Download Article
Download Article
Roll up blinds are an attractive way to cover your windows, but they can be tricky to roll up evenly. Fortunately, most roll up blinds are very simple to use. Before you roll up your blinds, check to see if they use a cord pull, are spring-loaded, or are rolled up by hand. Then, you can adjust your blinds to your desired height.
Steps
-
Pick up the bottom of your blinds and roll them halfway up by hand. Start rolling by folding up the bottom end of the blinds. Then, continue rolling them layer by layer, applying even tension across the width of the blinds. Stop once you reach the halfway point or when you think you have a good enough start. [1] X Research source
- Although you can skip this step if your blinds are short, rolling them partially up by hand will help the blinds roll up evenly.
-
Hold the blinds with one hand as you grab the cord. The cord is usually located on the right side of the blinds near the top. At this point, it’s important that you don’t let the blinds go, as they aren’t secure. If you don’t hold onto them, they’ll unroll again. [2] X Research source
- Your blinds may have a fabric or plastic cord that’s used to open and close them. Both types work in the same manner.
Advertisement -
Lift the bottom loops that cradle the blinds by pulling on the cord. If you partially rolled your blinds by hand, you’ll need to lift the cords that hold the blinds in place, which will still be down where your blinds started. Don’t let go of the rolled blinds until these cords reach the bottom of the roll. Once they do, you can take your hand off of the roll and let the cords pick up from there. [3] X Research source
- Some cords consist of 2 pieces, with one controlling each side. If yours is made like this, make sure the cords on both sides are equally tight before you move on. If they aren’t, pull the cord that controls the loose side until it’s just as tight as the tight side.
-
Continue pulling the cord until your blinds reach your desired height. Apply a light to medium tension as you pull the string so that the blinds don’t come up too fast. This will help keep them neat and even as they roll up. [4] X Research source
Tip: If your string has a trigger that automatically rolls up the blinds after you tug down on it, then you don’t have to keep pulling the cord. Instead, slowly release the cord to allow the blinds to roll up.
-
Hold your string straight down and let go if your cord locks in place. Some blinds have an internal mechanism that holds the cord in one spot until you pull on it again. If your blinds have this feature, the cord will stay put automatically when you let go of it, so you don't need to tie off the cord.
- This is a built-in feature that some blinds have. It works the same way as the cord on mini blinds.
-
Tie off the cord on a hook, if you have one. Some blinds need to be tied on a hook to keep them from unrolling. If your blinds are like this, make several loops around the hook to keep it secure. If you can, tie the cord in a figure 8 pattern for added security. [5] X Research source
- This hook is sometimes called a "cleat."
Advertisement
-
Grasp the bottom of the blinds at the center. You’ll be able to trigger the spring in the blinds more easily if you’re holding it at the center. If you hold it too much to the left or right, the blinds may only roll up on one side. [6] X Research source
- Your blinds may get damaged if they roll up on one side but not the other.
-
Pull the end of the blinds down and slightly forward. Tug the blinds gently to trigger the spring. At this point, your blinds should be coming away from your window at a slight angle. [7] X Research source
- You may need to tug it down several times before you trigger the spring.
Tip: Don’t let the blinds go while they’re rolling up. Otherwise, the blinds can get damaged.
-
Guide the blinds as they roll back up. They will roll back up on their own, but it’s best to hold the end of the blinds as this happens. This way you can make sure the blinds don’t roll up too quickly, which can result in damage or uneven blinds. [8] X Research source
-
Let go of the blinds once the end reaches the top or your desired height. If you want them to roll all the way up, you can just let go. However, if you want to stop the blinds partway up, let them roll up to just above where you want them. Then, lower the blinds back toward the window. Finally, tug the blinds down until they're in the right spot and let them go. [9] X Research source
Advertisement
-
Grab the bottom of the blinds with both hands. It’s best to position your hands at about shoulder-width apart. This will allow you to create a more even roll. However, hold your blinds in whatever way is most comfortable to you. [10] X Research source
-
Roll up the blinds to the height you prefer. Fold up the bottom edge, then slowly roll up the curtains until you reach your desired height. Go slowly so you can make sure each layer is even with the last. [11] X Research source
- It’s up to you how tightly you want to roll up your blinds. You might like the look of tightly rolled blinds, or you might prefer loosely rolled blinds. Either way works.
-
Tie off the ribbon or cord on each side of the blinds. Make a neat bow on both sides to hold up the blinds. You may need to loosen and re-tie the bows several times to get them how you want them. [12] X Research source
Tip: If possible, ask someone to help you tie off your blinds. Your blinds will look much neater if one person ties while the other holds the blinds in place.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Blinds can save you money on your energy costs. During winter time, it’s best to leave your blinds up on sunny days, as it warms your home. On the other hand, leaving your blinds down on sunny summer days will keep your home cooler, saving you money. [13] X Trustworthy Source U.S. Department of Energy Official site for the U.S. Department of Energy, which provides resources related to energy safety, conservation, and efficiency Go to sourceThanks
- Read the instructions that came with your blinds. Depending on the type of blinds you own, there may be special instructions.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.youtube.com/watch?v=KawkNjoISeQ&feature=youtu.be&t=95
- ↑ https://www.youtube.com/watch?v=KawkNjoISeQ&feature=youtu.be&t=131
- ↑ https://www.youtube.com/watch?v=aZv4f3--sbo&feature=youtu.be&t=203
- ↑ https://www.youtube.com/watch?v=KawkNjoISeQ&feature=youtu.be&t=151
- ↑ https://www.youtube.com/watch?v=KawkNjoISeQ&feature=youtu.be&t=170
- ↑ https://youtu.be/h8YIASka2qs?t=31
- ↑ https://youtu.be/h8YIASka2qs?t=31
- ↑ https://youtu.be/h8YIASka2qs?t=31
- ↑ https://youtu.be/h8YIASka2qs?t=31
- ↑ https://mydearirene.com/2016/07/25/no-sew-double-sided-roll-up-diy-window-shade/
- ↑ https://mydearirene.com/2016/07/25/no-sew-double-sided-roll-up-diy-window-shade/
- ↑ https://mydearirene.com/2016/07/25/no-sew-double-sided-roll-up-diy-window-shade/
- ↑ https://www.energy.gov/energysaver/energy-efficient-window-attachments
About This Article
Thanks to all authors for creating a page that has been read 123,969 times.
Advertisement
