Download Article
Download Article
Water is essential to life. This technique is very useful when you are hunting to survive. People can live up to a week without food, but only two to three days without water. Clean water can be hard to find if you get stranded in the wild or if there is an emergency. If you have to find your own water supply, you must be able to strain out impurities that can make you sick. This article will tell you how to make a water filter.
Steps
-
Gather your supplies. You will be making a water filter that relies on layers to make dirty water clean. If you plan on drinking this water, you will need to boil it after you have filtered it. Here is a list of what you will need: [1] X Research source
- Plastic bottle with a cap
- Craft knife
- Hammer and nail
- Coffee filter
- Large cup or mug (Either one works)
- Activated charcoal
- Sand
- Gravel
- Container to catch the water (jar, cup, mug, etc)
-
Use a craft knife to cut the bottom inch (2.54 centimeters) or so off of the plastic bottle. Stick the knife into the side of the bottle, and start cutting it slowly. You may find that making short, back-and-forth cuts (like sawing) may be easier. [2] X Research source- If you are a child, ask an adult to help you with this step
- Add handle so that you can hang it while it filters the water. Start by poking two holes near the cut edge of the bottle. Make the holes opposite of each other. Thread a piece of string through the two holes. Tie the string in a knot.
Advertisement -
Use a hammer and nail to punch a hole in the cap. The hole will help slow down the flow of water and make the filter more effective. If you don't have a hammer or nail, use a craft knife to stab an X shape into the bottle cap.
-
Put the coffee filter over the mouth of the bottle and tighten the cap over it. The coffee filter will keep the activated charcoal inside the bottle and keep it from falling out. The cap will hold the coffee filter in place. [3] X Research source
-
Put the bottle cap-side-down into a mug or cup. This will help keep the bottle steady while you fill it. If you don't have a cup or mug, then you can place the bottle down on a table. You will need to hold it steady with one hand.
-
Fill the bottom third of the bottle with activated charcoal. If the charcoal comes in large pieces, you will need to break them down into smaller pieces. Do this by putting the chunks inside a bag, and crushing them with a hard object (such as a hammer). You don't want the chunks to be larger than a pea.
- Charcoal can get very dirty. You can keep your hands clean by wearing some gloves.
-
Fill the middle of bottle with sand. You can use any type of sand you want, but avoid using colored craft sand. Colored sand may leak dyes into the water. Try to make the sand layer about as thick as the charcoal layer. The bottle should be a little more than half-way full by now. [4] X Research source
- Try using two types of sand: a fine grained sand and a coarse grained sand. The finer sand will go first, on top of the charcoal. The coarse grained sand will go next, on top of the fine-grained sand. This will create more layers for the water to pass through, and help make it cleaner.
-
Fill the rest of the bottle with a gravel. Leave an inch (2.54 centimeters) or so of empty space between the gravel and the cut part of the bottle. Do not fill the bottle all the way with gravel, or the water may spill over if it does not drain fast enough. [5] X Research source
- Try using two types of gravel: a fine grained gravel and a chunky gravel. The fine grained gravel will go first, on top of the sand. The chunky gravel will go next, on top of the fine gravel.
Advertisement
-
Choose a jar to catch the filtered water. Make sure that the jar is clean and large enough to hold the water you plan on filtering. If you don't have a jar, try using a bowl, cup, pot, or a mug.
-
Hold the filter over the container. The cap should be pointing towards the bottom of the container. If your jar has a large opening, try setting the water filter down on top of it. This way, you won't need to hold the filter. If you made a handle for your filter, hang the filter up now. Place the jar right under it.
-
Pour water into the filter. Make sure that you pour slowly. This way, the water will not overflow. If the water starts to reach the top of the filter, stop and wait for the water level to go down. Once you can see the gravel again, pour some more water.
-
Wait for the water to flow into the jar. This will take about seven to ten minutes. As the water passes through the different layers, it will become cleaner.
-
Pour the water back through the filter if it is not clear. Once the water stops dripping, take the jar out from under the filter. Slide a new jar under the filter, then pour the filtered water back over the gravel. You may need to repeat the filtering process two or three times before the water runs clear.
-
Boil the water for at least one minute to make it safe to drink. The water will also still contain dangerous bacteria, chemicals, and microorganisms. You can get rid of all these by boiling the water for at least one minute. [6] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- If you are higher than 5,000 feet (1,000 meters) above sea-level, you will need to boil the water for at least three minutes. [7] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
-
Let the water cool before storing it in a clean, air-tight container. Do not leave the water standing for long, or new bacteria may form inside it.
Advertisement
-
Make cloudy water clear again by pouring it through a coffee filter. Get a round, cup-shaped coffee filter and turn it upside down so that it fits over a cup like a lid. Wrap a rubber band around the coffee filter to keep it in place. Slowly pour the cloudy water over the coffee filter. Boil the water afterwards to make it drinkable.
- If you don't have a coffee filter, use a paper towel or a piece of cotton fabric instead. Make sure that the square is big enough to fit over the mouth of the cup. Try to use white fabric or a blank paper towel. Colored fabrics and paper towels contain dyes, which may bleed into the water.
