medium bowl
- Spoon
- Airtight container or plastic baggie
References
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://littlebinsforlittlehands.com/elmers-clear-glue-slime-recipe-kids/
- ↑ https://asubtlerevelry.com/clear-slime-recipe/
- ↑ https://asubtlerevelry.com/clear-slime-recipe/
- ↑ https://asubtlerevelry.com/clear-slime-recipe/
About This Article
Article Summary
X
To make clear slime, start by mixing 1/2 teaspoon (4 grams) of borax with 1 cup (240 milliliters) of hot water. Then, in a separate bowl, add 1/2 a cup (120 milliliters) of clear glue. Next, stir 2 tablespoons (30 milliliters) of room temperature water into the glue. Now, add 3 teaspoons (15 milliliters) of the borax solution to the glue mixture, and stir everything thoroughly. Finally, knead the slime together with your hands. If you want to make the slime less sticky, you can add a bit more borax solution. Alternatively, if you want to make the slime softer, try adding a little more glue!
Did this summary help you?
Thanks to all authors for creating a page that has been read 265,256 times.
Reader Success Stories
- "The thing that helped me was the pictures and the comments, because it's nice to see how other people make slime as well. I would recommend this to my friend who loves slime and has always wanted to make some without borax, but didn't know how.Thank you." ..." more
Advertisement
"The thing that helped me was the pictures and the comments, because it's nice to see how other people make slime as well. I would recommend this to my friend who loves slime and has always wanted to make some without borax, but didn't know how.Thank you."
..."
more
"This was so awesome to make. I used exact measurements, and the first picture you see is mine. It took me 3 of those small containers."
..."
more
"It was helpful by teaching me how to make slime. I've never made slime before so it was helpful to have instructions. "
..."
more
"All my friends were making slime, and I wanted to make some of my own. Thank you!"
"Awesome. It helped me. I made slime for the first time. Thank you so much!"
