Download Article
Download Article
If you have braces, you'll probably have a wire come loose at some point. Braces wires most commonly come loose soon after the braces are placed. Whatever the cause, a loose wire is rarely something to panic about. In most cases, you can fix the wire at home which will keep your braces comfortable until you're able to see your orthodontist.
Steps
-
Feel where the wire has come loose. Wires can come loose over time, or due to chewy food. According to Dentist Shayne Guffey, "It is important to take action when a wire becomes loose or broken to avoid any damage or infection to your mouth." Make sure the bracket itself is still attached to your tooth. Also, make sure that the wire has not come completely out of the bracket. [1] X Research source
- If the wire has come out of the bracket, attempt to slide it back into place. You may need someone else to help you with this.
- If the bracket has come off of your tooth as well, call your orthodontist to have it put back on.
-
Find a small, dull object to push it back into place. Dentist Shayne Guffey suggests that, "it may be possible to just gently bend the wire end away from the lip or cheek." Many things can be used for this purpose. You can use a pencil eraser, the back of a spoon, or a cotton swab. If you don't have any of these on hand, look for another small, dull object to do the job. [2] X Research source
- Make sure whatever object you use is clean. You never want to put something dirty into your mouth.
- Cotton swabs are clean right out of the package.
- You can wash your spoon with dish soap as you normally would.
Advertisement -
Use the object to push the wire into place. Gently slide the object into your mouth. You may need to look in a mirror to see what you're doing. Press the wire back into place so that it sits close to your teeth once more. [3] X Research source
- If you can't see what you're doing in the mirror, you can ask a friend or family member for help.
- Be gentle as you push — the wire can slip out and pierce your cheek or gums. You don't want to hurt yourself or knock another wire out of place.
-
Make sure the wire no longer rubs against your cheek. With your tongue, feel the area where the wire came loose. It should feel similarly to how it did before coming loose. If you have any discomfort or if the wire is scraping your cheek, you should try another method or book an appointment with your orthodontist. [4] X Research source
Advertisement
-
Create a small ball of dental wax . Dental or “relief” wax should be available from your orthodontist, or at your local drug store. Roll the wax into a ball that is about the size of a popcorn kernel or a pea. The wax should be easy to mold with your hands. [5] X Research source
- If you can't find dental wax at the store, and your orthodontist is unavailable, you can order it online.
-
2Dry your brace and the wire. Use a paper towel to dry the brace and the wire. The wax will not stick well if the wire is very wet. Try to keep your mouth dry while you apply the wax by breathing through your mouth and not swallowing.
Advertisement
</ref>
-
Push the wax ball onto the wire. Once the wax is on the wire, smooth it down over the end of the wire all the way to the bracket. This should make the end of the wire soft enough that it no longer irritates your cheeks or gums.
- The wax may fall out at some point. You can replace the wax as often as necessary until your orthodontist can fix the wire permanently.
- Dental wax isn't toxic or dangerous, so don't worry if you accidentally swallow it.
-
Find a pair of small wire cutters. Braces wires can be very easy to cut. You won't need anything very large. Dentist Shayne Guffey notes that, you can also "use a pair of nail clippers or pliers to cut off sharp ends; this will keep the wire away from the cheek and gum and stop irritation to the inside of your mouth." Choose a pair of pliers or small wire cutters that can fit comfortably inside your mouth. [6] X Research source
- Distal end wire cutters are best, since they will grip the cut piece of wire. This helps avoid the possibility of you swallowing part of the wire.
-
Sterilize the wire cutters with alcohol. Anything you put in your mouth should always be clean. Wipe the wire cutters down with rubbing alcohol before putting them into your mouth. You should also sterilize nail clippers if using those. [7] X Research source
- Let the alcohol dry or evaporate before inserting the wire cutters into your mouth.
- Use the wire cutters soon after cleaning them. If they lie around for a long time, they may be exposed to bacteria.
-
Place your finger on the wire you plan to cut. This helps prevent the clipped part of the wire from flying into the back of your throat. You want to avoid swallowing the wire at all costs. Swallowing the wire can be painful and sometimes dangerous. [8] X Research source
-
Ask for help if you don't feel comfortable. It may be difficult to see and cut the wire by yourself. If there's any chance you won't be able to do the job neatly and without hurting yourself, ask a friend or family member for help. [9] X Research source
- Avoid shaking the wire too hard or pushing with pressure on the back teeth while trying to cut the wire, as you can detach any of the brackets.
- You can try looking in the mirror under a bright light. Not all wires will be visible or easily accessible to you.
Advertisement
Expert Q&A
Search
-
QuestionHow can I take care of my lips when wearing braces?Dr. Macau is a Doctor of Dental Surgery based in London, England. Dr. Macau is an oral surgeon, periodontist, and aesthetician at Favero Dental Clinic where he is known for his cosmetic dentistry and facial aesthetics work. He is actively involved in scientific research in the field of dentistry and he received his DDS from Carol Davila University of Medicine in 2015.When wearing braces lips may get dry or even small cuts may occur on the inner surface in the first weeks made by the front brackets. If any of these situations happen, try to moisture your lips with a lip balm or cream. In order to avoid any scratches or cuts of the inside of your lips, apply a thin layer of dental wax on the front brackets (upper and lower) or even use protective strips.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Always call your orthodontist to let them know what has happened. They may want you to make an appointment to make sure your braces are okay.Thanks
- You can ask a friend or family member for help if you are having a hard time fixing the wire by yourself.Thanks
- Often, wires come loose due to chewy and sticky foods. Avoid foods that are likely to dislodge any part of your braces.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful to prevent swallowing any part of your braces when trying to fix the wire.Thanks
- Make sure anything you put in your mouth is clean, and even sterilized if necessary.Thanks
- Cutting the wire should always be a last resort.Thanks
Advertisement
Things You'll Need
- A dull object such as a pencil eraser or spoon
- Dental or "relief" wax
- Paper towel
- Wire cutters
- Rubbing alcohol
- A mirror
References
- ↑ http://askanorthodontist.com/braces/my-wire-came-loose-and-is-poking-what-do-i-do/
- ↑ http://www.dentalassociates.com/braces-orthodontics/orthodontic-emergency-care/
- ↑ http://www.dentalassociates.com/braces-orthodontics/orthodontic-emergency-care/
- ↑ http://www.dentalassociates.com/braces-orthodontics/orthodontic-emergency-care/
- ↑ https://www.colgate.com/en-us/oral-health/early-orthodontics/how-to-use-wax-for-braces
- ↑ http://askanorthodontist.com/braces/my-wire-came-loose-and-is-poking-what-do-i-do/
- ↑ http://askanorthodontist.com/braces/my-wire-came-loose-and-is-poking-what-do-i-do/
- ↑ http://askanorthodontist.com/braces/my-wire-came-loose-and-is-poking-what-do-i-do/
- ↑ http://askanorthodontist.com/braces/my-wire-came-loose-and-is-poking-what-do-i-do/
About This Article
Article Summary
X
To temporarily fix a loose wire on your braces, use a small, dull object, like a pencil eraser or a cotton swab, to push the wire back into place so the wire is sitting close to your teeth again. Alternatively, you can use a pair of small wire cutters to snip off the loose wire. Just make sure you place your finger on the loose wire before you cut it so it doesn't fly into the back of your throat. If you're not comfortable cutting the loose wire and you're having trouble pushing it back into place, you can cover it with some dental wax so it stops hurting your gums until you see your orthodontist next. For tips from our Dental co-author, like how to use dental wax, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 152,219 times.
Reader Success Stories
- "How to cut the wire helped me, because I know I can try to do it myself rather than going to the orthodontist."
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"How to cut the wire helped me, because I know I can try to do it myself rather than going to the orthodontist."
