Download Article
Download Article
Once you know what you are feeling around for in a skeleton key lock, it should not take you very long to pick it. Whether you are into antiques and came across a trunk that you cannot get open or you lost the key to an old door, you should be able to undo that lock with two allen wrenches and a little bit of patience.
Steps
-
Insert a 3 ⁄ 32 inch (0.24 cm) allen wrench into the lock hole. This is the hole where you would insert a key if you had one. If it’s too small for the 3 ⁄ 32 inch (0.24 cm) wrench, go down to the next size, 5 ⁄ 64 inch (0.20 cm). [1] X Research source
- If you don’t have an allen wrench, you could use a sturdy piece of wire bent into a 90-degree angle at one end.
- The reason allen wrenches work so well on skeleton key locks is that they have that 90-degree angle. Using something straight like a bobby pin or nail wouldn’t work because they wouldn’t be able to twist up to engage the lever and deadbolt.
-
Wiggle the wrench around to find the lever. It often helps to insert the wrench and then press it as close as possible to the side of the lock that is facing you. From there, you should be able to push up and feel the lever moving. Move the wrench back and forth and up and down in the lock until you feel resistance that gives way when you push up. [2] X Research source
- A skeleton lock is made of two basic parts: a lever and a deadbolt. The lever sits on top of the deadbolt and moves up and down.
- If you feel the lever moving up and down but don’t experience any resistance, that may mean that the interior spring is broken. If that’s the case, you won’t be able to pick the lock yourself. Try calling a locksmith, instead.
Advertisement -
Engage the lever and switch the wrench to your non-dominant hand. If you lose the lever, just readjust the position of the allen wrench until it’s pushed up once again. It can take quite a few tries before you manage to hold it in place, so don’t get discouraged. [3] X Research source
- Picking a skeleton lock is a two-handed job. Unlocking the deadbolt includes more movement and finagling, which is easier if you use your dominant hand.
Advertisement
-
Insert a second allen wrench behind the first one. Keep the lever pushed up and put the second wrench into the hole, hooking it behind the other one. If it won’t fit into the hole, use a smaller wrench or sturdy piece of wire. [4] X Research source
- An actual skeleton key is shaped so that it will simultaneously push up the lever while opening the deadbolt. Since you don’t have a key, you’re essentially crafting your own makeshift key out of two pieces of metal.
-
Twist the second allen wrench clockwise to unlock the deadbolt. As you turn the second allen wrench, feel for the resistance of the deadbolt. Keep twisting the wrench until the deadbolt slides back and the lock is picked. [5] X Research source
- If you need to lock a skeleton lock, you’ll follow the same process except you’ll turn the second wrench counterclockwise.
-
Remove both wrenches from the lock once it has unlocked. Once that deadbolt has been pushed back, you should be able to turn the handle or knob to open the room, drawer, or antique. Skeleton locks were commonly used in old houses and pieces of furniture, so knowing how to pick them can come in handy if you collect antiques or are moving into a home that no longer has its original skeleton keys. [6] X Research source
- If the door or drawer still won’t open even after you felt the deadbolt move, the spring to the handle itself may be broken or loose. The only way to access that part of the lock is to remove the lock and open up its backplate. You may need to call out a locksmith to help with that process.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If the lock is really old and rusty, it may help to grease the allen wrenches first. You could also spray something like WD-40 inside the lock to help lubricate it.Thanks
- If you can’t open the lock on your own, consult a locksmith or an antique dealer who would have experience with skeleton locks.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- Two 3 ⁄ 32 inch (0.24 cm) allen wrenches
References
About This Article
Thanks to all authors for creating a page that has been read 177,219 times.
Reader Success Stories
- "Managed to unlock an old cabinet we bought a few weeks back. Thank you for the guide! "
Advertisement