The Best Ways to Get a Broken Key Out of a Lock

PDF download Download Article
Quickly fish out a snapped key using common household items
PDF download Download Article

If you just broke your key in the lock to your house or car, there’s no need to panic! With a few household items, you can get back on track in no time. Keys can break if the lock isn’t properly lubricated, the key is twisted or damaged, or the lock has iced over or is jammed with dirt and debris. All you need to do to fix it is spray a lubricant inside the keyhole and use tweezers, a pin, pliers, or even a hot glue stick to remove the key. If the key is still stuck inside, it may be best to call a professional. Keep reading to learn more!

Getting a Broken Key Out of a Lock

Spray the keyhole with a lubricant like WD-40 or graphite powder. Grab the broken end of the key with a pair of pliers, tweezers, or scissors, and pull it out. Alternatively, insert a pin, paper clip, or needle into the space between the lock and the side of the key and pry the key out.

1

Tweezers

PDF download Download Article
  1. Spray graphite powder or a lubricant like WD-40 into the keyhole to make it easier to pull the key out. Grab the broken end of the key with the tweezers and pull it straight out. [1]
    • Alternatively, try the same method with a pair of scissors.
    2. Advertisement
2

Pin

PDF download Download Article
  1. Spray the keyhole with lubricant. Insert a pin into a space between the key and the keyhole. Try to get the tip of the pin into a groove or notch in the key and pry the key out of the hole. [2]
    • If you can’t get enough leverage, use a pair of pliers to bend the tip of your pin and use the tip to grab the side of the key. [3]
    • Once the key is partially out of the lock, use a pair of tweezers or pliers to grab the end and pull it all the way out.
    • Alternatively, use a paper clip or a sewing needle. You can also a fish hook. [4]
3

Screw

PDF download Download Article
  1. Apply a lubricant or graphite powder to the inside of the keyhole. Grab a thin screw and place the pointed end in a space between the key and the edge of the keyhole. Screw it in a little bit until the threads catch on the key, then pull the key out. [5]
    • If the broken end is sticking out, use the tip of the screw to pry the key out of the hole.
    2. Advertisement
4

Knife

PDF download Download Article
  1. Spray the keyhole with a lubricant or graphite powder. Slot a kitchen or utility knife between the key and the edge of the keyhole. Slot the other knife in the space on the other side of the key. Gently rotate both knives to pull the broken key out of the keyhole. [6]
    • Make sure to wear work gloves and work slowly so the knives don’t slip.
    • Once the key is poking out of the lock, use a pair of tweezers or pliers to pull it all the way out.
5

Hot Glue Stick

PDF download Download Article
  1. Use a lighter to melt the end of the hot glue stick . Once the tip is melted, press it gently onto the end of the broken key. Wait for 1 to 2 minutes so the glue dries, then slowly pull the stick straight back. The key should come out with it. [7]
    • Alternatively, apply super glue to the end of the key head, clean the edges with a paper towel, then hold the key back together. Let it dry completely, then pull the key out. [8]
    • Try to avoid getting glue inside the lock mechanism. If you do get glue inside, you may need to call a locksmith.
    2. Advertisement
6

Needle Nose Pliers

PDF download Download Article
  1. Spray the keyhole with a lubricant like graphite powder or WD-40. Use needle nose pliers to grab the broken end of the key that’s sticking out. Pull the key straight out. [9]
    • If the key is really far into the lock, Master locksmith Shawn Fago says to use “really thin needle nose pliers, almost like scissors or surgical tools, to grab onto the key and pull it out.”
7

Saw Blade

PDF download Download Article
  1. Spray the keyhole with a lubricant. Use a pair of pliers to break off one end of the jigsaw blade . Slide the broken side of the blade into the space between the lock and the key, twist it slightly, and pull the key and the blade out. [10]
    • Jigsaw blades are made of a brittle metal, which makes them easy to break with a pair of pliers.
    • Cover one end of the blade with duct tape so you have a safe handle to grab onto.
    • Alternatively, try using a barbeque skewer or a bicycle spoke.
    • If the key comes partially out, just grip the end with needle-nose pliers and finish removing the key the rest of the way.
    2. Advertisement
8

Drill

PDF download Download Article
  1. This method works best if the key is visible. Insert a drill with bit that’s about the width of the key in the exposed side of the key. Drill a small hole into the key. Insert the bit, a paperclip, or another small long object into the hole and pry the key out. [11]
    • Make sure not to drill into the lock.
9

Magnet

PDF download Download Article
  1. Most modern keys are made of brass, aluminum, or nickel silver. [12] If your key is made of aluminum, you can use a very strong magnet to pull it out. Just spray the keyhole with a lubricant like WD-40, place the magnet onto the end of the broken key, and pull it straight out.
    • Brass isn’t magnetic. [13] Nickel is magnetic, but silver isn’t. [14] Depending on the composition of your key, a magnet might not attract to it.
    • If your key doesn’t pull out with a magnet, try a different method to remove it.
    2. Advertisement
10

Extractor Tool

PDF download Download Article
  1. Slide a key extractor tool into the lock, turn it, and pull the key out. Spray a silicone lubricant or graphite powder into the keyhole. Master locksmith Shawn Fago says to insert the small hook tool (with the hook facing upward) as far as possible into the lock along one of the grooves on the side of the key. Then, “pull straight out and the key should come out.”
    • If the hook tool doesn’t work, try the spiral style tool. Instead of twisting the tool toward the key, spin the tool’s handle several times before pulling it straight out.
    • If the keyhole is in between the locked and unlocked positions, use needle nose pliers to reach inside the hole and turn it into either position.
11

Dismantling the Lock

PDF download Download Article
  1. If you need to open a door immediately and the other methods don’t work, unscrew the handle . [15] Insert a screwdriver into the center hole in the latch assembly. Push towards the door latch, wiggling back and forth until the door pops open. [16]
    • If your door handle doesn’t have any visible screws, you may have to twist the plate underneath it to expose the screws. [17]
    • If the key is stuck in your car , motorcycle, or a padlock and won’t come out with the other methods, it might be best to call a professional to help instead.
    2. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do you remove the core on a lockset? A key snapped off, and I can't get it out through all the conventional methods.
    Glenn Letteer
    Community Answer
    This question can't be answered without knowing exactly which type of lock the key is broken off in.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 48
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you’ve tried all the methods above and the key still won’t budge, it’s best to call a professional to have them fix it for you. [18]
        Thanks
        Helpful 3 Not Helpful 3
      • If you have an old-fashioned key with a long barrel and a flag at one end, you will need to have a professional dismantle the lock. [19]
        Thanks
        Helpful 3 Not Helpful 6
      • Use a flashlight and a magnifying glass to see into the keyhole more easily. [20]
        Thanks
        Helpful 3 Not Helpful 3
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Remove Locking Lug Nuts
      How to
      Remove a Broken Key from a Car Lock
      Key Broke off in the Ignition? Here’s How to Get It Out
      How to
      Reset a Luggage Lock
      How to
      Unlock a Door
      How to
      Open a Door with a Credit Card
      How to
      Reprogram a Sentry Safe with or without the Factory Code
      How to
      Open Combination Locks Without a Code
      How to
      Unlock a Safe: Combination Locks, Digital Locks & More
      How to
      Break a Lock
      A Detailed Guide to Programming Car Keys & Fobs
      How to
      Pick Locks On Doorknobs: Knob Types & Lockpicking Tutorials
      Don’t Panic! What to Do When You’ve Locked Your Keys inside Your Car
      How to
      Open a Locked Bathroom Door (Twist & Push Locks)
      Advertisement

      References

      1. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/
      2. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/
      3. ↑ https://www.apartmenttherapy.com/how-to-get-broken-key-from-lock-36762274
      4. ↑ https://www.apartmenttherapy.com/how-to-get-broken-key-from-lock-36762274
      5. ↑ https://youtu.be/gzw_2GttP6M?t=102
      6. ↑ https://youtu.be/lkSCydF7byg?t=210
      7. ↑ https://youtu.be/10MaI9lSBLE?t=213
      8. ↑ https://youtu.be/n6bPq_gsGok?t=14
      9. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/
      1. ↑ https://youtu.be/63tQH1DIqIw?t=155
      2. ↑ https://www.art-of-lockpicking.com/broken-key-in-lock/
      3. ↑ https://www.greenmatters.com/p/how-to-recycle-keys
      4. ↑ https://terpconnect.umd.edu/~wbreslyn/magnets/is-brass-magnetic.html
      5. ↑ https://terpconnect.umd.edu/~wbreslyn/magnets/is-silver-magnetic.html
      6. ↑ https://youtu.be/a-PUpil2fxs?t=35
      7. ↑ https://youtu.be/eqGFm6a-pnQ?t=47
      8. ↑ https://youtu.be/BmibPyaM_MY?t=49
      9. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/
      10. ↑ https://www.apartmenttherapy.com/how-to-get-broken-key-from-lock-36762274
      11. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/
      12. ↑ https://www.bobvila.com/articles/key-stuck-in-lock/

      About This Article

      Article Summary X

      To remove a broken key, start by spraying a silicon spray into the lock, which will lubricate it and make it easier for the broken key to slide out. Then, use a pair of needle nosed pliers to twist the cylinder so the lock is either locked or unlocked, since the key part won’t come out if it’s halfway between the 2 positions. Next, select an extractor tool from your set, which you can buy at a hardware store, and slide it into the lock with the hook facing upwards. Try to locate the groove on the side of the broken key, then twist your tool towards the key. Gradually pull the tool out, which will hopefully cause one of the hooks to catch on the broken key’s teeth and pull it out. Remember that you may have to try several extraction tools, since they are all made differently and will perform better depending on the type of lock you have. For tips on how to make your own extracting tool, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 285,128 times.

      Reader Success Stories

      • Dave Duncan

        Jul 3, 2018

        "Thank you for your article, I couldn't have done it without you."
        Rated this article:
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement