Download Article
Download Article
You don't need to buy expensive, commercial nail glue because making your own is quick and easy! All you need are a few basic supplies that you can find around your home. Mix together PVA glue and clear nail polish using a cotton swab stick. Then apply the nail glue to either attach an artificial nail or to hold together a broken nail. Let the glue dry thoroughly for 10 minutes and then you can enjoy your DIY beauty hack!
Steps
-
Cut the end off a cotton swab stick. Get a cotton swab stick and a pair of sharp scissors. Position the scissors just above 1 end of the cotton swab stick, around where the cotton area begins. Cut the end off and discard it, but make sure to keep the rest of the cotton swab stick.
- This becomes a stirrer that you use to mix together the nail glue ingredients.
-
Place 1 cup of PVA glue into a bowl. Get an old bowl and a kitchen measuring cup. Measure out the PVA glue into the measuring cup and pour it directly into the bowl. Make sure to scrape the sides of the measuring cup so that you use up all of the glue.
- You can choose either white or clear glue, as the color doesn't affect how the glue works.
Advertisement -
Add 1 ⁄ 4 fl oz (7.4 ml) of clear nail polish to the bowl. Get a kitchen measuring spoon. Remove the cap on the bottle and pour the clear nail polish into the measuring spoon. Then add the clear nail polish into the bowl with the PVA glue.- 1 ⁄ 4 fl oz (7.4 ml) of clear nail polish is approximately half of a standard size bottle.
-
Mix together the ingredients for 2-3 minutes using the cotton swab. Position the cotton swab stick so that the wooden end is in the bowl with the ingredients. Mix the PVA glue and the clear nail polish thoroughly until they are well combined. You may need to scrape the sides of the bowl with the cotton swab stick to ensure that all of the ingredients are mixed in properly.
- Hold the cotton swab stick by the end with the cotton.
Advertisement
-
Apply the nail glue to your whole nail if you are adding an artificial nail. Dip the wooden end where you cut off the cotton into your homemade nail glue to get a small dollop of glue on the stick. Start at your nail cuticle and gently wipe the nail glue over your nail towards the free edge. Use even strokes to apply the glue thoroughly over your whole nail.
- Avoid using the other end of the cotton swab stick as you may get small pieces of cotton stuck to your nail.
-
Press the artificial nail into the glue for 10 seconds. Position the artificial nail over your real nail and make sure it aligns properly with your nail. Press down on the nail firmly for 10 seconds to help it stick to the glue. Try not to move your hand while you're holding the artificial nail in place, as this could cause it to slip.
- This ensures that the artificial nail sets in the right spot.
-
Paint the nail glue directly over a split to repair a split nail. If you want to hold together a split or broken nail, then you don't need to apply the nail glue to your whole nail. Simply dip the wooden end of the cotton swab stick into the nail glue mixture and then apply a thin coating over the broken part of your nail.
- The nail glue won't heal the broken nail, but it will help to hold it together and to prevent it from breaking further.
Advertisement
-
Let the nail glue dry for 10 minutes. Regardless of if you used your homemade nail glue to apply an artificial nail or to fix a broken nail, the glue won't take long to dry properly at all! Rest your hand that has the glue on it on a flat surface. Try not to move your hand while the glue is drying to prevent the artificial nail from moving out of place or to damage the repair.
- If you used the glue to stick on an artificial nail, press on it gently when you think the glue is dry to check that the nail has set properly.
-
Store leftover nail glue in a clean nail polish bottle to use at a later stage. If you are left with excess homemade nail glue, it doesn't have to go to waste! Take a brand new, empty nail polish bottle and pour the homemade nail glue inside. Then screw the nail polish brush on tightly to secure the bottle and to ensure that the nail glue doesn't dry out. [1] X Research source
- Alternatively, you can clean out an old nail polish bottle by soaking it in nail polish remover and then rinsing the bottle out with water thoroughly. Let the nail polish bottle dry completely before you pour the nail glue inside. Make sure to clean the brush too!
-
Soak your nails in nail polish remover for 45 minutes to remove the glue . It's easy to remove your artificial nails or even just the glue alone! Pour nail polish remover into a bowl and hold your fingers in the bowl. Once the artificial nails have come off and the glue has dissolved, wash your hands with soap and warm water.
- Make sure that the nail polish remover contains acetone, as this is necessary to dissolve the glue.
Advertisement
Community Q&A
Search
-
QuestionWill this damage my nails?Community AnswerDefinitely be careful with homemade nail glue. It may not be as sturdy as store-bought glue, and if you have easily cracked or brittle nails, I would recommend applying a nail strengthener before applying glue and acrylic nails.
-
QuestionWhat do I do if I don't have clear nail polish?Community AnswerIf you will be covering the nail glue with an acrylic nail, then it works just as well to use a colored nail polish of the same consistency that dries as hard as a clear polish would.
-
QuestionHow many days will the nail glue last?Community AnswerThe nail glue will last about two weeks.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Use tape around the nail while applying the glue. This will keep it off of your skin.Thanks
- If you are concerned that the nail glue is drying in the bowl while you're working, stir it every few minutes with the cotton swab stick.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- I always like to "test" the glue. To do this, I usually place the nail or nail tip underwater for a couple of seconds after the glue has dried to see how strong the hold is.
- If you want your press-on nails to last longer, wear gloves when washing dishes or touching liquid.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Cotton swab stick
- Scissors
- PVA glue
- Clear nail polish
- Bowl
- Measuring cup
- Measuring spoon
- Artificial nails
- Clean nail polish bottle
- Nail polish remover
References
About This Article
Article Summary
X
To make nail glue at home, first cut off one end of a cotton swab to make a stirring stick. Fill a small bowl with 1 cup (237 mL) of PVA glue, also known as white school glue. Mix in ¼ ounce (7.4 mL) of clear nail polish. Stir the ingredients together for about 2-3 minutes with the cut-off end of the cotton swab. Paint a layer of the glue onto your nail with the same end of the cotton swab, then press on an artificial nail and hold it in place for 10 seconds. It should take about 10 minutes for the glue to dry completely. If you have extra glue left over, store it in a clean nail polish bottle. Soak your nails in an acetone-based nail polish remover for 45 minutes to dissolve the glue and remove your fake nails. When you’re done, wash your nails with soap and water. For tips on how to remove nail glue, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 132,192 times.
Advertisement
