Download Article
Download Article
Powder coating is a process of coating metal with a plastic finish applied in powder form and baked to a fluid state to bond it to the metal surface. Powder coating has many advantages over traditional liquid coating: It's better for the environment, applies thicker without running, and is easy to style with. Although certain aspects of powder coating can be tricky, it's certainly not difficult, especially for an enterprising soul. Proper cleaning and tools can be the difference between an amateur and a good powder coating job.
Steps
-
Determine the type of material you are going to powdercoat and then select a suitable powder for the finish. Powdercoating is done with thermoplastic or thermoset polymer powder, and these materials are formulated for bonding with different base metals to give the best results.
- See the next section for a detailed discussion of the differences between thermoset and thermoplastic coats. What's good for a car may not be good for a small trinket or decoration.
-
Disassemble all threaded or lubricated interfaces before you begin, including anything you don't want coated. It sounds simple, but many people forget this step. The powder coat you apply will adhere to everything (if properly done) on your rig, making sealed surfaces, bearings, clamps, bolts and nuts, etc. useless after blasting. [1] X Research sourceAdvertisement
-
Clean the base metal thoroughly. [2] X Research source Using bead or abrasive blasting on hard metal, such as cast iron or steel, will remove mill and rust scale, dirt and foreign materials. Chemical solvent cleaning will remove any grease, oil, or paint, and light sanding can be done to finish preparing the surface. Aluminum, magnesium, and other soft alloy metals can be solvent cleaned and wire brushed, or sanded if needed.
- For example, you might sand-blast whatever you want to powder coat until it's down to bare metal. This is the first step in the process. If you don't have access to a sandblaster, you can also use a wire wheel, bench-grinder, or even sandpaper. Just as long as you get the material down to bare metal.
- The next step is to strip the metal of any remaining grime or gunk. You can achieve this by soaking the item in acetone (if the item is small enough) or by wiping it with an acetone-soaked rag.
-
Apply the powder to the object to be powder coated. This is done using a "gun" or compressed air sprayer which electrostatically charges the powder material so that it sticks to the grounded base metal object receiving the coating. These guns are available from various suppliers, and cost as little as $100. For experimental purposes, you can apply the powder to a flat metal surface by dusting it directly on, and spreading it to a thin, even layer.
- Make sure you have your electrostatic charge hooked up to whatever part you are coating. The powder you use won't properly adhere unless it's given a charge to hold onto.
- After applying the coat but before curing, be careful not to brush or blow on the powder coat, as this will cause some of the powder to fall off, leaving you with a less precise coat.
-
Cure the metal at a temperature appropriate for the powder material you use. A conventional oven is suitable for this purpose if the metal is small enough to fit, otherwise, an infrared heat lamp or other flame less heat source needs to be used. Normally, the object is heated to 350° to 375° F (175° to 190° C) for about 10 to 15 minutes, and allowed to cool. [3] X Research source
- You can use a conventional oven to powder coat smaller items. Just be sure that you won't be using the oven to cook food after the powder coating. Once you've used an oven to powder coat, it absolutely should not be used for cooking.
Advertisement
-
Use thermoplastic coatings for items you might eventually remold, and thermoset coatings for items that will remain essentially permanent. The main difference between thermoplastic and thermoset is the reversibility of the coat. Like their name implies, thermoset coatings cannot re-melt after undergoing an irreversible chemical bonding process. Conversely, thermoplastic coatings can remelt because no chemical process takes place.
- Thermostat coatings are ideal for things like electronics and appliances because they need to withstand higher amounts of heat, which might cause thermoplastic coatings to melt.
-
Choose thermotype based on some of the features of the coat. Thermosets and thermoplastics have different chemical properties, making them ideal for different uses. Knowing some of those properties can help you choose which type to coat with:
- Thermosets are said to reinforce the structural integrity of an item, making them particularly suitable for heavy wear-and-tear. They also supply the item with superior chemical and heat resistance, as mentioned above. [4] X Research source
- Thermoplastics offer a mixture of strength and flexibility. They are commonly used for items such as plastic bags and even mechanical parts.
-
Know the advantages and disadvantages of thermosets. Thermosets are often used to coat appliances because of the heat they can withstand. [5] X Research source
- Advantages: beautiful aesthetic look; cheap; added strength and stability; resistant to extreme temperatures.
- Disadvantages: irreversible process means thermoset can't be recycled; more difficult to finish; can't be reshaped. [6] X Research source
-
Know the advantages and disadvantages of thermoplastics. Thermoplastics are used for many items, such as park benches, that require both plasticity and durability. [7] X Research source
- Advantages: high lubricity or tack; [8] X Research source recyclable; able to remolded and/or reshaped; increased impact resistance.
- Disadvantages: more expensive (usually); can melt off if overheated.
Advertisement
Expert Q&A
Search
-
QuestionWhat is the easiest way to remove powder coat?Alvaro Mendoza, Ph.D., is a Metallurgist and the Owner of Mendoza Metallurgy in Portland, Oregon. With over 15 years of professional and research experience, Dr. Mendoza has worked in the aerospace industry in forging, casting, metal-making, and additive manufacturing primarily with nickel-based superalloys, titanium and steels. He currently runs a metallurgical consulting and education business that focuses on providing technical expertise to businesses of any size. He was recently featured on a podcast about why metallurgy matters. Dr. Mendoza received his B.S. and M.S. and Ph.D in Materials Science and Engineering, focus on Metallurgy from the University of Florida.Mechanical means is the easiest way—that means sandblasting, sanding, or some kind of gross removal technique. You can also do some research to see if there's a chemical solution designed to remove that specific coating (like how turpentine works for paint).
-
QuestionCan I powder coat inside car body but not outside?Community AnswerYes, but it will be difficult. You may find it hard to find a shop that has an oven wide enough to accommodate a car. Additionally, the powder will flow around the edges of a surface to the opposite when sprayed, which would result in heavy overspray outside of the car. This could be blown off, but you will be charged extra.
-
QuestionCould you please explain the reason why I should not cook food in the same oven I've used to cure the powder coating?Community AnswerThe fumes from powder coating are toxic. They also get reintroduced every time the oven gets turned on. You will need a designated oven for this. It's also dangerous to do this inside of the kitchen due to the fumes it produces while curing.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Clean and rinse all metal surfaces thoroughly, as with all paint coatings.Thanks
- Use in a well-ventilated, clean area.Thanks
- Powdercoating is an environmentally friendly, corrosion and UV light resistant finish. Although it is best done with precision industrial equipment, it is possible to experiment with it in a home workshop.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not bake in a gas oven.Thanks
- Use a respirator, gloves, and eye protection when abrasive blasting metal to remove scale.Thanks
- Baking the coating in an oven used for food preparation oven is not recommended.Thanks
- Do not touch the object when it is removed from the oven after curing until it is thoroughly cooled.Thanks
- Do not breathe powder when applying it.Thanks
- Do not eat! Possibly fatal.Thanks
Advertisement
Things You'll Need
- Powder for coating.
- Metal part or object to be coated.
- High temp masking tape for masking off parts.
- Heat lamp, oven, or other curing source.
- Safety equipment such as gloves, safety glasses, and respirator.
Expert Interview
Thanks for reading our article! If you’d like to learn more about powdering coat, check out our in-depth interview with Alvaro Mendoza, PhD .
References
- ↑ https://www.powdercoatguide.com/2014/12/prepping-for-powder-coating-step-by-step.html
- ↑ https://www.powdercoatguide.com/2014/12/prepping-for-powder-coating-step-by-step.html
- ↑ https://www.finishing.com/130/23.shtml
- ↑ https://www.thomasnet.com/articles/chemicals/powder-coatings-thermoset/
- ↑ https://www.thomasnet.com/articles/plastics-rubber/thermoset-vs-thermoplastics/
- ↑ https://www.chemistryworld.com/news/new-thermoset-plastics-simple-to-recycle/7372.article
- ↑ https://www.thomasnet.com/articles/plastics-rubber/thermoset-vs-thermoplastics/
- ↑ https://www.pcimag.com/articles/thermoplastic-powder-coatings
About This Article
Article Summary
X
If you want to powder coat something, remove all of its threaded or lubricated surfaces so they don't get locked in place. Then, use abrasive blasting to clean off any rust, dirt, and foreign materials. Once the harder debris is gone, use a chemical solvent to remove grease or oil and then sand the surface if necessary. Next, use a compressed air sprayer to apply the powder coat and cure it at about 350°F for 10 to 15 minutes. For a guide on when to use thermoplastics or thermosets, read more!
Did this summary help you?
Thanks to all authors for creating a page that has been read 766,750 times.
Reader Success Stories
- "I found the whole article interesting. I wasn't aware that it could be done without having to get it done at a professional establishment. Now deliberating whether I need my oven for any more roasts or to sacrifice it in the name of thermoset coatings." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I found the whole article interesting. I wasn't aware that it could be done without having to get it done at a professional establishment. Now deliberating whether I need my oven for any more roasts or to sacrifice it in the name of thermoset coatings."
..."
more
"The entire article was simply laid out, simple to understand and conclusive. I was looking for a 'Synopsis,' if you will, of the basic process with specific details for clarity and your article was perfect! In the future, I will go to wikiHow first!"
..."
more
"This page gave concise, easy to understand instructions on powder coating. I was looking for information on the equipment needed and required temperature to do powder coating, and I found it here. "
..."
more
"I was looking into powder coating to see if I should invest in a gun to coat a deck railing I am making out of steel. I did not know the process involved, thank you for teaching me. "
..."
more
"I was looking for some info on powder coating, and this article answered all of the questions I had. Great job, thank you!"
..."
more
