How to Change the Color of Metal with Paint, Heat, or Dyeing

PDF download Download Article
Learn to add color to metal with these DIY methods
PDF download Download Article

Colored metal makes for beautiful decorations and artwork. But have you ever wondered how it’s done? As it turns out, there are multiple methods for changing the color of metal, and each produces a totally different result. This tutorial will teach some basic options for color metal using materials anyone can buy. Keep reading to learn how to turn everyday metal items into iridescent pieces of art.

Things You Should Know

  • Paint metals using rust-resistant spray primer and 2-3 coats of spray paint. Remove rust, dirt, and old paint before applying new paint to your metal.
  • Anodize objects made with pure aluminum and aluminum alloys using acid and electricity. Then use metal fiber dye to give your object a specific color.
  • Use a flame to alter the colors of metal objects made with steel, copper, or iron. You can’t choose which colors appear, but they can still be beautiful.
Method 1
Method 1 of 3:

Spray Painting Metals

PDF download Download Article
  1. Mix enough water and bleach to fully submerge the metal object. For instance, you could submerge a metal wrench in a solution containing 3 cups (700 mL) of water and 1 cup (240 mL) of bleach. Soak your object for 20 minutes, then rinse it with plain water. [1]
    • Skip this step if your object is new or doesn’t have any trace of mildew.
    • Wear kitchen gloves while handling your object to protect your hands from bleach.
  2. Use a wire brush to remove rust and paint from your object. This will help the paint adhere to the metal in later steps. Wear safety googles and a dust mask to protect your eyes and lungs from metal fragments, and use a pair of worker’s gloves to protect your hands from injuries.
    • You can do this with an electric sander, or sand it by hand. Choose sandpaper with a grit between 36 and 100.
    • You can also use liquid rust remover to eliminate rust, paint, and any debris stuck to the metal.
    Advertisement
  3. Mineral spirits are a type of turpentine-free paint thinner, which you can buy from a hardware store. Wipe thoroughly to remove any dust and debris to ensure the paint bonds to the metal in the next steps. Then use a dry rag to wipe away the mineral spirits.
    • If some paint won’t come off the metal, wipe it again with a cloth soaked in turpentine . [2]
    • Avoid spilling mineral spirits on painted surfaces since it will remove the paint.
  4. Hold the can 12 inches (30 cm) from the object and spray continuously until the metal is fully covered. Use rust-resistant primer specifically recommended for metal surfaces, like oxidizing primer. If possible, use a primer color that matches the color of the paint you plan to use so the primer isn’t visible under the paint. Allow the primer to dry according to the directions printed on the can. [3]
    • Apply the primer immediately after cleaning the metal to prevent dust and dirt from accumulating.
    • If feasible, choose a primer and paint made by the same brand. That way, the colors are more likely to match and the paints will be chemically compatible.
    • If your metal object is galvanized, choose an alkyd-free primer. This type of primer bonds better to galvanized metal surfaces.
    • Use painter’s tape to cover any parts of the metal you want to avoid painting. For instance, you may want to paint a wrench’s handle but leave the upper section paint-free.
  5. Use rust-resistant spray paint designed for metal surfaces. Hold the can 12 inches (30 cm) and spray continuously until the primer is fully covered with paint. Leave the paint to dry. [4]
    • Check the product directions for the paint’s drying time. In some cases, the paint may take longer to try than the primer.
  6. This prevents the paint from flaking off, helping it last longer. Let this layer fully dry before handling your object. [5]
    • For best results, wait 24 hours between applying coats of paint. [6]
    7. Advertisement
Method 2
Method 2 of 3:

Anodizing & Dyeing Metal

PDF download Download Article
  1. Other types of metal, like steel or iron, won’t work. Make sure the aluminum is fully exposed with no paint or coatings of any kind. Wipe down the surface with a dry rag to remove debris.
    • You can also use objects made from aluminum alloys (mixtures of metal that contain aluminum).
  2. Make sure there is plenty of air circulation to prevent acid fumes from building up during the next steps. You can also work in a backyard or other outdoor space.
    • Keep children and pets away from your workspace.
  3. Choose plastic tubs large enough to fit your metal object inside of them, with room on top to spare. Choose a plastic jug with a handle that holds at least 1 gallon (3.79 L) of liquid.
    • Opt for a plastic water pitcher or a similar jug that’s meant for pouring. You’ll use it in future steps to hold and pour a neutralizing solution, which will react with acid.
  4. Wearing rubber gloves, wash your object with dish detergent and water. In one of your plastic tubs, mix 3 tbsp (44 mL) of lye with 1 gallon (3.76 L) of water. Submerge your object in the lye-water mixture for 3 minutes. Then rinse your object with distilled water . [7]
    • Discard the lye-water mixture and clean the plastic tub thoroughly with soap and water. Dry it with a rag so you can use it in future steps.
    • Always wear gloves when handling your object, especially after cleaning it. Fingerprints and oils from your skin can interfere with the anodization.
  5. Use 2 cups (473 mL) of baking soda and 1 gallon (3.79L) of distilled water. This will form your neutralizing solution. Keep this neutralizing solution nearby at all times. If you spill any acid (or any of the acid solution in the next steps), pour the neutralizing solution on the acid to prevent corrosion. [8]
    • If you get acid on your skin, pour the neutralizing on your skin to prevent acid burns.
  6. This will form your acid solution. Make enough acid solution to fully submerge your metal object in the plastic tub. To prevent fizzing, pour the water first, then add the acid. [9]
    • For a small object, for example, you could use 5 quarts (4750 mL) of water and 1 quart (950 mL) of sulfuric acid .
    • Wear rubber gloves when handling your acid solution.
  7. Wearing rubber gloves, attach one cable to the car battery’s positive terminal and the other cable to the negative terminal. Connect the other end of the negative cable to your metal object. Then connect the other end of the positive cable to a piece of aluminum foil.
    • Use a 20-volt car battery .
    • Avoid letting your metal object contact the aluminum foil after the jumper cables are connected. This could short-circuit your battery and cause sparks.
  8. Using rubber gloves, carefully lower your metal object into the acid solution, with the cable still attached. Then lower the aluminum foil into the solution, keeping its cable attached. Make sure the aluminum foil doesn’t touch the metal object, and that the two cables don’t come into contact.
    • Avoid touching the solution with your gloved hand.
    • Keep your rubber gloves on throughout this step to prevent electric shocks and acid burns.
  9. The metal will anodize as negatively charged aluminum atoms attract the positively charged sulfuric acid molecules. Lots of bubbles will form around the aluminum foil, but very few will appear around the object you’re anodizing.
    • For safety, stay in the area while your object anodizes.
    • If you smell burning or see sparks or smoke coming from the wires or your battery, disconnect the wires from the battery terminals one at a time.
    • Wear rubber gloves whenever you touch the wires or car battery.
    • Keep a fire extinguisher nearby. If you see smoke or fire, put it out immediately with the fire extinguisher.
  10. Wearing your rubber gloves, disconnect the clamp from the battery’s negative terminal, followed by the clamp on the positive terminal. Pull the wire and aluminum foil from the acid bath and disconnect the cable from the foil. Then do the same for your metal object.
    • Be careful not to let acid drip off onto surfaces as you remove items from the tub.
  11. Turn it back and forth under the water to clean it thoroughly. Wash the metal for 2-3 minutes to ensure all the acid is gone. Then do the same with your aluminum foil.
    • To prevent acid from dripping on the floor, hold the container with your neutralizing solution under your object as you move it to the sink.
    • Discard the aluminum foil once it’s clean, or save it for a future project.
    • Discard the acid bath down a drain and clean the plastic tub thoroughly.
  12. For instance, you may need to mix the dye with hot or boiling water. Once you’ve prepared the dye bath, pour it into an empty plastic tub. Add enough dye bath to fully submerge your metal object in the next steps. [10]
    • Note any warnings on the product label. For example, the dye may stain fabrics, discolor bowls or metal cooking pots, etc.
  13. The amount of time needed depends on your desired color and the specific dye you use. Check the dye’s product directions and adjust the time accordingly. [11]
    • The dye can be reused. After you’re finished, store it in a plastic water jug for future projects.
    • You may not get the exact color you expected. It may turn out lighter, have a slightly different hue, etc. Experiment with multiple objects made from the same material (that is, the same aluminum alloy, or pure aluminum) to compare the results.
  14. Boil water in a large pot over a stove, then immerse the object in the boiling water. Remove the object after 30 minutes and place it on a dry towel to cool. Once the object is completely cool, the metal will shine with its permanent new color. [12]
  15. Rinse items with the neutralizing solution to remove the acid. Scrub any surfaces used to handle the acid, such as tables or workbenches. When finished, wash your hands thoroughly with soap and water. [13]
    • Keep your rubber gloves while handling your items until they’re completely clean.
    • Cover your car battery’s terminals with their rubber casings, then store the battery in a safe location away from children and pets.
    16. Advertisement
Method 3
Method 3 of 3:

Coloring Metals with Heat

PDF download Download Article
  1. Use a torch or Bunsen burner to create a variety of vivid colors. For more subtle variation, use an open flame like a stove or campfire. Choose any metals containing copper or iron, such as steel. [14]
    • Use tongs to grip the metal and avoid burns.
    • You can also heat the metal in an oven to produce a more balanced, even coloration.
    • Depending on the temperature and type of metal, you can create colors ranging from pale yellow to blue.
  2. You can’t control the colors that appear. However, heating the metal for longer produces more vivid colors, allowing random patterns of coloring to emerge. You can also use a small, narrow flame to trace patterns on large pieces of metal. [15]
    • Heat metal in a well-ventilated area.
    • Wear oven gloves and use caution to prevent burns.
    • Use clean metal that’s free of rust, dirt, and paint.
  3. Cool the metal slowly by setting it down on a rock or concrete floor, away from flammable materials. For faster cooling, dip the metal in a bucket of cold water. [16]
    • Turn off the torch or heat source when finished. Close burners and torches, and douse campfires with water or sand.
    • The colors may change as the metal cools. For example, reds may cool into bluish purples.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Where would I get sulfuric acid?
    Community Answer
    You can get it at any shop which sells chemicals. If not, you can buy it online.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 7
  • Question
    Will these steps work for metal rings?
    Community Answer
    Most likely, but it depends on the type of metal.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 4
  • Question
    What kind of paint should I use to color metal for figures?
    Community Answer
    Use self-etching primer first, and then any paint you'd like! Enamels tend to be best on something outside that will see a lot of contact.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Working with sulfuric acid is high risk; follow safety instructions and have safety precautions and protocols in place.
        Thanks
        Helpful 9 Not Helpful 2
      • Use safety equipment when handling all chemicals, and when sanding and painting.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      Painting Metals

      Anodizing Metals

      Coloring Metals with Heat


      You Might Also Like

      10 Tips to Drill through Metal
      How to
      Cut Aluminum
      How to
      Quickly Rust Metal, Including Steel and Iron
      How to
      Age Brass for a Worn, Antique Look
      How to
      Quickly Turn Copper Darker
      How to
      Connect Metal Without Soldering
      How to
      File Metal
      How to
      Bend Sheet Metal
      Easiest and Fastest Ways to Cut Copper Pipe to the Right Length
      How to
      Blue Steel
      How to
      Antique Stainless Steel
      How to
      Make Copper Look Aged
      How to
      Bend Aluminum with Your Hands or a Press
      How to
      Bend Rebar
      Advertisement

      References

      1. ↑ https://www.pema.pa.gov/Recovery/Documents/Mold-Mildew-Cleaning-Up-Flood-Damaged-Home.pdf
      2. ↑ https://city.milwaukee.gov/AntiGraffiti/Graffiti-Removal-Techniques.htm#.VteNnPkrJaQ
      3. ↑ https://www.montanacolors.com/downloads/How%20to%20use%20Montana%20Colors%20sprays.pdf
      4. ↑ https://www.montanacolors.com/downloads/How%20to%20use%20Montana%20Colors%20sprays.pdf
      5. ↑ https://www.montanacolors.com/downloads/How%20to%20use%20Montana%20Colors%20sprays.pdf
      6. ↑ https://www.bobvila.com/articles/2293-paint-makeovers-an-expert-tells-all/#.VsHOscdh3dQ
      7. ↑ https://p2infohouse.org/ref/29/28190.pdf
      8. ↑ https://p2infohouse.org/ref/29/28190.pdf
      9. ↑ https://p2infohouse.org/ref/29/28190.pdf
      1. ↑ https://p2infohouse.org/ref/29/28190.pdf
      2. ↑ https://p2infohouse.org/ref/29/28190.pdf
      3. ↑ https://p2infohouse.org/ref/29/28190.pdf
      4. ↑ https://p2infohouse.org/ref/29/28190.pdf
      5. ↑ https://www.technologystudent.com/equip1/heat1.htm
      6. ↑ https://www.technologystudent.com/equip1/heat1.htm
      7. ↑ https://www.technologystudent.com/equip1/heat1.htm

      About This Article

      Article Summary X

      Coloring metal can be done by spray painting, anodizing the metal with metal dye, or creating a patina film. To spray paint metal, first soak your metal in bleach and water solution to kill any mildew and remove any discoloration. You can also remove any rust with a wire brush or clean it with mineral spirits, if needed. Once your metal is clean, spray a coat of primer in a smooth, even layer. When possible, pick a spray primer that’s the same color as the finish and is rust-resistant. After the primer dries, apply an even coat of paint, allow it to fully dry, then apply a second coat to increase the life of your paint job. To learn how to color metal by anodizing it, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 307,216 times.

      Reader Success Stories

      • Anonymous

        Jul 2, 2016

        "I read your articles and it set me to thinking. I had a cap badge bright and shiny, and wanted to tone down the ..." more
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement