Download Article
Download Article
Getting locked out of your room or home can be stressful if you don’t have a spare key on hand. Luckily, you can avoid high fees from a locksmith by learning how to pick a lock yourself. To pick a lock on a door, you’ll need 2 bobby pins and some patience . One pin will serve as the pick and the other bobby pin will serve as a lever that you’ll use to turn the lock.
Unlocking a Door with a Bobby Pin
Bend one bobby pin into a pick, and the other into a tension lever. Stick the shorter, bent end of the tension lever into the bottom of the lock, and push it counterclockwise to apply tension. Next, stick the pick into the lock and feel for the pins. Press down on the handle of the pick to push up the pins.
Steps
-
Open up a bobby pin and bend it at a 90-degree angle. Spread the wavy and straight ends of the bobby pin apart so that it bends at the center and looks like an L. This bobby pin will serve as the pick that you’ll use to unlock the door. [1] X Research source
-
Remove the rubber tip on the straight end of the bobby pin. Use a knife or razor blade to remove the rounded rubber tip on the straight side of the bobby pin. This will be the end that you’ll stick into the lock to pick it. [2] X Research source
- If you don’t have any tools, remove the rubber tip with your fingernail or teeth.
Advertisement -
Stick the flat end of the pin into the top of the lock and bend it. Stick the pin in about 1 centimetre (0.39 in), then fold the rest the bobby pin until it's flush against the face of the doorknob. This will bend the tip at an angle. [3] X Research source
- You’ll use the bent end of the pin to disengage the pins in the lock.
-
Bend the wavy end of the bobby pin into a handle for more control. Take the wavy end of the pick and bend it up at a 30-degree angle to create the handle. This step isn’t necessary but will make picking the lock easier and more comfortable for your hands. Once you’re done creating the handle, the pick is done. [4] X Research source
- The curvy end of the bobby pin will look like a coffee mug handle once you’re done bending it.
-
Bend the tip of another bobby pin to make the tension lever. Take a separate bobby pin and bend the top 1/3 of the pin so that it forms a hook. Do not spread both sides of the bobby pin apart as you did with the pick. Instead, bend both sides of the bobby pin in the same direction. [5] X Research source
- You’ll use the tension lever to actually turn the lock once you’ve picked it.
Advertisement
-
Stick the tension lever into the bottom of the lock. Take the shorter, bent end of the tension lever and stick it into the bottom hole in your door lock. The tension lever will hang down the front of your doorknob. [6] X Research source
- You’ll use the lever to maintain tension on the lock as you pick it and as a way to rotate the doorknob once you've picked the lock.
-
Push the lever counterclockwise to apply tension. Maintaining tension on the lever will rotate the barrel in the lock which will allow you to lift each individual pin. Push the lever until you feel some tension. You do not need to use a lot of force. [7] X Research source
- Keep tension on the lock as you pick it.
- This tension is necessary or the pins will just drop back down into the barrel, keeping the knob locked.
-
Stick the pick into the lock and feel for the pins. Stick the slightly bent end of the pick into the lock so that the tip is facing upwards. The pins sit on the top portion inside of the keyhole. Feel for the pins with your pick by pushing down on the handle of the pick while it’s in the hole. Press down on the handle of the pick to push the pins up. [8] X Research source
- Most traditional doorknobs will have 5 or 6 pins.
- A key pushes the pins up in the exact position they need to line up with the barrel, thus unlocking the door.
-
Push down on your pick until you hear a click. Some of the pins will slide up with ease as you push down on it with your pick, while others will have some resistance. Pins that have resistance are known as seized pins. Concentrate on the pins with a lot of resistance first. Locate a pin that’s hard to push up, and push down slowly on the handle of your pick until you hear a click. [9] X Research source
- The click is the sound of the pin setting on the barrel.
- You need to set the seized pins first before setting the other pins in place.
