How to Use Lock Washers

PDF download Download Article
PDF download Download Article

Over time, bolted nuts and other threaded fasteners can loosen up due to friction and joint movement. Lock washers are a type of hardware that, unlike regular washers, can hold those objects in place. [1] When properly applied, lock washers provide a cheap, simple way to keep threaded fasteners steady over a long period of time.

Things You Should Know

  • Tighten your threaded fastener over the lock washer, making sure the washer is tight against the fastener and other surface.
  • Unscrew the fastener and pry the lock washer off with a flat screwdriver to remove. If needed, lubricate the washer with WD-40.
  • Choose a split, tooth, serrated Belleville, or tab washer depending on the type of hold you need.
Method 1
Method 1 of 3:

Assembling a Lock Washer

PDF download Download Article
  1. When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.
  2. To operate correctly, your lock washer must press against both the threaded fastener and the other adjacent surface, creating a tight connection. If the connection isn’t tight, press the fastener down until it is. This is particularly important when dealing with lock nuts, which require that that grooves of a toothed washer lock together with the grooves of the nut.
    Advertisement
  3. For small, general purpose jobs, tighten your nut or threaded fastener by turning a wrench or ratchet clockwise. Do this until the fastener is firm but can be loosened if necessary. For large or specialty jobs, consult your project manual or nut head markings for a specific torque value, then use a torque wrench to tighten your fastener to the specified amount. [2]
  4. Check to see that any teeth on your washer are completely covered by the nut or fastener head. For split washers, make sure that the washer is slightly out of alignment, indicating that it is exerting tension on the threaded fastener. If the washer is not operating correctly, loosen the nut or threaded fastener and fix the washer. [3]
    5. Advertisement
Method 2
Method 2 of 3:

Removing Lock Washers

PDF download Download Article
  1. For most nuts and fasteners, you can attach a simple wrench or vise-grip to the object and turn it counter-clockwise. For stuck nuts and threaded fasteners, you may need to use a stronger tool like a pipe wrench, which you can grip onto the fastener and turn like a regular wrench. [4]
  2. If you’re removing a split washer, place the screwdriver head beneath the washer or inside the split and push. If you’re removing a washer with teeth, place your screwdriver head under a tooth and push up, repeating with more teeth if necessary. For other washers, place your screwdriver head below the washer and push up. [5]
    • Depending on the amount of pressure the washer is under, it may break when removed.
  3. If the lock washer won’t budge, spray the area with a penetrating lubricant like WD-40, Royal Purple Max Film, or PB Blaster Penetrating Catalyst. This will loosen up your washer and make it easier to remove. [6] After applying the lubricant, repeat the previous step. [7]
  4. Some lock washers, like serrated Bellevilles, can withstand multiple uses easily. Other washers, like split locks, wear out after 1 or 2 uses. For safety, do not reuse split lock washers or washers that are damaged. If you’re dealing with high-stress joints, do not use old washers at all. [8]
    5. Advertisement
Method 3
Method 3 of 3:

Picking a Lock Washer

PDF download Download Article
  1. A split lock washer, also known as a helical spring washer, is the most common form of lock washer. Instead of using grooves, it operates more like a spring, holding the threaded fastener in place with friction. Use a split lock on a small, low-intensity job, since bigger loads will flatten the washer and make it useless. [9]
  2. With their jagged edges, tooth lock washers hold the nut or threaded fastener in place with a significant amount of force. They come in two forms: internal tooth and external tooth. Internal tooth washers work best on small screws or screws used in electrical grounding, while external tooth washers work best on large screws. [10]
    • Tooth lock washers work well with aluminum and soft plastic surfaces.
  3. Serrated Belleville washers are conical pieces of hardware with grooves on the surface. They are used to distribute tension at a joint, and though they won’t provide as much locking force as other lock washers, they can be useful when dealing with extremely large, tense loads. [11]
  4. If your nut or threaded fastener needs to withstand intense climates, go with a tab washer. These pieces of hardware have one or more tabs that, when bent against the nut or fastener head, hold it in place. [12]
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do lock washers work?
    Barry Zakar
    Handyman
    Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.
    Barry Zakar
    Handyman
    Expert Answer
    Lock washers look like any other washer except that the slit in it is raised slightly higher on one side. Because of this raised side, it's better at keeing tension on the screws.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 14
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      Assembly

      • Nut or threaded fastener
      • Lock washer
      • Wrench or ratchet (for small jobs)
      • Torque wrench (for large jobs)

      Removal

      • Wrench or vise-grip
      • Flat screwdriver
      • Pipe wrench (for stuck washers)
      • Spray lubricant (for stuck washers)

      You Might Also Like

      How to
      Undo Zip Ties Without Breaking Them
      How to
      Set and Use a Torque Wrench
      How to
      Remove Rivets
      How to
      Calibrate a Torque Wrench
      How to
      Make Velcro Stick Again
      How to
      Easily Load a Packing Tape Gun
      How to
      Hang Something on Brick
      How to
      Remove a Stuck Bolt
      The Easiest Ways to Apply Command Strips or Hooks at Home
      Best Ways to Remove a Snapped Off Bolt
      How to
      Make the Coolest Rubber Band Ball Ever
      How to
      Clean Velcro & Make It Stick Again
      How to
      Install Grommets
      How to
      Use a Rivet Gun
      Advertisement

      References

      1. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      2. ↑ https://www.youtube.com/watch?v=Nk_KSRCSokc
      3. ↑ https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19900009424.pdf
      4. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      5. ↑ https://www.youtube.com/watch?v=mGohIeG8PJ8&feature=youtu.be&t=15s
      6. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      7. ↑ http://dsportmag.com/the-tech/education/the-art-of-removing-stuck-nuts-and-bolts/
      8. ↑ http://www.ecmweb.com/content/belleville-blues
      9. ↑ https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19900009424.pdf
      1. ↑ https://www.assemblymag.com/articles/91344-whats-with-washers
      2. ↑ https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19900009424.pdf
      3. ↑ https://www.assemblymag.com/articles/91344-whats-with-washers

      About This Article

      Article Summary X

      To use a lock washer, start by placing the washer under the nut or threaded fastener. Check that the washer is tight against both surfaces and, if the threaded fastener and washer both have grooves, that they’re locked together. Then, tighten your threaded fastener with a wrench or ratchet until it is firm but can be loosened and removed if necessary. When finished, check that your washer’s teeth are fully covered or, if you’re using a split lock washer, that the threaded fastener is slightly out of alignment. For tips on removing and choosing a lock washer, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 336,258 times.

      Reader Success Stories

      • Dan V.

        Sep 30, 2019

        "Wasn't sure of the placement of the washer, lock washer and nut. This article explained it well and concisely."
      Share your story

      Did this article help you?

      Advertisement