Download Article
Download Article
Knowing how much water your pool will hold is the key to having the correct water chemistry, sizing pumps, filters, and more. If you want to be able to calculate your swimming pool volume in gallons, all you have to do is follow a simple formula that is derived from your pool's shape. If you want to know how to do it, just follow these steps.
Steps
-
Measure the length and width of the pool. If it's rectangle, just measure the longest side and the shortest side of the pool. If it's a square, just measure one of the sides of the pool -- all four sides of the square will have the same length. And if your pool is round, just measure the diameter of the pool, which is the longest path that can travel through the center of the circle, from one edge to the other. [1] X Research source
-
Measure the depth of your pool. This is the other dimension that is crucial to knowing the volume of your pool. If your pool has the same depth throughout -- most above ground pools are structured this way, for example -- then you'll just have to take one measurement from the top to the bottom of the pool. But if, like most pools, your pool has depth that gradually increases, then you'll have to measure the minimum depth (the shallow end) and the maximum depth (the deep end) of the pool.
Advertisement
-
Find the average depth of the pool. To do this, you need to write down the measurements of the deep end and the shallow end of the pool and divide the result by two. Let's say the shallow end of the pool measures 3 feet and the deep end measures 8 feet. (3 + 8)/2 = 5.5. The average depth of the pool is 5.5 feet. [2] X Research source
-
Multiply the result by the length and width of the pool. Now, just take this number and multiply it by the length and width of the pool. You're really just multiplying the area of the bottom of the pool by its depth. Let's say that the width of the pool is 20 feet and the length is 40 feet. So, 5.5 x 40 x 20 = 4,400 cubic feet. [3] X Research source
-
Convert the answer to gallons. To convert the answer to gallons, simply multiply the answer by 7.48. 4,400 x 7.48 = 32, 912 gallons of water. You're all done. [4] X Research source
Advertisement
-
Calculate the volume of the pool as if it were a cylinder. If you have a round pool that is of uniform depth, then all you have to do to find the volume is to treat it like a cylinder. To find the volume of a cylinder, all you have to do is find the area of the circular base times the height; this uses the formula V = πr 2 h. Let's say the pool's radius is 4.5 feet and its depth (height) is 4 feet. Plug those numbers into the formula to find the volume: V = π x 4.5 2 x 4 = 254.46 cubic feet. To convert this to gallons, simply multiply the result by 7.48. 254.46 x 7.48 = 1903 gallons. [5] X Research source
-
Use the shorthand formula for finding the volume of a round pool. For faster but slightly less accurate results, you can also plug the depth and diameter of the pool into the following formula: V = depth x diameter squared x 5.9 . Let's say we're working with the same circle that has a depth of 4 and a diameter of 9 (the same as having a radius of 4.5). The volume of this pool = 4 x 9 x 9 x 5.9 = 1,911 gallons. The result is slightly larger. [6] X Research source
-
Adjust the formula if your pool does not have the same depth. If your pool is shallower on one end and deeper on the other. just measure the minimum height and maximum height of the pool and divide them by 2 to get the average height, or the depth you should use in either formula. For example, if the pool has a minimum depth of 5 feet and a maximum depth of 10 feet, then you can add 5 + 10 to get 15, and divide 15 by 2 to get 7.5, the average depth of the pool. You can use this as the depth of the pool in either formula. [7] X Research source
Advertisement
-
Find the average depth of the pool. Simply find the minimum depth and the maximum depth of the pool and divide the result by 2. Let's say the shallow end of the pool measures 3 feet and the deep end measures 8 feet. (3 + 8)/2 = 5.5. The average depth of the pool is 5.5 feet.
-
Find the average width of the pool. Now, just find the average of all the widths of the pool by adding up the different widths and dividing by the amount of widths. Let's say you're working with a pool that has three widths: 20, 15, and 20. So, add them up and divide by 3. 20 + 15 + 20 = 55. 55/3 = 18.3 feet. The average width of the pool is 18.3 feet.
-
Find the length of the pool. Let's say the length of the pool is 40 feet.
-
Multiply the average depth, the average width, and the length of the pool. So, 5.5 feet x 18.3 feet x 40 feet = 4,026 cubic feet.
-
Multiply the result by 7.48 to get the answer in gallons. 4,026 cubic feet x 7.48 = 30,114 gallons.
Advertisement
Calculation Help
Community Q&A
Search
-
QuestionI have a round pool that measures 27' X 27' X4 1/2'. How much water do I have?Community AnswerFor an approximation, use pi x r-squared, or 13.5 x 13.5 x the value of pi (3.1416); this will be square feet. Multiply by 4.5 for cubic feet. To convert cubic feet to gallons: multiply by 7.48. This is just a quick conversion.
-
QuestionWhen is the best time to add chemicals, and how long does the filter need to run?Community AnswerSome chemicals are okay to swim in. Add acid and shock at night and let the filter run at least 8 hours. Do not go swimming after adding acid or shock for a minimum of 8 hours.
-
QuestionHow do I compute which pump to use in a swimming pool?Community Answer1 cubic foot of water contains 6.25 gallons. Measure the pool length and breadth, multiply together, then multiply buy the mean depth to calculate the volume. Then multiply volume x 6.25 for the number of gallons.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If your irregularly shaped pool can be divided easily into regular shapes, you can calculate the volume for each area, then add them together.Thanks
- Examples:
- Average depth (3’ to 8’ deep)
- 3 + 8 = 11
- 11 / 2 = 5.5
- Rectangle:
- Depth as in the example above
- Forty feet long, twenty feet wide
- 5.5 x 40 x 20 x 7.5 = 33,000 gal.
- Free Form:
- Depth as in the example above
- Thirty feet long, average 16 feet wide
- 5.5 x 30 x 16 x 7.5 = 19,800 gal.
- Round pool:
- Four feet deep, throughout
- Nine feet across
- 4 x 9 x 9 x 5.9 = 4 x 81 x 5.9 = 1,912 gal.
Thanks - Average depth (3’ to 8’ deep)
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If your pool is of extremely irregular shape, it would be wise to take as many evenly-spaced width measurements as you can stand, perhaps one width measurement for every foot of length.Thanks
Advertisement
Things You'll Need
- Measuring tape
- Calculator
- Pen and paper
- Someone to help with the measurements
References
- ↑ https://www.swimuniversity.com/pool-calculator/
- ↑ https://www.poolcalculator.com/pool-maintenance/swimming-pool-volume-calculator/
- ↑ https://www.poolandspa.com/page366.htm
- ↑ https://www.poolandspa.com/page366.htm
- ↑ https://www.poolandspa.com/page366.htm
- ↑ https://www.poolandspa.com/page366.htm
- ↑ https://www.poolandspa.com/page366.htm
About This Article
Article Summary
X
To calculate the volume of a rectangular swimming pool in gallons, start by measuring the length, width, and depth of your pool. If your pool has a shallow end and a deep end, find the average depth of the pool by adding the depth of both ends together and then dividing the results by 2. After you have the depth, width, and length, multiply these together to get the cubic feet of the pool. Finally, multiply this result by 7.48 to find the number of gallons. To learn how to calculate the number of gallons in a round pool, keep scrolling.
Did this summary help you?
Thanks to all authors for creating a page that has been read 595,272 times.
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
