Download Article
Download Article
If you have a piece of jewelry or a table made of resin and it’s looking a little dull or scratchy, it may be time for you to give it a polish. Polishing resin is the best way to return your resin to the type of brilliant shine it had when it was first made. Fortunately, polishing resin is a pretty straightforward process that just involves cleaning, sanding, and applying a polishing compound to your resin piece.
Steps
-
Use soap and warm water to clean your resin piece, if necessary. Dip a sponge in warm, soapy water and scrub your resin with it to clean it. Make sure you’ve removed any dirt, grime, or mold from the piece before you begin sanding it. [1] X Research source
- If you’re working with a small piece of resin and it isn’t terribly dirty, you can also simply dip it in the soapy water to clean it.
-
Wet sand the resin with 400 grit sandpaper to remove any scratches. Spray some water on your resin piece or dip it in water to get it wet before smoothing it out with the sandpaper. Sand the entire surface of the resin 2-3 times before moving on to the next step. [2] X Research source
- Wet sanding your resin will give you a much smoother finish than dry sanding and will also minimize the amount of dust created by the sanding process.
- Wear a mask or respirator while you sand so you don’t inhale any airborne particles.
- Be sure to use wet or wet/dry sandpaper instead of ordinary sandpaper. Wet sandpaper is specifically designed to hold up when wet, whereas ordinary sandpaper or dry-only sandpaper won’t work as well when it’s wet.
Advertisement -
Repeat the sanding process with increasingly finer grit sandpaper. After you’ve sanded your resin with the 400 grit sandpaper, sand it again with 600 grit sandpaper, then with 800 grit sandpaper, 1000 grit sandpaper, and finally with 1500 grit sandpaper. This will better ensure that you remove any scratches that the coarser sandpaper couldn’t take care of and end up with a smooth finish. [3] X Research source
- Make sure all of the surfaces and divots are sanded before moving onto the next highest grit.
- If you want to achieve an even smoother finish, you can also sand your resin with 2000 grit sandpaper. However, in most instances, you don’t need to go this far in order to get your resin smooth enough to polish.
-
Dry off your resin piece with a towel to remove any grit or dust. Make sure any aggregate leftover from the sanding process is completely removed before you begin applying the polishing compound. This will also allow you to do a final check for any remaining scratches that still need to be sanded out. [4] X Research source
- You can do a simple visual scan to check for any leftover scratches. If you see any, go back and continue sanding your resin until they’re gone.
- Wet the resin with water to make it easier to see any scratches you missed.
Advertisement
-
Apply the polishing compound across the surface of the resin. Apply the compound liberally so that it can be uniformly spread across the entire surface of the resin. For best results, use a polishing compound that is also labelled as a fine scratch remover. [5] X Research source
- For example, products like Turtle Wax Polishing Compound are also labelled as being effective at removing scratches from resin. You can buy this type of product at most home improvement stores.
- You can also use an automobile polishing compound.
-
Use a microfiber cloth to rub the compound into a small piece of resin. Use firm pressure while moving the cloth in circular motions to polish the resin piece. Pay particular attention to any visible scratches and apply extra pressure to these areas. [6] X Research source
-
Use a buffing wheel or polishing tool to polish a larger piece of resin. Attach the buffing wheel or polishing tool to a power drill or motor, then move the wheel along the surface of the resin while it’s spinning to polish it. Always keep the wheel moving in a circular motion and spin it at around 1200rpm. [7] X Research source
- You can buy a buffing wheel or polishing tool at most home improvement stores and automobile parts stores.
-
Continue polishing the resin until it is shiny and smooth. Keep rubbing the resin piece with your microfiber cloth until the surface has a glossy finish and is as smooth as you want it to be. The resin will get smoother and smoother as you continue to polish it, so stop polishing it whenever the finish is to your liking! [8] X Research source
- If there’s any haze or compound left on your resin piece after you’ve finished polishing it, use a separate, clean microfiber cloth to wipe it off.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Soap
- Water
- Sandpaper
- Towel
- Polishing compound
- Microfiber cloth
References
- ↑ https://www.signaturehardware.com/ideas-how-to-clean-remove-scratches-from-resin.html
- ↑ https://www.youtube.com/watch?v=I-T-xWZlJEY#t=34s
- ↑ https://www.youtube.com/watch?v=I-T-xWZlJEY#t=01m15s
- ↑ https://www.youtube.com/watch?v=6oVtmJhh_Ss#t=02m48s
- ↑ https://www.youtube.com/watch?v=6oVtmJhh_Ss#t=03m15s
- ↑ https://support.formlabs.com/s/article/Polishing-Clear-Resin-for-a-Transparent-Finish?language=en_US
- ↑ https://www.youtube.com/watch?v=I-T-xWZlJEY#t=04m02s
- ↑ https://support.formlabs.com/s/article/Polishing-Clear-Resin-for-a-Transparent-Finish?language=en_US
About This Article
Article Summary
X
To polish resin, all you need is sandpaper and some polishing compound. First, clean your piece with soap and water to make sure there's no debris or dirt on it. Then, wet sand your resin to remove any scratches by either wetting the object or a 400-grit piece of sandpaper and working over the entire surface 2 to 3 times. Repeat the sanding process with increasingly finer grit paper. For example, you might start with a 600-grit sandpaper, then move to an 800, 1000, and finally 1500-grit to get the smoothest finish possible. When you’re done sanding your resin, dry it off with a towel to remove any grit or dust and apply a polishing compound across its surface. Use a microfiber cloth to rub the compound into small pieces, or a buffing wheel or polishing tool for larger items. To learn how to get rid of any haze on your resin piece after you’ve finished polishing it, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 329,738 times.
Reader Success Stories
- "Every time I tried to find something on YouTube identifying how to clean up the resin, I saw a lot of sanding - no one ever showed the last part - the polish. Thank you for the steps - this will make all the difference now that I know there is nothing super special and I can use my car polish for the same result." ..." more
Advertisement
95%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Every time I tried to find something on YouTube identifying how to clean up the resin, I saw a lot of sanding - no one ever showed the last part - the polish. Thank you for the steps - this will make all the difference now that I know there is nothing super special and I can use my car polish for the same result."
..."
more
"I was having problems with my epoxy castings, such as runs and blemishes. I tried everything I could think of to get a clear shine to my model pieces, but they just turned out hazy and looked terrible. However, after seeing this demo, I know what to do."
..."
more
"I knew my piece was dusty, but I was too excited to make sure the surface was completely clean. What a mistake! Thank you for the answer to my question on how to remove lint from the surface on my cured art resin. I look forward to giving it a try."
..."
more
"I'm 76 year old from Ireland, and in retirement. I'm working with epoxy resin as a past-time. I love watching YouTube videos regarding epoxy resin. And also wikiHow has brilliant articles on the practical side of working with epoxy resin."
..."
more
"Well I've not tried this way yet but it sounds better then my way. Which was sandpaper. Mine turned out hazy as well. So this should fix it!"
..."
more
