Download Article
Download Article
There may come a time in your car’s life when you will need to replace a door. Maybe the door is rusting over, or maybe it’s dented beyond repair. You may also find that removing a door will give you a much more usable opening for larger objects, so knowing how to remove and reattach your door will come in handy even if it isn’t damaged. Whatever your reason may be, removing and replacing a car door is not a very difficult process, and doesn’t require a huge, expensive mechanics tool set.
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
Steps
Download Article
-
Make sure you have the correct door: If you are replacing your door (instead of simply removing it for better access) make sure the door that you’ve procured is correct by physically checking it against the door you are replacing.
-
Find the appropriate size wrenches for your car door: Check the bolts on the doors hinges and door holder (see step 4) to find the correct size.Advertisement
-
Door wiring: Most new vehicles have a lot of wiring in their doors. That wiring is connected to the control computers in the car. In order to prevent the wiring from getting damaged or corroded, manufacturers enshroud the wiring that travels from the car body to the door in a rubber tube. [1] X Research source
- Pull the rubber tube out of it’s recess in the door or car body, and push it back until you reveal an electrical connector (try not to tear the rubber).
- Pull the connector apart: Depress the tab and separate the door connector half from the car body connector half.
- Some connectors are more complicated. If your connector appears to have two tabs on it, try pulling the centermost tab out of the connector (it may not come all the way out) and then push in the other tab and pull them apart. Be careful, especially if your car is older.
-
Door holder: The door holder is a small plastic stick that slides in and out of the door as the door opens and closes. The door holder is only intended to keep the door from opening and closing by itself and is very weak. You do not want the weight of the door on the door holder. [2] X Research source
- Unbolt the door holder from the body of the car.
- Note: In some vehicles the door holder is an integrated piece on one or both of the door hinges. If you find this is the case, skip to the next step.
-
Unbolt the hinges. [3] X Research source
- Have a friend hold the door to prevent it from falling while you are trying to work on it
- Unbolt the hinges from the door.
-
Remove the door. [4] X Research source
- With the bolts removed, the door should basically fall away from the car body.
- Stand the car door upright against a wall, the window can break easily, so try not to stress it more than necessary.
-
Check the new door for hinges. If they are still attached, remove them. Don’t throw them away, they may be useful if something ever happens to the hinges still on the car.
-
Line up the new door
- Have your helper hold the door up in an approximation of where the old door was when open.
- While your helper holds the door, guide the door up to the hinges and line the bolt holes on the hinges up to the bolt holes on the door.
-
Bolt on the new door to the hinges. [5] X Research source
- Place the hinge bolts into their bolt holes and spin the bolts in with your fingers.
- Once you’ve tightened the bolts a few turns with your fingers, tighten them the rest of the way down with the wrench.
- Do not use the wrench to position the bolts, they can cross-thread and do damage to the new door if positioned incorrectly.
-
Bolt the door holder in place.
-
Reconnect the door wiring.
- Plug the new door connector into the car body connector (if your door connector involved more than one tab, make sure to push both tabs into position).
-
Push the rubber wiring tube into it’s recess in the new car door.
-
Test the new door electronics. [6] X Research source
- Turn the car on and actuate all of the switches on the door to make sure they are all working.
- Roll the window all the way up and all the way down. Make sure the new window has the entire range of motion that the original window had.
-
Check the fit of the door to the car.
- Close the door, if it looks like it fits, skip ahead one step.
-
Adjust door fit: Hinge bolts are the only way to adjust the door fit without serious body work.
- Loosen the door hinge bolts slightly, just enough to shift the door, try to move the door in the hinge bolt holes. (Not every car will be able to move the door within the bolt holes. If this is the case, bodywork may be needed to get a perfect fit).
-
Apply a thread locking fluid: Thread locking fluid will prevent the door hinge bolts from loosening due to vibrations in the car. [7] X Research source
- Unbolt each bolt one at a time (do not remove all of the bolts at once).
- Paint a thin film of thread locker onto the bolt thread.
- Re-position the bolt and tighten it down.
- Repeat this process with each bolt that you had to remove during the door replacement.
- You should be able to start driving the car right away once the tightening process is finished.
Advertisement
Expert Q&A
Search
-
QuestionCan you replace your car door panel?Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.Sure! Nowadays, there are many varieties of door panel clips and many clip removal tool kits available at reasonable prices. Do not use a straight edge screwdriver to remove a door panel as significant scarring to the panel and the door often results. Be patient and use as little force as possible when prying on a clip. This will reduce damage to the clip, your pry tool, and the vehicle, reducing rework and headaches.
-
QuestionIf I have frame damage is it still possible to align a new door?Community AnswerIt depends on the amount and location of damage. If the damage did not affect the geometry of the door opening, it is possible.
-
QuestionWhat tool do you need to remove the studs?Community AnswerIf by "studs" you mean the plastic pins holding together the car trim and fastening it to the metal parts of the car, there are very inexpensive plastic kits for trim removal. The tools look like plastic spatulas and small flat bars, some with notches. Check Harborfreight, Amazon and eBay.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If your new door is a different color, you can try painting it. [8] X Research source If you’re not comfortable with painting, a body shop can take care of the painting for you.Thanks
- Any time you are doing work on a vehicle, remember to put all of the parts that you remove into a box (or any type of storage device) so you don’t lose parts. If the work you doing is complicated, use several storage devices and label them. Sure, it takes more time, but the bolt that gets lost is the one you need the most.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Wrenches (a socket set will work best)
- A friend
- Replacement door (if you're replacing the door)
- Thread locking fluid
- A box (for your bolts)
References
- ↑ https://www.howacarworks.com/bodywork/replacing-a-car-door
- ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
- ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
- ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
- ↑ https://www.popularmechanics.com/cars/how-to/a5508/4350218/
- ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
- ↑ https://www.popularmechanics.com/cars/how-to/a1172/4208687/
- ↑ https://www.youtube.com/watch?v=S4uUr9XlKRo
About This Article
Thanks to all authors for creating a page that has been read 214,442 times.
Reader Success Stories
- "The part about door wiring was most helpful. Although the information was helpfull in general, as I'm fixing up an older van and am a real novice." ..." more
Advertisement
83%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"The part about door wiring was most helpful. Although the information was helpfull in general, as I'm fixing up an older van and am a real novice."
..."
more
"Gave me a little confidence that I could do the job, just bought a beautiful car with blown engine, going to use it to replace my doors."
..."
more
"With your info, it was a piece of cake. Thanks because I have saved some money. Thanks again."
