Download Article
Download Article
Painting a Nerf gun can give the toy a fresh new look and make it worthy of your friends' jealousy. Or, you may want to paint it in order to use the toy as a prop weapon in a video or film. Spray painting is the quickest and easiest way to give your Nerf gun a new color pattern, but you do need to take some basic precautions and use the right products and techniques.
Steps
-
Purchase the right kind of paint. Not all types of paint will look as good or last as long on your Nerf gun. One brand that historically works great is Krylon Fusion (for plastic), as the paint bonds to the plastic on the Nerf gun and makes the paint job last longer.
- Some enthusiasts prefer other spray paint brands, or vinyl dye sprays, which are available at auto parts stores.
-
Select a good work area. Sanding and spray painting a Nerf gun — or anything else, for that matter — is not they type of project that you should try to tackle on your dining room table. Plan ahead both for safety and to contain the mess you’ll make. Work in a well-ventilated area, but in low-wind conditions. Put down an ample amount of paper, cardboard, or other protective material on your workspace. Follow the preparation and application instructions on the spray paint can. [1] X Research source
- If you're painting outside, be sure to work in a shaded area. If you paint in direct sunlight, the paint might flash dry instead of drying properly.
Advertisement -
Clean the plastic surface. Spray paint adheres better and lasts longer on a clean surface. Some mild soap and a thorough rinse (and dry) will do the trick. [2] X Research source However, the best way to prepare plastic for painting will depend on whether it's old or new: an ammonia-based cleaner (such as a window spray) will better prepare worn plastics for painting, while paint thinner works best for brand new plastic items. [3] X Research source
-
Disassemble the toy. Take apart your Nerf gun using a screwdriver. You only need to take off the panels that you feel need painting. Be cautious, because many Nerf guns have pieces under tension, and often springs, and these can escape at high speed once you open the gun. [4] X Research source
- Take a photo of the internal layout of the gun before removing any pieces, so you'll have a guide for reassembly later.
- You can spray paint without disassembling if desired, but it’s easier to get complete coverage if you take the toy apart.
-
Sand the panels. A good sanding job will allow the paint job to last longer, so take your time on this step. Sanding will create more surface area for the paint to bond to. Sand each panel until it feels slightly rough. Use any general purpose sandpaper for the job. [5] X Research source
- Wipe away dust and debris with a tack cloth before proceeding. Or, wash the toy again with a mild soap and water, and rinse and dry it thoroughly.
- Whether or not you sand, be sure to wash every piece you intend to paint in order to remove mold-release chemicals that can interfere with paint adhesion.
Advertisement
-
Tape any panels or parts that you want to remain partially unpainted. It would be a good idea to cover the orange tip, so it will be clear it is a toy. Apply painter's tape (masking and duct tape will work too, but they usually leave a sticky residue) so that the spray paint doesn't cover these sections. For masking fine details, you can trim out shapes from the tape with a sharp hobby knife.
- You can also tape over the black base coat you’ll apply next, after it has dried thoroughly, if you want certain sections to remain black. If you find that your finish paint color is leaking under your painter's tape, applying another layer of your base coat over the tape before applying your accent color can help.
- Look online for examples of high-quality Nerf gun paint jobs. You may be inspired!
-
Apply the base coats of paint. Apply two or more light coats of black spray paint. This process is called "priming." Priming makes the other finishing colors stick out more than they would if applied just by themselves. This is especially helpful if your Nerf gun has bold contrasting colors, like blue and orange or red and yellow. [6] X Research source
- Start and end your spray pointed away from your target to avoid splatters.
-
Let the black paint dry. Wait at least ten minutes. It's important that the first layer of paint is dry so that new colors don't blend with the black. It's best not to let the paint dry in direct sunlight. [7] X Research source
- Refer to the information on your paint's can for re-coat times.
-
Add your finishing color(s). Take the color(s) of spray paint you want and spray several light coats over the black base coat (and any taped areas). Let the paint dry for ten minutes or more between coats. Remove any painter’s tape after applying the final coat, either before or after the paint has fully dried.
- If you mix types/brands of paint, test their compatibility on some scrap plastic or a part of the gun that won't show once assembled.
Advertisement
-
Add touch-up detailing if desired. If you want to add any fine details or touch up some hard-to-reach spots, use acrylic paints and fine-tipped acrylic brushes. Allow the paint to dry thoroughly between coats. [8] X Research source
- Be extra cautious painting parts that see a lot of movement, like triggers and slides. Some of them move in places with very little room to maneuver, and even the increased thickness added by coats of paint can affect performance.
-
Apply a clear coat spray. This will give your new paint job a longer life, especially on areas prone to wear like handles and triggers. The application process will be very similar to applying the spray paint, but follow the instructions on the can. [9] X Research source
- Let the clear coat dry thoroughly before reassembling the toy.
-
Reassemble your Nerf gun. After all the painted parts are completely dry, screw them back together and admire your work. Your Nerf gun paint job is now complete!
- Refer to the photos you should have taken during disassembly if you need a refresher.
Advertisement
References
- ↑ https://www.bobvila.com/articles/how-to-paint-plastic/
- ↑ https://www.bobvila.com/articles/how-to-paint-plastic/
- ↑ http://www.krylon.com/how-to/how-to-videos/how-to-spray-paint-plastic-video/
- ↑ https://www.youtube.com/watch?v=3jZP8jQtDKc
- ↑ http://www.krylon.com/how-to/how-to-videos/how-to-spray-paint-plastic-video/
- ↑ https://www.youtube.com/watch?v=As7rdGFYWgw
- ↑ https://www.youtube.com/watch?v=As7rdGFYWgw
- ↑ https://www.youtube.com/watch?v=3jZP8jQtDKc
- ↑ https://www.youtube.com/watch?v=3jZP8jQtDKc
Community Q&A
Search
-
QuestionWhat if my primer is clear? Does it matter?Community AnswerA black base coat works best, because it gives you a consistent base of color to cover with your finish paints.
-
QuestionDo you have to sand?Community AnswerIt is worth the effort to sand, because the paint will adhere better and last longer.
-
QuestionDo you need to apply a layer of base coat?Community AnswerApplying the base coat makes it much easier to get a consistent final color, and will likely actually save you time in the long run.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- An easy way to hang any painted piece with a trigger guard: slip it over a broom handle or dowel rod. This is especially handy when painting many guns at once.Thanks
- Be patient and apply many light coats of paint rather than a few heavy ones. Heavy coats can result in drips.Thanks
- For painting only a small part of a gun, you can sometimes use a plastic grocery bag as your mask, only taping the edges of it around your target area.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Be sure to keep the tip orange and try not to paint it realistic colors (black, metallic grey, etc) so it won't be mistaken for a real firearm.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- First timers should not attempt to paint the inner workings of their Nerf guns.Thanks
- In some places painting the barrel of a toy gun and making it look like a real gun is illegal, so check if it is ok where you live.Thanks
- Don't attempt to use spray paint in very hot, very humid, or cold conditions. Your results will suffer.Thanks
- Krylon Fusion and vinyl dyes work as intended only on bare plastic. If the plastic has ever been painted, the 'dye' effect will not work and it will perform at best only as well as conventional spray paint.Thanks
Advertisement
Things You'll Need
- Spray paints (colors of your choice)
- Sandpaper
- Screwdriver
- Painter’s tape
- Small acrylic paintbrush (optional)
- Acrylic paint (optional)
About This Article
Article Summary
X
To spray paint a Nerf gun, clean the plastic with soap and water, then carefully disassemble the toy with a screwdriver. Place the pieces of plastic on a workbench lined with newspaper or cardboard, then sand the panels until each one feels slightly rough, then wipe away any dust with a tack cloth. Wrap tape around any parts of the toy you don’t want to paint, then apply 2 or more light coats of black paint to prime it. Let the primer dry for at least 10 minutes, then spray on several light coats of your final color, letting the paint dry for at least 10 minutes between coats. For tips on coating your Nerf gun with clear coat, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 128,157 times.
Reader Success Stories
- "I painted my Nerf Fortnite BASR-L to the proper colour it has in the game and it came out great! Looks exactly like it does in the game and makes the gun stand out amongst others. Certainly worth a try for any Nerf gun enthusiasts!" ..." more
Advertisement
89%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I painted my Nerf Fortnite BASR-L to the proper colour it has in the game and it came out great! Looks exactly like it does in the game and makes the gun stand out amongst others. Certainly worth a try for any Nerf gun enthusiasts!"
..."
more
"This page helped me a lot because I was going to paint my Stryfe but I didn't know how to. Now that I know I'll have a very cool looking gun!"
..."
more
"I really wanted to paint my Stryfe and this guide has really helped me. Thanks to whoever made this forum."
"The tips are outstanding, and I look forward in following these for future collections!"
"I'm modding a Nerf pistol and it has gone great."
