Download Article
Download Article
A stethoscope is a medical instrument used to hear sounds made by the heart, lungs, and intestines. Using a stethoscope to hear sounds is called auscultation. [1] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source Medical professionals are trained to use stethoscopes, but you can learn how to use one too. Keep reading to learn how to use a stethoscope.
Steps
-
Get a high-quality stethoscope. A high-quality stethoscope is important. The better the quality of your stethoscope, the easier it will be for you to listen to your patient’s body.
- Single tubed stethoscopes are better than double tubed ones. The tubes in double tubed stethoscopes can rub together. This noise can make it hard to hear heart sounds.
- Thick, short, and relatively stiff tubing is best, unless you plan to wear the stethoscope around your neck. In that case, a longer tube is best.
- Make sure that tubing is free of leaks by tapping on the diaphragm (the flat side of the chest piece). As you tap, use the earpieces to listen for sounds. If you don’t hear anything, there may be a leak.
-
Adjust your stethoscope’s earpieces. It is important to make sure that the earpieces are facing forward and that they fit well. Otherwise, you might not be able to hear anything with your stethoscope. [2] X Research source
- Make sure that the earpieces are facing forward. If you put them in backwards, you won’t be able to hear anything. [3] X Research source
- Make sure that the earpieces fit snugly and have a good seal to keep out ambient noise. If the ear pieces don’t fit well, most stethoscopes have removable earpieces. Visit a medical supply store to purchase different earpieces. [4] X Research source
- With some stethoscopes, you can also tilt the earpieces forward stethoscopes to ensure a better fit. [5] X Research source
Advertisement -
Check the earpiece tension on your stethoscope. Make sure that the earpieces are close to your head but not so close that they’re uncomfortable. If your earpieces are too tight or too loose, readjust them. [6] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- If the earpieces are too loose, you won’t be able to hear anything. To tighten the tension, squeeze the headset near the earpieces.
- If the earpieces are too tight, they might hurt your ears and you’ll have a hard time using your stethoscope. To reduce the tension, pull the headset apart gently.
-
Choose an appropriate chest piece for your stethoscope. There are many different types of chest pieces available for stethoscopes. Choose one that is appropriate for your needs. Chest pieces come in different sizes for adults and children.
- The chest piece is also known as the diaphragm and bell. Different chest pieces have different acoustic levels based on whether you’re using them on adults, children, or people with cardiovascular issues. [7] X Research source
Advertisement
-
Select a quiet place to use your stethoscope. You won’t be able to accurately take readings if there’s a lot of background noise. Find a quiet area to ensure that the body sounds you want to hear will not be overpowered by background noises. [8] X Research source
-
Position your patient. To listen to the heart and abdomen, ask your patient to get into a supine position. To listen to the lungs, ask your patient to sit upright. [9] X Research source Heart, lung, and bowel sounds may sound different depending on the patient's posture (sitting, standing, lying on one's side, etc.), so you may want to take multiple readings from different positions. [10] X Research source
-
Decide whether to use the diaphragm or bell. The diaphragm, which is the flat side of the drum, is better for hearing medium- and high-pitched sounds. The bell, which is the round side of the drum, is better for hearing low-pitched sounds. [11] X Research source
- If you want a stethoscope with really high sound quality, consider an electronic stethoscope. These models provide amplification so that it is easier to hear heart and lung sounds, although they can be a little more expensive. [12] X Research source
-
Place the stethoscope directly on the patient’s skin. Use the stethoscope on bare skin to avoid picking up the sound of rustling fabric. If your patient has a lot of chest or back hair, keep the stethoscope still to avoid any interfering sounds. [13] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- To make your patient more comfortable, warm up the stethoscope by rubbing it on your sleeve, or consider buying a stethoscope warmer.
Advertisement
-
Hold the diaphragm over the patient’s heart. Position the diaphragm on the left side of the patient’s upper chest where the 4th to 6th ribs meet (almost directly under the breast). Hold the stethoscope between your pointer and middle fingers and apply enough gentle pressure so that you don’t hear your fingers rubbing together. [14] X Research source
-
Listen to the heart for a full 60 seconds. Ask the patient to relax and breathe normally. You should hear the normal sounds of the human heart, which resemble a “lub-dub” sound. The individual sounds in this two-tone pattern are known as the systolic and diastolic. Systolic is the “lub” sound and diastolic is the “dub” sound. [15] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
- The “lub,” or systolic, sound happens when the mitral and tricuspid valves of the heart close.
- The “dub,” or diastolic, sound happens when the aortic and pulmonic valves close.
-
Count the number of heartbeats you hear in a minute. The normal resting heart rate for adults and children over 10 years old is between 60-100 beats per minute (bpm). For well-trained athletes, the normal resting heart rate may only be between 40-60 bpm. [16] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
- There are several different ranges of resting heart rates to consider for patients under 10 years of age. Those ranges include:
- Newborns up to one-month-old: 70-190 bpm
- Infants 1-11 months: 80-160 bpm
- Children 1-2 years: 80-130 bpm
- Children 3-4 years: 80-120 bpm
- Children 5-6 years: 75-115 bpm
- Children 7-9 years: 70-110 bpm
- There are several different ranges of resting heart rates to consider for patients under 10 years of age. Those ranges include:
-
Listen for abnormal heart sounds. As you count the heartbeats, listen for any abnormal sounds. Anything that does not sound like that “lub-dub” may be considered abnormal. If you hear anything abnormal, your patient requires a further evaluation by a doctor. [17] X Trustworthy Source MedlinePlus Collection of medical information sourced from the US National Library of Medicine Go to source
- If you hear a whooshing sound or a sound that is more like “lub...shhh...dub,” your patient may have a heart murmur. A heart murmur is caused by blood rushing quickly through the valves. Many people have what are called “innocent” heart murmurs. [18] X Trustworthy Source MedlinePlus Collection of medical information sourced from the US National Library of Medicine Go to source However, some murmurs point to issues with the heart valves, so you advise your patient to see a doctor if you detect a heart murmur.
- If you hear a third sound that resembles a low-frequency vibration, your patient might have a ventricular defect. This third heart sound is referred to as S3 or a ventricular gallop. Advise the patient to see a doctor if you hear a third heart sound. [19] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- Try listening to samples of normal and abnormal heart sounds to help you determine if what you are hearing is normal.
Advertisement
-
Ask your patient to sit straight up and breathe normally. Put the stethoscope on the patient’s back, behind one of the lungs. As you listen, you can ask the patient to take a deep breath if you cannot hear breath sounds or if they are too quiet to determine if there are any abnormalities.
-
Use the diaphragm of your stethoscope to listen to your patient’s lungs. As you listen to the patient’s lungs, move the stethoscope to the upper and lower lobes. Move from the back to the front of the patient’s chest.
- Rotate as many times as you need between the upper part of the chest, the midclavicular line of the chest, and the bottom part of the chest. Make sure to listen to the front and back of all of these regions.
- Make sure to compare both sides of your patient’s lungs and note if anything is different between the left and right lungs.
- By covering all of these positions you will be able to listen to all of the lobes in your patient’s lungs. [20] X Research source
-
Listen for normal breath sounds. Normal breath sounds are clear and consistent, like listening to someone blowing air into a large bottle. Listen to a sample of healthy lungs and then compare the sounds to what you hear in your patient’s lungs.
- There are two types of normal breath sounds: [21]
X
Research source
- Bronchial breath sounds are those heard within the tracheobronchial tree.
- Vesicular breath sounds are those heard over the lung tissue.
- There are two types of normal breath sounds: [21]
X
Research source
-
Listen for abnormal noise in your patient’s breathing. Abnormal breath sounds include wheezing, stridor, rhonchi, or rales. If you do not hear any strange sounds, the patient may have air/fluid around the lungs, thickness in the chest wall, a throttled airflow, or over-inflation in the lungs. [22] X Research source
- There are four types of abnormal breath sounds:
- Wheezing sounds like a high-pitched sound when the person exhales, and sometimes when they inhale as well. Many patients who have asthma also have wheezes. [23] X Research source
- Stridor sounds like high-pitched musical breathing. It’s similar to wheezing, and heard most often when the patient inhales. Stridor is caused by a blockage in the back of the throat. [24] X Research source www.onhealth.com/content/1/normal_healthy_heart_rate_charts_health_heart
- Rhonchi sounds like snoring. Rhonchi cannot be heard without a stethoscope and happens because the air is following a “rough” path through the lungs (usually because the path is blocked). [25] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- Rales sounds like popping bubble wrap or rattling in the lungs. Rales can be heard when a person inhales. [26] X Research source
- There are four types of abnormal breath sounds:
Advertisement
-
Place the diaphragm on your patient’s bare stomach. Use your patient’s belly button as the center and divide your listening around the belly button into four sections. Listen to the upper left, upper right, lower left, and lower right. [27] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
-
Listen for normal bowel sounds. Normal bowel sounds typically resemble stomach growls or grumbles. Anything else may suggest that something is wrong and that the patient requires further evaluation. [28] X Trustworthy Source MedlinePlus Collection of medical information sourced from the US National Library of Medicine Go to source
- You should hear “growling” in all four sections. Sometimes after surgery, bowel sounds will take a while to return.
-
Pay attention and listen for abnormal bowel sounds. Most of the sounds that you hear when listening to your patient’s bowels are just the sounds of digestion. Although most bowel sounds are normal, some abnormalities could point to a problem. If you are unsure if the bowel sounds you hear are normal and/or the patient has other symptoms, tell the patient to see a doctor for further evaluation. [29] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- If you do not hear any bowel sounds, that may mean that something is blocked in the patient’s stomach. It can also indicate constipation.
- If the bowel sounds don’t return over time, there may be a blockage. In this case, the patient needs further evaluation by a doctor. [30] X Trustworthy Source MedlinePlus Collection of medical information sourced from the US National Library of Medicine Go to source
- If the patient has hyperactive bowel sounds followed by a lack of bowel sounds, that could indicate that there has been a rupture or necrosis of the bowel tissue. [31] X Research source
- If the patient has very high-pitched bowel sounds, this may indicate that there is an obstruction in the patient’s bowels. [32] X Research source
- Slow bowel sounds may be caused by prescription drugs, spinal anesthesia, infection, trauma, abdominal surgery, or overexpansion of the bowel. [33] X Research source
- Fast or hyperactive bowel sounds can be caused by Crohn’s disease, a gastrointestinal bleed, food allergies, diarrhea, infection, and ulcerative colitis. [34] X Research source
Advertisement
-
Determine if you need to check for a bruit. If you have detected a sound that seems like a heart murmur, you should also check for a bruit. Since heart murmurs and bruits sound similar, it is important to check for both if one is suspected.
-
Place the diaphragm of your stethoscope over one of the carotid arteries. The carotid arteries are located in the front of your patient’s neck, on either side of the Adam’s apple. If you take your index and middle finger and run them down the front of your throat, you will trace over the locations of your two carotid arteries. [35] X Research source
- Be careful not to press too hard on the artery or you may cut off circulation and cause your patient to faint. Never press on both carotid arteries at the same time.
-
Listen for any bruits. A bruit makes a whooshing sound that indicates that an artery is narrowed. Sometimes, a bruit may be confused with a murmur because they sound so similar. However, a bruit’s whooshing sound will be much louder than a traditional murmur when you listen to the carotid artery specifically. [36] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
- You may also want to listen for bruits over the abdominal aorta, renal arteries, iliac arteries, and femoral arteries.
Advertisement
-
Wrap the blood pressure cuff around your patient’s arm, right above the elbow. Roll up your patient’s sleeve if it is in the way. Make sure that you use a blood pressure cuff that fits your patient’s arm. You should be able to wrap the cuff around your patient’s arm so that it is snug, but not so tight that the patient is in pain. [37] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
- If the blood pressure cuff is too small or too large, get a different size.
