Download Article
Learn to make a five-decade and single-decade rosary
Download Article
The rosary is a scripture-based prayer in the Catholic faith. Mary, the Mother of Jesus, asked us to pray the rosary as a meditation on the mysteries of Jesus' life. Each prayer corresponds to a bead on a string of beads also called a rosary. In this article, we’ll show you how to make a simple rosary with cord and beads, a more complex rosary made with a chain, and a single-decade rosary, or sacrifice beads.
Easy Way to Make a Rosary
Knot the end of a 3 ft (1 m) cord and string 10 Hail Mary beads, which corresponds to one decade. Tie another knot and string an Our Father bead. Repeat the process 4 times to represent all 5 decades. Tie the ends together, string the final 3 Hail Marys, and add the crucifix to the end.
Steps
-
Gather your supplies. A rosary is composed of a crucifix, 53 beads of one color to represent Hail Mary prayers, and 6 beads of another color to represent Our Father prayers. The crucifix and beads are strung in a pattern on sturdy string or thread or a chain. [1] X Research source
- Religious supply stores sell small crucifixes suitable for making rosaries. They also commonly sell beads to represent the Hail Mary and Our Father prayers.
- Waxed nylon cord is commonly used for making rosaries. Be sure to pick a cord that fits through the centers of the beads you’ve chosen. The beads should fit easily, but they shouldn’t be loose.
-
Sort the beads. Rosaries are divided into 5 “decades,” or sections, that contain 10 beads each, as well as a smaller section with 3 more beads. Divide the Hail Mary beads into 5 groups of 10 and one group of 3. Place the Our Father beads in a separate pile. [2] X Research sourceAdvertisement -
Knot the end of your cord. You’ll need about 3 feet (1 meter) of cord. Use a ruler and a pen to mark a dot about 6 inches (15.2 cm) from the end, then tie a knot over the dot to begin the rosary. The knot should be large enough to prevent the beads from slipping over it onto the other side of the cord. [3] X Research source
-
String 10 Hail Mary beads on the long end of the cord. Make sure they stack up on the long end of the knot and that there’s no chance they’ll be able to slip over to the other side. Tie a second knot at the end of the string of beads. [4] X Research source
- Leave a little space for the beads to slide, but not too much. When using the rosary , you should be able to slide the beads down slightly once each prayer is complete.
- If you’re struggling to tie the knot in a certain place, make a loose knot over the place you want to tighten it. Place a toothpick on the cord in the spot where the knot should go, then pull it tight and remove the toothpick.
-
String an Our Father bead after the second knot. This bead should be a different color from the 10 Hail Mary beads you have already strung. Tie another knot directly after the Our Father bead. [5] X Research source
-
Repeat the process with the other 4 decades. After tying a knot after the first Our Father bead, string 10 more Hail Mary beads. Then, tie a knot, string an Our Father bead, and tie another knot. Continue until you’ve strung all 5 decades with the exception of the final Our Father bead. Finish with a knot after the last set of 10 Hail Mary beads. [6] X Research source
-
Tie the ends together. Form a circle of beads by tying the 2 ends together after the first and last knot. You should have a circle of 5 decades with 2 string tails hanging loose.
- If your beads are large enough to slip over both tails, you may keep both strings intact.
- If your beads are too small to slip over both tails, trim the shorter tail with a pair of scissors. Use a dab of clear nail polish or glue to keep the last knot secure as you continue.
-
String the final beads and crucifix. String the last Our Father bead and tie a knot directly after it. Then, string the last 3 Hail Mary beads and tie another knot to keep them in place. Add the crucifix and secure it tightly by adding a double knot after you’ve strung it on the rosary. Use more clear nail polish or adhesive to keep it in place and clip the loose thread hanging off the knot. [7] X Research source
Advertisement
-
Gather your beads and chain. Rosaries are made with 53 Hail Mary beads of a single color, 6 Our Father beads of another color, and a crucifix. You’ll also need one 8-inch (20.32 cm) chain or fourteen 3-link pieces to string the beads together. [8] X Research source
- If you don’t have much experience with making jewelry or working with wire cutters, making a rosary with a cord might be the easier method.
- Find crucifixes and rosary beads at your local religious supply store.
-
Separate the beads into decades. Standard rosaries are divided into 5 “decades,” or sections, that contain 10 beads each, plus a smaller section of 3 beads. Sort the Hail Mary beads into 5 groups of 10 and one group of 3, and separate the Our Father beads into their own pile. [9] X Research source
-
Cut the chain, if necessary. If you’re using a single piece of chain, use wire cutters to cut every 4th link, creating 14 pieces with 3 links each. To keep the pieces from flying everywhere, hold the chain down in between the cutters and close the jaws so they hold the 4th link. Cover the area with your hand when you apply pressure. [10] X Research source
-
Mount each bead onto an eye pin. Eye pins have one looped end and one straight end. Place each bead onto a separate pin so it’s flush with the loop, then bend the straight end 90 degrees toward the bead so that it’s perpendicular to the loop. Use round nose pliers to grasp the end of the pin and roll it toward the bead to create a second loop. [11] X Research source
- Be careful not to use too much pressure, especially if you’re using glass beads, so you don’t chip the beads.
- Repeat this process for all 59 beads.
-
String the Hail Mary beads of each decade together. Connect each set of 10 by twisting one loop of each bead’s eye pin open with your pliers. Do not unroll the loop. Place the loop of the next bead on the open loop and twist it closed. Use the same technique to connect the set of 3 beads. [12] X Research source
- When stringing together the entire rosary, you’ll first string one Hail Mary decade, then a single Our Father bead, then another Hail Mary. Repeat this pattern for all 5 decades. The remaining 3 Hail Mary and 2 Our Father beads will hang below and attach to the crucifix.
-
Connect a piece of the chain to each Our Father bead. Use the same process from the previous step to open each loop of the 6 Our Father beads and connect a piece of the chain to each loop. [13] X Research source
-
Attach the bead sections to form the rosary. Using the same twisting method, attach a chain piece to the end of the first decade. Connect the chain from one end of an Our Father section to the other end of the first decade. Attach the other end of the Our Father to another decade. Continue these steps until all decades have been strung together, separated by 4 Our Fathers. [14] X Research source
-
Connect the decades to the center. A rosary center is a 3-way connector that the crucifix will hang from. Add the last piece of chain to the end of the last decade. Then, twist open a jump ring and use it to connect one end of the decade chain to one of the center’s top loops. Repeat with the other end of the decade chain. [15] X Research source
-
Attach the 5 remaining beads and the crucifix. Keep using the same method to connect the last 2 Our Father beads to the 3 Hail Marys. Then, open another jump ring and connect this string of beads to the bottom loop of the center. Open the crucifix’s jump ring and connect it to the other end of the beads. [16] X Research source
- Align the loops of the Our Father above the crucifix so that they face the same direction. This allows the crucifix and the center to face the same way.
- After connecting everything, go through all the loops to make sure they’re tight.
Advertisement
-
Gather your supplies. A single-decade rosary, or sacrifice beads, consists of 10 Hail Mary beads and 1 Our Father bead. These can all be the same color, or you can choose a separate color for the Our Father. You’ll also need string, 2 additional spacer beads , a crucifix, and a saint medallion . [17] X Research source
- You should be able to find the crucifix, medallion, and prayer beads at your local religious supply store.
-
Cut the string and thread the medallion. Cut a 3-foot (91.44 cm) length of string and fold it in half. Insert the looped end through the hole of the medallion from front to back, then put the 2 cut ends through the loop. Pull tightly to create a knot. [18] X Research source
-
Thread the Hail Mary beads. Keep each end of the thread separate and slide a bead onto the left thread. Then, insert the right thread through the bead, but in the opposite way so that the ends of the string form an X inside the bead. Pull the threads in opposite directions to tighten and slide the bead down to the medallion. Repeat the process for the other 9 Hail Mary beads. [19] X Research source
- Adjust each bead individually so they lay horizontally and ensure the thread is tight. Trim the ends of the threads so they’re even.
-
Attach the Our Father bead. After placing the last Hail Mary bead, hold both ends of the string together and run them through a spacer bead. Add the Our Father bead the same way and follow up with the second spacer bead. [20] X Research source
-
Tie on the crucifix. Hold both ends of the string together and thread them through the hole at the top of the crucifix. Pull the crucifix up toward the spacer bead, and hold your finger along the spacer bead and the top of the crucifix. Loop the threads around your finger and insert the ends of the threads through the loop to form a knot. Tie a second knot the same way and pull to tighten. [21] X Research source
- Use pliers to tighten the knots, then use scissors to trim the thread as close to the knot as possible.
-
Attach a jump ring and clasp to the medallion. Use pliers to twist the jump ring open and insert the lobster claw clasp onto it. Then thread the open jump ring onto the opening at the top of your medallion and pinch it closed with the pliers.
- If your medallion only has the hole you threaded the string through, you can attach the clasp there as well.
