Download Article
Download Article
When it rains, do your wipers leave streaks in just the wrong places on your windshield? Applying Rain-X properly to your windshield will almost certainly improve your ability to see through your windshield in any precipitation condition, especially at night. Use Rain-X and the water will bead and slide right off your windshield.
Steps
-
Wash your car normally. If you thoroughly clean and prep the windshield surface before applying, this step can be skipped. [1] X Research source
-
Dry your windshield. [2] X Research sourceAdvertisement
-
Apply Rain-x to half of the windshield at a time. Apply Rain-X with a soft cloth (preferably microfiber cloth), and in a circular motion, firmly apply Rain-X into the windshield.
-
Buff with a different clean cloth. Move up the windshield, gradually buffing out the haze, until you get to the top of the glass. [3] X Research source
-
Take a clean cloth and go over all the surfaces one last time, buffing in circles rubbing off the last residue. [4] X Research source
Advertisement
The Takeaway: Rain X Application
To apply the Rain X, spritz the product onto a soft (ideally microfiber) cloth and wipe down half of the windshield at a time using circular motions. Then, apply the Rain X to the other half of your windshield. Buff away any residue with a clean cloth.
Community Q&A
Search
-
QuestionWhat is the minimum application temperature?Community AnswerDirections on the bottle say the temperature should be above 40 degrees, and it should never be applied in direct sun. A heated garage would be perfect.
-
QuestionCan I pour Rain X into the windshield washer container under the hood?Community AnswerNo. Rain X has its own window washer fluid that can be purchased separately.
-
QuestionCan I apply it when it is hot outside?Community AnswerBuffing off takes some effort, so if it's too hot for you, then don't. It's best to work it in under some shade. Working with hot glass also makes the haze harder to remove.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Using your wipers does seem to slightly wear away the film of Rain-X.Thanks
- Applying Rain-X to your side and back windows can also help your general vision, and the ability to see your mirrors more clearly.Thanks
- When the Rain-X is applied in proper quantity, water will bead on the surface into perfect circles (as you look down on them). When the beads, or drops, of water take irregular shapes, it's a sign that the sheeting action is wearing off.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Though Rain-X may allow you to drive in the rain without using your wipers, always remember to turn your headlights on for safety.Thanks
- Read the product label for any warnings or precautions.Thanks
- Buffing the product off properly is very important because otherwise, you could leave a little haze of swirls in the glass, making it a harder to see out the windows and windshield. Proper buffing will restore the clarity of the glass.Thanks
- During a mist situation when you also are driving under streetlights, be sure to use your wipers normally. The water droplets sitting on your windshield can create quite a glare if they are not wiped away.Thanks
Advertisement
Things You'll Need
- Rain-X windshield treatment
- clean cloths
References
About This Article
Thanks to all authors for creating a page that has been read 208,856 times.
Reader Success Stories
- "It helped me decide that I won't need Rain X anymore, since it can't be used in the windshield washer reservoir. I've used it for about 25 years, but I'll now buy the other windshield wash that beads up." ..." more
Advertisement