-
Press the diaphragm of the stethoscope over the brachial artery. Set the stethoscope just below the cuff's edge. You can also use the bell if you have trouble hearing with the diaphragm. You will be listening for Korotkoff sounds , which are low-tone knocking/thumping sounds. This is the patient’s systolic blood pressure.
- If you’re having trouble, try doing this on your own body. Find your pulse in your inner arm to help you determine where your brachial artery is located. [38] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
-
Inflate the cuff to 180 mm Hg, or 30 mm above your expected systolic pressure. You can find the reading by looking at the sphygmomanometer, which is the gauge on the blood pressure cuff. Once you reach 180 mm HG (or 30 mm above the expected rate), release air from the cuff at a moderate rate (around 3 mm/sec). As you release the air, listen with the stethoscope and keep your eyes on the sphygmomanometer. [39] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
-
Listen for Korotkoff sounds to find the diastolic pressure. The first knocking sound that you hear is your patient’s systolic blood pressure. Note that number, but keep watching the sphygmomanometer. After the first sound stops, note the number that it stops on. That number is the diastolic pressure. [40] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
-
Release the pressure entirely and remove the cuff. Deflate the cuff entirely and take it off of your patient after you’ve gotten the second number. You now have two numbers that make up your patient’s total blood pressure. Record these numbers side by side, separated by a slash. For example, 110/70. [41] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
-
Wait a few minutes if you want to check the patient’s blood pressure again. You may want to re-measure if the patient’s blood pressure is high. This is especially a good idea if the patient seems stressed or they’re not used to getting their blood pressure taken. [42] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to source
- A systolic blood pressure above 120 or a diastolic blood pressure above 80 indicates that your patient may have high blood pressure. In that case, your patient should seek further evaluation by a doctor.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Clean your stethoscope often. You should clean your stethoscope after each patient to avoid infection. Use alcohol pads or cleaning cloths with 70% isopropyl alcohol to disinfect your stethoscope. [43] X Research sourceThanks
- Always ensure that you are in a quiet environment, that you are listening out for anomalies, and that if you are in doubt, you refer the patient to a qualified healthcare practitioner.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don't talk into or tap the drum while you have the stethoscope in your ears. It really hurts. It can also cause hearing damage, depending on how hard you tap the drum or how loudly you talk into it.Thanks
- Don't immerse your stethoscope in water or expose it to extreme heat or cold. Doing any of these things can cause damage.Thanks
- Always seek medical attention if you hear any unusual sounds during auscultation.Thanks
Advertisement
Things You'll Need
- A good quality stethoscope
References
- ↑ https://my.clevelandclinic.org/health/diagnostics/23080-auscultation
- ↑ https://www.littmann.com/3M/en_US/littmann-stethoscopes/my-stethoscope/using-your-stethoscope/
- ↑ https://www.littmann.com/3M/en_US/littmann-stethoscopes/my-stethoscope/using-your-stethoscope/
- ↑ https://www.littmann.com/3M/en_US/littmann-stethoscopes/my-stethoscope/using-your-stethoscope/
- ↑ https://www.littmann.com/3M/en_US/littmann-stethoscopes/my-stethoscope/using-your-stethoscope/
- ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3650582/
- ↑ https://multimedia.3m.com/mws/media/1749423O/3m-littmann-stethoscope-comparison-chart.pdf
- ↑ https://pressbooks.library.torontomu.ca/vitalsign/chapter/manual-blood-pressure-measurement/
- ↑ https://depts.washington.edu/physdx/heart/tech.html
- ↑ https://littmann.3mae.ae/3M/en_AE/littmann-ae/education/training/
- ↑ https://pressbooks.library.torontomu.ca/vitalsign/chapter/manual-blood-pressure-measurement/
- ↑ https://www.nursingcenter.com/ncblog/august-2019/stethoscopes
- ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3650582/
- ↑ https://www.uptodate.com/contents/auscultation-of-heart-sounds
- ↑ https://my.clevelandclinic.org/health/articles/23346-apical-pulse
- ↑ https://my.clevelandclinic.org/health/articles/17062-heart--blood-vessels-simple-clues-to-your-heart
- ↑ https://medlineplus.gov/ency/article/003266.htm
- ↑ https://medlineplus.gov/ency/article/003266.htm
- ↑ https://www.ncbi.nlm.nih.gov/books/NBK342/
- ↑ https://emedicine.medscape.com/article/1894146-overview#a15
- ↑ https://www.meddean.luc.edu/lumen/MedEd/medicine/pulmonar/pd/pstep29.htm
- ↑ https://www.meddean.luc.edu/lumen/MedEd/medicine/pulmonar/pd/pstep29.htm
- ↑ https://www.nlm.nih.gov/medlineplus/ency/article/007535.htm
- ↑ www.onhealth.com/content/1/normal_healthy_heart_rate_charts_health_heart
- ↑ https://www.ncbi.nlm.nih.gov/books/NBK537253/
- ↑ https://www.nlm.nih.gov/medlineplus/ency/article/007535.htm
- ↑ https://my.clevelandclinic.org/health/diagnostics/23080-auscultation
- ↑ https://medlineplus.gov/ency/article/003137.htm
- ↑ https://www.ncbi.nlm.nih.gov/books/NBK537253/
- ↑ https://medlineplus.gov/ency/article/003137.htm
- ↑ https://www.nlm.nih.gov/medlineplus/ency/article/003137.htm
- ↑ https://pressbooks.library.ryerson.ca/ippa/chapter/auscultation/
- ↑ https://www.nlm.nih.gov/medlineplus/ency/article/003137.htm
- ↑ https://www.nlm.nih.gov/medlineplus/ency/article/003137.htm
- ↑ https://meded.ucsd.edu/clinicalmed/heart.htm
- ↑ https://my.clevelandclinic.org/health/articles/24096-carotid-bruit
- ↑ https://my.clevelandclinic.org/health/diseases_conditions/hic_Hypertension_High_Blood_Pressure/hic_Checking_Your_Blood_Pressure_at_Home
- ↑ https://my.clevelandclinic.org/health/diseases_conditions/hic_Hypertension_High_Blood_Pressure/hic_Checking_Your_Blood_Pressure_at_Home
- ↑ https://my.clevelandclinic.org/health/diseases_conditions/hic_Hypertension_High_Blood_Pressure/hic_Checking_Your_Blood_Pressure_at_Home
- ↑ https://www.ncbi.nlm.nih.gov/books/NBK539778/
- ↑ https://my.clevelandclinic.org/health/diseases_conditions/hic_Hypertension_High_Blood_Pressure/hic_Checking_Your_Blood_Pressure_at_Home
- ↑ https://my.clevelandclinic.org/health/articles/17062-heart--blood-vessels-simple-clues-to-your-heart
- ↑ https://www.littmann.com/3M/en_US/littmann-stethoscopes/my-stethoscope/using-your-stethoscope/care/
About This Article
Article Summary
X
To use a stethoscope, start by adjusting the earpieces so they fit snugly and have a good seal to keep out any background noises. Then, have your patient sit still as you hold the flat side of the stethoscope drum over their heart. Once you hear their heartbeat, which sounds like “lub-dub," start a 1-minute timer and count the number of beats you hear to get their resting heart rate. You can also use a stethoscope to listen to your patient’s lungs or abdominal sounds, or check their blood pressure if you have a blood pressure cuff. For tips from our Medical reviewer on how to choose the right stethoscope, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 749,432 times.
Reader Success Stories
- "Great article for me because this is my final year of high school and I have a PCT class that requires we know these things." ..." more
Advertisement
87%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Great article for me because this is my final year of high school and I have a PCT class that requires we know these things."
..."
more
"This is a great article and it helped me know what I needed to know. I am learning to become a pediatric surgeon. "
"Listening to the heart, lungs, abdomen and BP is very helpful. The methods helped too, thanks a lot. "
"I'm starting PCT training and it gave me a brief review of things I will have to train for. "
"The thing that helped me the most was how you explained in the pictures how to use it."