Advertisement
Rosary Prayer
Community Q&A
Search
-
QuestionCan I use two differently-shaped beads of the same color for my Hail Mary beads?Community AnswerThat's fine, it's the prayer that's the important part.
-
QuestionTo whom did Mary give the string of beads?Community AnswerMary gave the rosary to Saint Dominic, the founder of the Order of the Preachers, in 1214.
-
QuestionDo rosaries have to be blessed?Grace ColebournCommunity AnswerNot to pray them, but to have them blessed is a good and typical thing to do. Blessing the rosary beads allows them to become a Sacramental, which is a special outlet of graces instituted by the Church. But you can still pray the rosary on unblessed beads.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- It is customary to have a priest bless the rosary before you use it to pray. Take the rosary to your parish and ask the priest to say a blessing, then use the rosary or give it away.Thanks
- You can say the rosary whenever you've got a few spare minutes. Say a decade as a moment of prayer to Mary.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Keep beads and string away from small children or pets.Thanks
Advertisement
Things You'll Need
Cord Rosary
- 59 rosary beads (53 Hail Mary beads and 6 Our Father beads)
- String or thread
- Crucifix
- Ruler
- Clear nail polish or glue
- Scissors
Chain Rosary
- 59 rosary beads (53 Hail Mary beads and 6 Our Father beads)
- One 8-inch chain (or fourteen 3-link pieces)
- Crucifix
- Rosary center
- Wire cutters
- Eye pins
- Round nose pliers
- Jump rings
Single-Decade Rosary
- 11 rosary beads (10 Hail Mary beads and 1 Our Father bead)
- 2 spacer beads
- String
- Crucifix
- Saint medallion
- Scissors
- Pliers
- Jump ring
- Lobster claw clasp
References
- ↑ https://restorationbeauty.com/how-to-make-a-rosary-chain/
- ↑ https://restorationbeauty.com/how-to-make-a-rosary-chain/
- ↑ https://youtu.be/68NoDSvq1ns?t=19
- ↑ https://youtu.be/68NoDSvq1ns?t=56
- ↑ https://youtu.be/eAC90s32Z-Q?t=146
- ↑ https://youtu.be/eAC90s32Z-Q?t=172
- ↑ https://youtu.be/68NoDSvq1ns?t=314
- ↑ https://restorationbeauty.com/how-to-make-a-rosary-chain/
- ↑ https://restorationbeauty.com/how-to-make-a-rosary-chain/
- ↑ https://restorationbeauty.com/how-to-make-a-rosary-chain/
- ↑ https://www.rosary-making.com/media/New%20Illustrated%20pin%20rosary%20making%20instructions%203.pdf
- ↑ https://www.rosary-making.com/media/New%20Illustrated%20pin%20rosary%20making%20instructions%203.pdf
- ↑ https://www.beadinhand.com/uploads/3/4/3/7/34378692/pdfrosary__making_tips2.pdf
- ↑ https://www.rosary-making.com/media/New%20Illustrated%20pin%20rosary%20making%20instructions%203.pdf
- ↑ https://www.rosary-making.com/media/New%20Illustrated%20pin%20rosary%20making%20instructions%203.pdf
- ↑ https://www.rosary-making.com/media/New%20Illustrated%20pin%20rosary%20making%20instructions%203.pdf
- ↑ https://thelittleways.com/how-to-make-sacrifice-beads
- ↑ https://youtu.be/-YgvbjWWRmk?t=73
- ↑ https://thelittleways.com/how-to-make-sacrifice-beads
- ↑ https://thelittleways.com/how-to-make-sacrifice-beads
- ↑ https://thelittleways.com/how-to-make-sacrifice-beads
About This Article
Article Summary
X
To make a rosary, you’ll need waxed nylon cord, 53 Hail Mary beads of one color, 6 Our Father beads of another color, and a crucifix. Tie a knot about 6 inches from the cord’s end so the beads don’t slip off. When you’re cord is knotted, string 10 Hail Mary beads and then make a knot. After this section, string an Our Father bead followed by another knot. Repeat this pattern until you’ve made 5 sections, finishing on the last set of 10 Hail Mary beads and a knot. Once you’re done, tie the ends of the cord together and leave 2 string tails hanging loose. Add the last Our Father bead and make a knot. Then, string the last 3 Hail Mary beads and make a knot. To finish the rosary, tie on the crucifix. For more help, including how to get your rosary blessed, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 248,250 times.
Reader Success Stories
- "It looks really simple and fun to do. I'm going to try it out."
Advertisement
84%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It looks really simple and fun to do. I'm going to try it out."
"Easy to follow instructions."
