How to Make Samurai Armor

PDF download Download Article
PDF download Download Article

Samurai armor can look intimidating to make, but with a little creativity, it can be quite easy. All you need to make a chest plate is some cardboard or craft foam, fake leather, lots of glue, and colorful cording. If you have enough supplies, you can use the same techniques to make other pieces, such as a helmet, shoulder pads, and skirt.

Part 1
Part 1 of 4:

Making the Chest Plate

PDF download Download Article
  1. Take a t-shirt and tuck the sleeves inside. Place the shirt onto a large sheet of cardboard and trace around it with a pen, making it longer at the hem. Put the shirt away when you are done.
    • You are making the chest plate longer because you will be cutting it apart and overlapping it.
    • You can also use craft foam or EVA foam. The type used on yoga mats may also work.
  2. Draw 7 horizontal lines across your pattern to divide it into 8 equal-sized sections. These will make the overlapping horizontal plates.
    Advertisement
  3. The top piece will be F1 and the bottom piece will be F8. This will help you keep track of your pieces. The "F" will strand for "Front." You will be making another set of plates for the back shortly [1]
  4. Lay the pattern pieces out on a sheet of fake leather. Trace around them, adding ½ to 1-inch (1.27 to 2.54-centimeter) seam allowances. Cut the fake leather out, then clip the corners to help reduce bulk. [2]
    • Cut notches into the collar of the top piece. This will prevent wrinkling.
    • Number the fake leather pieces on the back so that they match up with the cardboard pieces.
  5. Lay a piece of fake leather on a flat surface, wrong side up. Coat it with glue, then place a matching cardboard piece on top, number side up. Wrap the edges of the fake leather around the edges of the cardboard piece. Repeat this process for the other pieces. [3]
    • You may need to secure the edges with a fast-dying glue, such as hot glue.
    • If the fake leather won't stay down, you can secure it with clips.
  6. This time, number the pieces B1 through B8. You will also want to make the shoulders on the back piece longer. This will make the chest plate easier to assemble.
    • You can use a similar method to make upper arm pads and a paneled skirt. Make these using a rectangle base.
    7. Advertisement
Part 2
Part 2 of 4:

Assembling the Chest Plate

PDF download Download Article
  1. You can do this with a hammer and a nail. Each narrow edge needs to have two rows of six holes. Make the holes towards the bottom half of the collar piece (F1). Make the holes towards the top half of the other pieces (F2 through F8). This will allow you to overlap them upwards, like reverse shingles on a roof. [4]
    • You can make more sets of holes down the middle of each chest plate segment for more detail. [5]
  2. Cut two long pieces of colored cording. Thread the cords through the first set of holes. Start from the front of the piece so that the cords come out the back. Leave a couple of inches of cording at the front; you'll need this to assemble the armor. [6]
    • Don't worry about the right side of F1 just yet.
  3. Cross the left cord over and thread it down through the next right hole. Cross the right cord over and thread it down through the next left hole. They should form an X shape. [7]
  4. Bring the left cord up through the next left hole. Bring the right cord up through the next right hole. You do not need to cross the cords, since this is the back of the piece. [8]
  5. Make sure that the top edge of F2 is covering the bottom edge of F1. Push the cords up through the first set of holes on F2. [9]
    • Don't worry about the right side of the plates just yet.
  6. Cross the cords, right over left, and bring them down through the next set of holes. Push them up through the left set of holes on F2, and up through the first set of holes on F3. Keep lacing the pieces in this manner until you reach the bottom of F8. [10]
  7. Leave a couple of inches/centimeters on each cord. This will allow you to tie the armor together at the waist.
  8. Once you have that done, you can lace the back plate together. Punch two holes into the top edge of each shoulder on the back piece so that you can assemble the armor later.
  9. Thread the cord tails from the top of the chest plate (F1) through the holes on the shoulder straps of the back piece (B1). Tie the cords together on each shoulder into a tight knot. If you don't plan on adding any other pieces, trim them off.
    • If you made arm pads and a skirt, you can lace them together in a similar fashion.
    • If you made arm pads, use the tails from connecting the shoulder straps to secure them. The cords into knots, then trim them off. [11]
    10. Advertisement
Part 3
Part 3 of 4:

Making the Helmet Base

PDF download Download Article
  1. Buy a hard hat from the store, and paint it black using spray paint. You don't have to paint the inside, but you should paint the underside of the brim. [12]
  2. The strips need to be long enough to extend from the top of the helmet down to the brim. Use a craft blade and a straight edge to make the strips neat and straight. Plan on making them about ⅛ to ¼-inch (0.32 to 0.64-centimeter) wide. [13]
    • You can also use gold cording or ribbon instead.
  3. You can do this with spray paint or acrylic paint. You only need to paint one side, but you should paint the top and side edges.
    • If you used gold cord or ribbon, you can skip this step.
  4. Apply the hot glue directly to the back (unpainted) side of foam piece. Press the foam against the side of the helmet. Hot glue sets up quickly, so only work 1 to 2 inches (2.54 to 5.08 centimeters) at a time. Glue all of the strips to the helmet, making sure that they are evenly spaced. [14]
  5. Find a fancy coat button and paint it gold to match the vertical strips on the helmet. Hot glue it to the top of the helmet. Not only does this act as an ornament, but it helps hide the part where all of the strips connect. [15]
  6. Use the same technique and materials as you did for the chest plate. Cut out four rectangles long enough to wrap around half of the helmet's brim; each one needs to be a little longer than the previous one. Cover and lace them together using the same technique as you did for the chest plate. The shortest rectangle goes on top, and the largest goes on the bottom. [16]
    • For added support, add another set of lacing holes down the middle of each neck protector segment.
    • If you don't have enough of the base materials left, try one of the following: cardboard, cardstock, poster paper, or craft foam for the base rectangles.
    • If you don't have enough fake leather left, you can paint the base material to match the helmet instead.
  7. There are two ways that you can do this. You can punch holes in the bottom of the helmet, then thread the cords from the neck protector through the holes and tie them into knots. You can also glue the neck protector to the back of the helmet using hot glue or industrial-strength glue.
    8. Advertisement
Part 4
Part 4 of 4:

Adding the Crest and Mask

PDF download Download Article
  1. This is one of the most important features on a samurai helmet. Cut a circle and a crescent moon shape out of craft foam. The crescent needs to be about the same height as the helmet, or taller. The circle needs to be small enough to side inside the crescent, a few inches across.
    • You can also make the crescent using lines that curve inward then out, like horns. [17]
  2. Turn the crescent on its side, so that it looks like a U. Place the circle on top, making sure that the bottom edges match up. Hot glue the circle in place. [18]
    • The circle needs to be small enough to fit inside the moon's cusp.
  3. You can do this with spray paint or acrylic paint. Make sure that you get the edges of the foam as well. If you want to, you can draw details onto the crescent moon, such as a dragon.
  4. Place a large swirl of hot glue on the back of the crest. Press it against the helmet, right above the front brim. The prongs of the crescent moon should be pointing upwards.
  5. You can find them in costume shops and online. [19] You can also make your own by buying a full-face mask from the craft store, then doing the following:
    • Cut out the mouth in a rectangle shape.
    • Cut off the top part, about mid-cheeks and up, but leave the nose bridge intact.
    • Cover the mask with paper mache.
    • Sculpt over it using paper clay or paper mache paste. Use pictures of real samurai masks for reference.
    • Paint the mask black.
  6. If you added teeth to your mask, paint them white. You can also paint the lips reddish, or another dark color. Some masks have mustaches. Gather some stiff bristles and tie them together in the middle with string. Hot glue the mustache to the upper lip, just below the nose. If your mask didn't come with straps, add a strong piece of elastic to the back so that you can wear it under the helmet. [20]
    7. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Does the hard hat need to have a large, slanted brim or should it not have a brim at all?
    Community Answer
    It should not have a brim.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 34 Helpful 27
  • Question
    Can I attach a samurai crest to the armor?
    Community Answer
    It's your armor! Take inspiration from images of real armor online and make it look however you like!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 30
  • Question
    Where would I get all of these materials?
    Sylghouls
    Top Answerer
    Most, if not all of the materials listed in this article could be purchased at any craft store. If you can't find them, try online retailers, like Amazon or eBay.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 22
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Add eyelets into the shoulder holes for extra strength. [21]
        Thanks
        Helpful 0 Not Helpful 0
      • The plates on all the pieces need to be overlapping upwards, like reverse shingles. [22]
        Thanks
        Helpful 0 Not Helpful 0
      • When you cross the cords over, make sure that you always cross them over in the same direction. This will make your work look neater. [23]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Cardboard
      • Pleather/fake leather
      • Scissors
      • Glue
      • Hammer and nail
      • Paracord
      • Hard helmet
      • Spray paint, gold and black
      • Plastic samurai mask or full face mask
      • Paper clay (optional)
      • Button or other ornament
      • Craft foam

      You Might Also Like

      How to
      Get DIY Gray Hair with Powder, Greasepaint & More
      How to
      Tie a Lasso
      How to
      Dress up Like a Gangster
      How to
      Disguise Yourself
      How to
      Make a Fake Beard
      How to
      Dress Like a Stripper
      How to
      Make Shrek Ears
      How to
      Dress up Like a Girl: Everything You Need to Know
      How to
      Make a Nun Costume
      How to
      Make a Pirate Costume
      How to
      Look Like You're a Professional Computer Hacker
      How to
      Dress Like a Pirate
      How to
      Make a Sun Costume
      How to
      Make a LEGO Costume
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about Samurai costumes, check out our in-depth interview with Alina Bokovikova .

      References

      1. ↑ http://kay115.deviantart.com/art/How-to-make-Samurai-Armour-133889139
      2. ↑ http://kay115.deviantart.com/art/How-to-make-Samurai-Armour-133889139
      3. ↑ http://kay115.deviantart.com/art/How-to-make-Samurai-Armour-133889139
      4. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      5. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      6. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      7. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      8. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      9. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      1. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      2. ↑ http://kay115.deviantart.com/art/How-to-make-Samurai-Armour-133889139
      3. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      4. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      5. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      6. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      7. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      8. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-kabuto-samurai-helmet.html
      9. ↑ https://www.youtube.com/watch?v=HlcEdkcqtRY
      10. ↑ https://www.youtube.com/watch?v=JnQofqtGG3o&t=214s
      11. ↑ http://www.ruebenberge.de/japanese-armour-kydex/making-men-yoroi-mempo-face.html
      12. ↑ https://www.youtube.com/watch?v=2UPD7SC6bbk
      13. ↑ https://www.youtube.com/watch?v=2UPD7SC6bbk
      14. ↑ https://www.youtube.com/watch?v=2UPD7SC6bbk

      About This Article

      Article Summary X

      To make samurai armor, take a t-shirt, tuck the sleeves in, place it on a sheet of cardboard, and trace out the shape. After you've cut out the shape, divide it into eight segments by drawing seven lines across the cardboard, then cut them out and number them F1 to F8 for front plates. Glue fake leather on the front of each piece, and wrap the leather around the panels’ edges. Repeat the process and number the back plates B1 through B8. To learn how to assemble your armor, create a samurai helmet, and design a samurai crest, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 157,323 times.

      Did this article help you?

      Advertisement