Running 101: How to Pick and Put Spikes on Track Shoes (Track Spikes)

Co-authored by Emily Liu

Last Updated: April 5, 2023 References

Track shoes that you can put spikes on (also known as track spikes) are designed to help you run faster by providing extra grip and traction. If you want to start practicing with spikes but have never put them on your track shoes before, or you’re replacing your spikes for the first time, you’re in the right place⁠—we’ll walk you through the process step by step! ^{[1]
X
Research source}

Part 1

Part 1 of 2:

Choosing Track Spikes

Download Article

1
Sprinting spikes take 8 or more spikes for speed and power. ^{[2]
X
Research source} The spikes are normally positioned towards the front since sprinters spend most of the race on their toes⁠; there is minimal cushioning in the heel area. Sprinting spikes are quite stiff, and also the lightest running shoe. ^{[3]
X
Research source}
- Sprinting spikes are best for 100, 200, and 400 meter events.
- 6mm spikes are best for track and field events and are the most versatile spike. Spikes come in many lengths, but spikes longer than 6mm are actually illegal on many tracks. ^{[4]
  X
  Research source}
2
Middle distance spikes have 6-8 spike holes. They are less rigid and contain more cushioning to provide support for longer distances, but are still fairly light. ^{[5]
X
Research source}
- Middle distance spikes are ideal for 800, 1500, 1600, and mile distances⁠—but can also be used for 400 and 2 mile events.
- They’re the best option if you’re not sure about what events you’re competing in, or if you compete in a wide range of events.
Advertisement
3
Long distance spikes usually have 4 spike holes. They’re made from more durable but heavier materials to hold up against the long distances, and can take on more force. ^{[6]
X
Research source}
- Long distance spikes are recommended for distances of 1500 meters to 10000 meters.
4
Cross country spikes use longer spike pins. They’re developed for running on uneven terrain, so they also provide more ankle support and a more secure fit. ^{[7]
X
Research source}
- 9mm spikes give a good grip for cross country running in muddy and wet conditions.
- You may want to go with 12-15mm spikes for very muddy conditions.

Part 2

Part 2 of 2:

Putting on the Spikes

Download Article

1
Find the spike holes in the upper sole of the shoe. When you turn the shoe over, you should see various metal holes, which is what the spikes twist into. ^{[8]
X
Research source}
- Remember that the number of spike holes varies depending on what kind of track spikes you have.
2
Unscrew any old spikes with your spike key or wrench. If you’re replacing worn down spikes, you’ll have to remove the old ones first. Align the spike key opening with the pointy end of the spike and twist to the left until the spike comes out of the hole. Repeat the unscrewing process for each remaining hole. ^{[9]
X
Research source}
- If your shoes are new, you won’t need to remove any old spikes.
- Make sure you unscrew every single old spike before you begin putting in the new ones.
The round, broader base of the spike should point away from you. ^{[10]
X
Research source}
Make sure it’s not crooked and that the circular edges line up completely. The spike should point outwards and away from the sole of the shoe. ^{[11]
X
Research source}
Twist the spike to the right to begin screwing it in. Keep twisting until the spike is completely screwed down, and you can’t tighten it any more. ^{[12]
X
Research source}
Make sure each spike is screwed in all the way down and that the spikes are flush and even with the sole of the shoe. Unscrew any spikes that are crooked or don’t line up evenly with the sole and rescrew them in. ^{[13]
X
Research source}
Hold the spike key in your dominant hand and grasp the shoe with your other hand. Push the base of the spike key firmly into the point of the spike and twist or spin it to the right to tighten the spike down completely. ^{[14]
X
Research source}
Blanks and studs are flat and are designed to cover the spike holes to keep out debris. This will allow you to still wear your track spikes even without the spikes. ^{[15]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Check the fit of your track shoes when buying them. In order to fully benefit from your track spike shoes, they should feel secure on your feet and close to the front of the shoe, but your toes shouldn’t actually touch the front. ^{[16]
X
Research source}

Thanks
Helpful 2 Not Helpful 0
Break in your track spikes before competing in them by doing a light workout or 2-3 strides. This will reduce the risk of injury ^{[17]
X
Research source}

Thanks
Helpful 2 Not Helpful 0
Bring extra spikes and your spike key with you to running events. That way, if you lose or wear down a spike, you can replace it as soon as possible. ^{[18]
X
Research source}

Thanks
Helpful 1 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You’ll Need

Track shoes (track spikes)
Spike key (spike wrench)

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

Log in

Running 101: How to Pick and Put Spikes on Track Shoes (Track Spikes)

Steps

Choosing Track Spikes

Putting on the Spikes

Expert Q&A

Tips

Things You’ll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories