Download Article
Save your nails with these handy soda opening hacks
Download Article
The invention of the tab made it super easy to open a can of soda, but what can you do if the tab breaks off before you get to enjoy your pop? Luckily, you can use a can piercer, butter knife, or another can of soda to pierce through the aluminum—and we’ll show you how! Keep reading to discover the easiest ways to open a soda can using everyday objects in your home.
Simple Soda Can Hacks
Place the tip of a butter knife against the line where the tab opens the can, and apply pressure until the aluminum breaks. Alternatively, stack one can of soda on top of another, then tilt the top can so the ridge hooks under the tab of the bottom can. Pull the top can away from your body to open the bottom can.
Steps
-
Place the index finger of your dominant hand under the tab’s ring. This is the upper portion of the tab with a hollowed out center, closest to the edge of the can. Your finger goes behind the top of the tab. [1] X Research source
- The opposite end of the tab will be more in the center, and it will be the end to physically open the indentation.
- If you can't get your finger under the tab, use a butter knife or another flat object to pry the tab up.
-
Rest your thumb on top of the tab to maintain your grip. Using the same dominant hand, put your thumb on the very center of the can. This should be on the bottom of the tab, helping to direct it.Advertisement -
Hold the can with your other hand to keep it in place. This is super important so that you don’t end up spilling your drink everywhere. Grasp the side of the can so the tab is facing you, making it easier for you to open it.
- Place the can on a stable surface to avoid spilling it.
-
Lift the backside of the tab using your thumb and index finger. Your thumb will be pressing down on the can while your index finger lifts up the back of the tab. You’ll feel resistance, but keep lifting the tab up until you pierce the opening of the can.
- Make sure you have a firm grasp on the can with your other hand while lifting the tab to prevent the can from moving.
- The bottom of the tab will put pressure on the part of the can that opens, making a hole once the aluminum is pierced.
-
Push the tab back down, if desired. Once you’ve lifted the tab completely, the hole in the can should be open and the tab will be vertical. You can push the tab back down to its original position to get it out of the way, making it lay flat again. [2] X Research source
Advertisement
-
Create a hole in the can using a can piercer. Can piercers have a sharp end in the shape of a triangle, allowing you to make holes in aluminum. Place the pointy end against the top of the can (it doesn’t matter where), and hold the can in place with your other hand. Use pressure to pierce the can and form a hole. [3] X Research source
- Pour the drink into a glass or cup, if possible, to avoid cutting your lip on the pierced opening.
-
Alternatively, rub the lid of the can using a skinny, blunt object. Use the object, such as a marker or key, to create friction against the front of the indentation—right where your lips would go when you’re taking a sip of the drink. Rub the object back and forth quickly on this spot until the lid bursts open while holding the can steady with your other hand. [4] X Research source
- This method often creates a loud pop when successful.
- Make sure the object isn’t sharp—you’re trying to create friction, not tear the lid open with the object.
-
Or, use a blunt butter knife to push the indentation open. Find the light line where the tab would open the can, breaking the aluminum. Place a butter knife right on the edge of this line while holding the can steadily with your other hand. Apply pressure with the knife until it creates an opening, similar to how the normal tab would work. [5] X Research source
- Face the butter knife away from you to avoid hurting yourself.
- Alternatively, use a flathead screwdriver to open the can.
Advertisement
-
Stack one can of soda on top of another can. They don’t have to be the same brand of soda, as long as both cans have a circular ridge at the bottom. Place the bottom can on a flat surface to avoid any spills. [6] X Research source
- This is a viral method from TikTok, with more than 1.3 million likes on the original tutorial. It’s also a great hack if you just got a manicure and want to preserve your nails !
-
Tilt the top can back so the ridge hooks under the tab of the bottom can. Think of the bottom ridge of the can as the tip of your finger—it needs to go underneath the tab so you can open the soda. Position the ridge in the center of the tab, or slightly off center, to get enough leverage to lift the tab up. [7] X Research source
- It might take a few tries to correctly position the ridge underneath the tab.
-
Keep pushing the top can down to pop the tab of the bottom can. Once you hook the ridge of the top can underneath the tab of the bottom can, push the top can down (or away from your body) to lift the tab up. You’ll hear a popping or cracking noise when you successfully open the soda. [8] X Research source
Advertisement
-
Place the soda can in the freezer for 5-10 minutes. Chill your soda in the refrigerator, then pop it in the freezer for a few minutes before opening it. By reducing the temperature of the soda, less carbon dioxide gas escapes the can when you crack the seal, resulting in less noise. [9] X Research source
- When soda is carbonated, carbon dioxide gas is added to the liquid. The gas becomes more active at higher temperatures, so if you open a soda at room-temperature (or warmer), it produces a louder sound. [10] X Trustworthy Source American Chemical Society Scientific society for those involved with chemistry and publisher of several leading peer-reviewed scientific journals Go to source
-
Cover the opening of the soda with a soft cloth or towel. Spread the cloth across the opening of the soda can, then gently press the edges over the sides of the can for a secure fit. This will act as a buffer to muffle any noise when you open the tab. [11] X Research source
- If you’re in public, stack a few napkins together to cover the opening.
-
Hold the can firmly in one hand and put your thumb over the opening. Make sure that your thumb covers the edges of the opening, where the carbon dioxide gas will be released. This will act as an additional layer of soundproofing to muffle any noise. [12] X Research source
-
Tilt the can away from you and open the tab slowly. Put your index finger under the tab, then use a smooth and controlled motion to open the can. Opening the can too quickly can produce a loud popping noise, which is what you’re trying to avoid. Press your thumb into the opening of the can while you pop the tab to minimize the sound, then enjoy! [13] X Research source
- Tilting the can at this angle may help the carbon dioxide gas release more gradually.
Advertisement
Community Q&A
Search
-
QuestionHow do you open when you have nails on?Ghost Lee MannCommunity AnswerAsk a friend to open it for you, or get a butter knife and do the method explained above.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Reader Videos
Submit a Video Tip!
Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!
Submit a Video
Coming Soon!
Tips
- If the can is missing a tab, try not to squeeze the can tightly when opening it to avoid spills.Thanks
- Wait a few minutes to open the soda can if it has been shaken.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- If you’re trying to open a soda can quietly in public, wait for a moment when everyone is talking or laughing. That way, the sound of the can is muffled by background noises.
- If your can gets shaken up, tap the top of the can with a spoon to stop it from fizzing.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Can piercer (optional)
- Skinny, blunt object (optional)
- Butter knife (optional)
- Additional can of soda (optional)
References
- ↑ https://youtu.be/bQKQ71Ynd94?t=90
- ↑ https://youtu.be/bQKQ71Ynd94?t=119
- ↑ https://lifehacks.stackexchange.com/questions/6506/how-to-open-a-beverage-can-that-has-a-broken-tab
- ↑ https://youtu.be/KwyoZgo28l0?t=212
- ↑ https://www.americanoutdoor.guide/how-to/can-do-8-ways-to-open-cans-without-a-can-opener/
- ↑ https://parade.com/food/soda-can-opening-hack
- ↑ https://parade.com/food/soda-can-opening-hack
- ↑ https://parade.com/food/soda-can-opening-hack
- ↑ https://www.livescience.com/32492-why-does-soda-fizz.html
About This Article
Article Summary
X
To open a soda can, slide the tip of your index finger under the end of the tab at the top of the can. Brace your thumb on the opposite side of the tab and hold onto the can with your other hand. Then, use your index finger to pry up the tab so that it pushes in the seal at the top of the can. Push the tab back down so it’s out of your way. If the tab is broken or missing, use a can opener with a piercing tool to push in the seal. You can also do this with the end of a butter knife or some other blunt object, like a key or a flathead screwdriver. To learn how to open a soda can using the tab, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 275,391 times.
Reader Success Stories
- "I have no idea how to open my soda (this is my first time) and this was so useful."
Advertisement
"I have no idea how to open my soda (this is my first time) and this was so useful."
"Basically I could not open my drink. And you helped, so thanks."
"It helped with homework, thanks."
"Thank you! You're my lifesaver."
"This is very helpful. "