-
Make a water filter using a fruit peel. Fruit peels have the ability to absorb bacteria. Peel a banana, and grind the peel in a blender. You may discard the banana or eat it; you won't need it for the filter. Once the peel is blended, put it into a coffee filter. Hold the filter over a cup. Pour water through the coffee filter. The banana peels will help absorb bacteria, and the coffee filter will help make the water clear again. [8] X Research source
-
Make a plant xylem filter using a water bottle and a pine branch. Sapwood, such as pine, contains xylem, which can absorb and filter out dirt and bacteria. It can remove up to 99.9% of bacteria from water, but will not remove viruses such as hepatitis and rotavirus. [9] X Trustworthy Source PLOS ONE Online peer-reviewed, open access scientific research journal Go to source > You will need to boil the water after filtering it to make it safe to drink. Here's how to make a xylem filter: [10] X Research source
- Cut a 4 inch (10.16 centimeters) long piece from a pine tree branch.
- Peel off the bark, and make sure that it can fit into the neck of the bottle. If it is too wide, shave it down using sandpaper or a pocket knife.
- Slide the first inch (2.54 centimeters) or so of the stick into the neck of the bottle.
- Cut the bottom of the bottle off and turn the bottle upside down.
- Fill the bottle with water, and let the water drain through the stick.
- Do not let the stick dry out. If it dries out, it won't be as effective. [11] X Trustworthy Source PLOS ONE Online peer-reviewed, open access scientific research journal Go to source
Advertisement
Community Q&A
Search
-
QuestionHow does the gravel, sand, and charcoal filter work?Community AnswerEach time the water passes through a different layer, it becomes cleaner. First, the gravel layer catches large pieces of debris, such as twigs, leaves, and bugs. Next, the sand layer catches smaller particles, such as dirt and grit, and makes the water look clean. Finally, the charcoal layer gets rid of bacteria and some chemicals.
-
QuestionWhat makes activated charcoal so special?Community AnswerActivated charcoal is made a little differently from regular charcoal. It has oxygen added back to it. This makes it more porous thus better at filtering impurities. It is commonly used in water filters and aquarium filters.
-
QuestionWhy do I have to boil the water before I drink it? Isn't filtering enough?Community AnswerUnfortunately, filtering is not enough. Some types of microbes, bacteria, and viruses are too small to be filtered out. They can only be killed by very high temperatures.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If the boiled water tastes flat, try adding a pinch of salt. You can also pour the water back and forth between two, clean containers a few times. [12] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
- If you can't find a coffee filter, try using crumpled cotton fabric, or some pillow/teddy bear stuffing.Thanks
- Rather than making a filter with a thick layer of charcoal, sand, and gravel, try making a filter with many thin layers of charcoal, sand, and gravel. Keep repeating these layers until you reach the rim of the bottle.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Filtering water does not make it safe to drink. Always purify the water before using it for drinking, cleaning, and preparing food.Thanks
- Always boil your filtered water before using it for brushing teeth, cooking, drinking, making drinks (ie: coffee or tea), and washing dishes. [13] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
Advertisement
References
- ↑ https://extension.usu.edu/waterquality/files-ou/Lesson-Plans/Homemade-water-purifier.pdf
- ↑ https://www.jpl.nasa.gov/edu/learn/project/make-a-water-filter/
- ↑ https://www.jpl.nasa.gov/edu/learn/project/make-a-water-filter/
- ↑ https://extension.usu.edu/waterquality/files-ou/Lesson-Plans/Homemade-water-purifier.pdf
- ↑ https://extension.usu.edu/waterquality/files-ou/Lesson-Plans/Homemade-water-purifier.pdf
- ↑ https://www.epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water
- ↑ https://www.epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water
- ↑ https://iopscience.iop.org/article/10.1088/1742-6596/1349/1/012011
- ↑ https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0089934
- ↑ https://www.technologyreview.com/2013/10/24/175624/how-to-build-a-plant-xylem-water-filter/
- ↑ https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0089934
- ↑ https://www.epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water
- ↑ https://www.epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water
About This Article
Article Summary
X
To make your own water filter, use a craft knife to cut the bottom inch off of a plastic bottle, then punch a hole in the bottle cap with a hammer and a nail. Place a coffee filter over the mouth of the bottle and tighten the cap over it, then put the bottle upside-down into a mug or cup. Fill the bottom third of the bottle with activated charcoal, the middle third with sand, and the top third with gravel. To use the filter, pour water into the bottle and let it drip through the hole in the cap. Read on to learn how to make a filter out of a coffee filter and a banana peel!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,201,042 times.
Reader Success Stories
- "I had to do a science project where I had to make a homemade water filter, and I can't find this stuff anywhere, so really it is helpful on how to make and what to use. But I can't find this stuff anywhere, like the sand and gravel." ..." more
Advertisement
"I had to do a science project where I had to make a homemade water filter, and I can't find this stuff anywhere, so really it is helpful on how to make and what to use. But I can't find this stuff anywhere, like the sand and gravel."
..."
more
"I needed a simple water filter design for STEM fest Brisbane, and this is the perfect one. All the other ones were too complex, but when I found this one, it blew me away at how simple it was with all the videos. Thanks."
..."
more
"I needed to make a filter for a science project and all the ones I found were the same until I found this one! The pine branch looks like a really cool idea and it looks like it works too."
..."
more
"I used the charcoal, sand and gravel on my fishing/hunting trip, but I used 3, 20 oz. containers each filled with the individual ingredients so I could filter lots of river water quickly."
..."
more
"My kids are making a science fair project, and this is very apt for them because they love the outdoors. They are First Nations people who love camping, and water is very vital for them."
..."
more