-
Lift the rest of the pins in the door lock. Continue feeling for the pins with your pick and press down on the handle of the pick to lift up every pin. Once every pin is set on top of the barrel, the door will be unlocked. [10] X Research source
-
Turn the tension lever counterclockwise to open the door. Grab the end of the tension lever and turn it like a key until the door is unlocked. Your door is now unlocked! [11] X Research source
- On most doors, you have to turn the tension lever counterclockwise to open the door but some doorknobs may differ.
- The tension lever will only rotate fully if the pins are correctly set on the barrel of the lock.
- Lock picking uses a rake and a tension wrench. The purpose is to slide along the lock's pins and push them into the cylinder. The pressure should be enough to catch the top pins and hold them in their place so the cylinder will spin once all pins are in place.
- You can make the pick by straightening the 180-bend in the hairpin.
- Then you will have a straight hairpin with little ridges. The little ridges will hit the pins and push them up as you slide the hairpin back and forth.
Advertisement
Community Q&A
Search
-
QuestionHow do you pick a deadbolt with a bobby pin?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA deadbolt lock has pins and tumblers, so you’d use the same method covered in this article. You will need 2 pins, or a second thin, narrow tool that can act as a tension lever.
-
QuestionDoes it work on window locks?VenusCommunity AnswerIf the window lock has a keyhole, then yes, it does work. It only works if there is a keyhole.
-
QuestionThe bobby pin is stuck in the car lock. How do I get it out?Community AnswerTry a jigsaw blade or a small hacksaw blade to pry it out. The small, sharp teeth should grab it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Some locks only open in one direction. Before you begin, try to figure out which way the lock must be turned to open the latch and use the tension tool to hold tension in that direction the whole time. Otherwise, if you have to reverse direction, you will lose tension inside the lock, the pins will all spring back into their original positions and you'll need to start again.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- 2 bobby pins
Expert Interview
Thanks for reading our article! If you’d like to learn more about opening a lock, check out our in-depth interview with Robert Vallelunga .
References
- ↑ https://youtu.be/cjuT_63Ioig?t=53
- ↑ https://youtu.be/cjuT_63Ioig?t=58
- ↑ https://youtu.be/3HcV_2CB7jc?t=10
- ↑ https://youtu.be/cjuT_63Ioig?t=76
- ↑ https://pickeroflocks.com/how-to-pick-a-lock-with-a-bobby-pin/
- ↑ https://youtu.be/d2DxheDJSNQ?t=24
- ↑ https://youtu.be/cjuT_63Ioig?t=106
- ↑ https://youtu.be/iyZnmDcXeso?t=80
- ↑ https://youtu.be/cjuT_63Ioig?t=144
About This Article
Article Summary
X
To open a locked door with a bobby pin, separate the 2 ends so you’re left with a 90 degree angle in the middle of the pin. Then, insert the flat end of the pin into the lock, and bend the tip so the rest of the pin is pressed against the door. You should also twist another bobby pin to form a hook, which you’ll need to turn the lock. Once the hook is ready, hang it from the bottom of the lock. When you’re ready to rotate the lock, push the hook counter-clockwise. As you do this, point the tip of the other pin upwards inside the lock, and push out each pin from the barrel. If you have a pin that’s hard to push out, pull down on the handle of your hook until you hear a click. Once every pin has been removed from the barrel, the door will unlock. Finally, turn your hook counter-clockwise to open the door. For tips on how to make a handle for your pick, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 498,412 times.
Reader Success Stories
- "I lost my key for my safe box where all my important documents are placed, like my passport. This is not the first time I lost my keys, that's why I know how much will it cost me. Thankfully I found this article. It only took me 5 minutes to open the lock." ..." more
Advertisement
"I lost my key for my safe box where all my important documents are placed, like my passport. This is not the first time I lost my keys, that's why I know how much will it cost me. Thankfully I found this article. It only took me 5 minutes to open the lock."
..."
more
"I lose my keys a lot and I don't like spending a lot of money just to get into my house. So this is very helpful. After a ton of practice, I was able to get in my house easily. Thanks!"
..."
more
