PDF download Download Article PDF download Download Article

Sansevieria, also known as snake plant and mother-in-law’s tongue, is a hardy plant with long, broad leaves. Because of their adaptability and tolerance, they’re often used as houseplants. Their broad leaves soak up toxins and carbon dioxide and produce oxygen to help purify the air in the room. Though they are tough, they do need some care in order to stay healthy. If you choose a healthy plant, set up the right environment, and maintain it properly, your sansevieria will have a long and healthy life.

Method 1
Method 1 of 3:

Re-Potting Your Plant

PDF download Download Article
  1. Dark leaves on a snake plant indicate that it is healthy and well-nourished. Leaves that have a yellowish tinge on the outer edge of the leaves or leaves that are pale and floppy could indicate that the plant is dying. Don’t re-pot your plant until it’s healthy so it can adjust to its new home and survive the transfer. [1]
    • A pale sansevieria doesn’t necessarily mean that the plant will die. It may just need some water and care and you can bring it back to life!
  2. Sansevieria are very susceptible to rotting out, especially if they sit in water for too long. [2] Choose a pot that has good drainage, like a terra cotta pot or a pot made with another porous material so your snake plant isn’t at risk of rotting. [3]
    • Porous materials include terra cotta, clay, timber, paper pulp, and other natural materials that allow moisture to move through them.
    • If you want to use a decorative pot that doesn't have drainage holes, place your plant inside a plastic grow pot, then set the grow pot inside of the decorative pot. [4]

    Tip: If you plan to keep your snake plant outside, choose a darker color pot to attract more heat, especially if you live in an area that freezes.

    Advertisement
  3. Snake plants don’t require too much water, and their roots can actually be damaged if they’re allowed to soak in soil that is full of moisture. To allow for good drainage and a healthy root system, choose a free-draining soil mix or even a soilless potting mixture. Place your sansevieria into the potting mixture and cover it with enough to hold it secure in the pot. [5]
    • Many potting mixes that you can purchase from gardening stores are designed to help control moisture and improve drainage. Check the packaging for information on the potting mix.
    • Use a soilless potting medium like vermiculite, peat moss, or perlite.
  4. When you’re ready to re-pot your snake plant, take a firm hold of the base of the leaves, where they connect to the soil. Gently slide the plant out of its pot. [6]
    • Don’t shake any dirt loose from the roots.
    • Be careful not to yank or jerk the plant or you could separate the leaves from the roots and kill the plant.
  5. Move the plant to its new pot and add enough soil or soilless mixture to support the plant and keep it upright. Add more soil mixture if the sansevieria leans to one side or is unstable in the pot. [7]
    • Hold the snake plant in an upright position while you add soil to the pot.
    • Pack the soil down by patting it with your hand to add support to the plant.
  6. Advertisement
Method 2
Method 2 of 3:

Creating the Right Environment

PDF download Download Article
  1. Snake plants are hardy, tough plants that can survive in full sunlight, as well as very low light. But they really thrive in indirect sunlight, which is why they are such great houseplants. [8]
    • Indirect sunlight can be near an eastern facing window or in the center or corner of a room that isn’t directly exposed to sunlight coming in through a window.
    • Snake plants prefer natural light, so avoid putting them in a room without any windows.
  2. Sansevieria prefer warmer temperatures, but anything above 85 °F (29 °C) is dangerous for the plant and will cause it to start to wilt. Snake plants are also susceptible to cold temperatures. Anything below 50 °F (10 °C) can kill the roots of the plant. [9]
    • Temperature fluctuations do not generally affect snake plants as long as the temperature stays within their preferred range.

    Tip: Frost is especially harmful to sansevieria. If you plan to keep your snake plant outside, be sure to bring it in before a hard freeze!

  3. Snake plants have a low level of toxicity, but they can cause pain, nausea, vomiting, and diarrhea if they’re ingested. Pets and small babies are at particular risk of accidentally eating some of the leaves. Be sure to place your snake plant somewhere out of reach to them. [10]
    • A floating shelf or stool can elevate your plant and keep it out of reach.
  4. Advertisement
Method 3
Method 3 of 3:

Maintaining Your Sansevieria

PDF download Download Article
  1. Snake plants do not need lots of water, which is one of the reasons why they’re so easy to care for. In fact, you may be more likely to overwater the plant and put the roots at risk of rotting. [11] To be safe, only water your snake plant when the top layer of the soil is completely dry. Check the soil by sticking your finger into it to see if there is moisture. [12]
    • Add enough water to saturate the soil, but not so much that there’s standing water in the pot. The excess water should drain out of the pot.

    Tip: If you’re using a soilless potting mixture, water your sansevieria once a week.

  2. Snake plants don’t need much fertilizer, but they will grow more if you fertilize them during their growing season in the spring and summer. Use a basic fertilizer for houseplants and only add it every few weeks or every other watering. [13]
    • Check the packaging on the fertilizer that you choose to follow the correct dosage and method.
    • Never give your plants fertilizer while they're dormant, which is usually during the winter months. [14]
  3. To ensure that your snake plant grows evenly and all of the leaves are receiving adequate exposure to sunlight, rotate the pot about a quarter turn. This will also keep your plant growing vertically, rather than leaning in one direction. [15]
    • An easy way to remember is to turn the pot whenever you water your sansevieria.
  4. Unlike other houseplants, pruning snake plants does not stimulate growth. They are such slow growers that injuring them by trimming or pruning will actually cause them to slow their growth as they heal. [16]
    • If you want to keep your snake plant a specific height and size, trim it sparingly to keep it healthy. Repeated pruning and trimming will damage them and could kill them.
  5. Mealybugs and spider mites are the main pests that like to feed and make their homes on snake plants. Whenever you water your plant, inspect the leaves for any insects. [17]
    • You can get rid of mealybugs by dropping a small drop of alcohol onto them.
    • Wash the leaves with warm water and a cloth to remove spider mites.
    • Pests may be a sign that your plant is unwell. Restoring the plant's health will usually prevent bugs from preying on it.
  6. Advertisement


Video

Expert Q&A

Search
Add New Question
  • Question
    What does it mean if my snake plant's leaves are brown and wilted?
    Melinda Meservy
    Plant Specialist
    Melinda Meservy is a Plant Specialist and the Owner of Thyme and Places, a botanical boutique offering plants and gifts in Salt Lake City, Utah. Before starting her own business, Melinda worked in process and business improvement and data analytics. Melinda earned a BA in History from the University of Utah, is trained in lean and agile methodologies, and completed her Certified Professional Facilitator certification. Thyme and Places offers indoor plants and containers, a fully stocked potting bench, and tips on plants to suit your space and lifestyle.
    Plant Specialist
    Expert Answer
    Brown, wilted leaves are a good sign you're overwatering. Make sure your snake plant is in a pot that has drainage holes, and only water it when the soil dries out.
  • Question
    How do I take care of a snake plant?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    The snake plant is a hardy plant and doesn’t need a lot of attention; it’s an ideal plant for people who aren’t around much and who tend to forget plant care! Use quality potting soil to plant it in, keep it in medium light (it’ll tolerate most light but not direct sunlight because this burns them) and water every 2 to 6 weeks (only when the soil is dry). Keep an eye out for pests (mealybugs and aphids), which will usually be rare. It’s an easy-care plant that is generally very forgiving; the article above contains more details to guide you.
  • Question
    Do all snake plants clean the air?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    A snake plant is one of various plants considered ideal to clean indoor air, perhaps even the "best" indoor plant for removing air impurities because it is such a hardy plant indoors. Various studies, including one from NASA (Wolverton, Johnson and Bounds 1989), showed this plant’s ability to remove toxins such as benzene and formaldehyde from the air of a small room or indoor space. However, later studies (e.g. Kays 2009) are less optimistic about the ability of a plant alone to fix indoor air toxins, due to the many constant ebbs and flows of air from outside. Also, potting soil microorganisms play a part, not just the plant. Beyond a small room, you'd need more than 1 plant to cover the whole house and a standard home might require 10 to 20 plants to achieve real benefits––a bit of a forest!
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To care for a sansevieria or snake plant, place it in a windowsill that faces east, west or north so it gets the right amount of sunlight. You should also put up sheer drapes on the window in front of your plant to filter out intense afternoon sun. To keep the light exposure even, rotate your plant by a quarter turn each week. Before watering your snake plant, wait until the soil feels dry, and sprinkle the water along the edge of the pot, rather than dumping it all in center. If you can, use distilled water so the minerals in tap water don't harm your plant. To learn how to fertilize and transplant your snake plant, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 885,108 times.

      Reader Success Stories

      • Marla Thomas

        May 28, 2017

        "I had to bring my dad's snake plant back to life. Long story short, I sprayed a weed killer too close to ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement