Download Article
Simple, effective ways to sanitize & maintain your water dispenser
Download Article
Cleaning your water dispenser every 1 to 3 months, or whenever you change the bottle, is the best way to keep it working well and delivering fresh, bacteria-free water. [1] X Trustworthy Source State of Massachusetts Official website for the State of Massachusetts Go to source Fortunately, it’s easy to sanitize your water cooler with simple household products you likely already have at home. In this quick guide, we’ll show you how to disinfect the inside of your top or bottom-loading water cooler with bleach or vinegar, clean the exterior of your dispenser, and reinstall a new water bottle. Read on to learn how!
Things You Should Know
- Unplug the water dispenser, remove the water bottle, and drain any water in the reservoir. Then, lift off the no-spill guard and baffle.
- Add 1 tbsp (15 mL) of bleach into 1 gal (3.8 L) of water and fill the reservoir â…“ full with the solution. Scrub the reservoir and let the bleach sit for 10 minutes.
- Drain the solution into a bucket and then rinse the reservoir with water 2 to 3 times.
Steps
-
Pour 1 gallon (3.8 L) of water into a bucket. Whether you’re using a bleach or vinegar solution, start with a base of water. Simply get out a large bucket with a handle and pour in 1 gallon (3.8 L) of water. Using an easy-to-handle bucket helps prevent spills when you pour the solution into the water dispenser.
- Warning : Never mix bleach with vinegar or other household cleaners. The mixture can release a harmful gas that’s dangerous to breathe in. [2] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Add 1 tablespoon (15 mL) of chlorine bleach into the water. Put on a respirator mask and gloves to protect yourself against the bleach’s fumes and any spills. Then, pour 1 tablespoon (15 mL) of liquid chlorine bleach into the bucket with 1 gallon (3.8 L) of water. Mix the solution together gently. [3] X Research source- Use unscented bleach to help limit harsh smells and make flushing the bleach easier.
- Mix the solution in a well-ventilated area that can tolerate spills, such as your kitchen sink.
Advertisement -
Alternatively, pour 5 â…“ cup (1.3 L) of white vinegar into the water. [4] X Expert Source Melanie Garcia
Professional House Cleaner Expert Interview. 10 October 2019. If you don’t want to clean with bleach, distilled white vinegar is a less harsh alternative. Just mix in 1 part white vinegar for every 3 parts water, which is 5 â…“ cups (1.3 L) of vinegar for 1 gallon (3.8 L) of water. [5] X Research source- Note : While vinegar can kill some common germs and bacteria, it is not as effective as other disinfectants like chlorine bleach. [6] X Research source
- Vinegar is a great option if you are dealing with hard water and mineral deposits. [7] X Research source
- To reduce the scent of the vinegar, add 1 to 2 tablespoons (15-30 mL) of lemon juice to the solution.
Advertisement
-
Unplug the cooler, remove the water bottle, and drain the reservoir. To safely clean your water cooler, unplug it from the wall. Then, lift out the water bottle. Some water might remain in the reservoir after taking out the bottle, so lift up the cool tap (and any other taps your cooler has) to drain it into a bucket. [8] X Research source
- If your water cooler has a hot water tap, turn off the heater by flipping the switch on the back of the machine before you unplug it.
- If there are other electronics plugged into the outlet, unplug them too. This prevents any possibility, however small, of water meeting live electricity.
- Time your cleaning when the water bottle is empty, as this makes removing it easier.
-
2Lift out the no-spill guard and baffle inside the reservoir. If you have a top-loading water dispenser, look for a funnel-shaped no-spill guard that covers the top of your machine. Either align the arrows on the piece to remove it, or simply lift up on the notch. Then, reach into the exposed reservoir and lift out the disk-shaped baffle piece. [9] X Research source
- In a water cooler, a baffle is typically a plastic disc or pane that directs the flow of water.
- If you’re having trouble finding the no-spill guard and baffle, check your water cooler’s manual for their specific locations and removal instructions.
-
3Fill â…“ of the reservoir with your cleaning solution and scrub the inside. Pour your bleach or vinegar solution directly into the water reservoir until it’s about â…“ full. Then, use a sponge or scrub brush with a long handle to scrub the inside of the reservoir. This helps remove any stuck-on dirt or mineral deposits inside. [10] X Research source
- If you’re cleaning with bleach, wear gloves as you scrub to protect your hands from getting irritated.
- For bottom-loading dispensers : Set the water pump directly in the bucket of cleaning solution. Then, drain about half of the solution into a new bucket using the tap (or taps, if you have more than one). Let the remaining solution sit in the cooler. [11] X Research source
-
4Let the cleaning solution sit for 10 minutes and then drain it. Simply leave the cleaning solution in the reservoir for 10 minutes to let it work its disinfecting magic. Then, drain the solution through the tap and into a separate container. Dispose of the bleach or vinegar solution by pouring it down the sink or toilet. [12] X Research source
- If you have cool and hot taps, drain the solution using both to clean them out.
- For bottom-loading dispensers : Drain the rest of the remaining solution into a bucket using the tap (or taps). [13] X Research source
-
Rinse out the reservoir with water 2 to 3 times. To remove any traces of bleach or vinegar in your dispenser, fill the reservoir with fresh water. Then, drain it through the tap (or taps, if you have more than one) and into a bucket. Just repeat the rinsing process with fresh water about 2 to 3 times. [14] X Research source
- For bottom-loading dispensers : Fill a bucket with fresh water and insert the water pump. Then, drain the water through the taps. [15] X Research source
-
6Wash the no-spill guard and baffle with dish soap and reinstall them. Fill a bucket or your sink with warm water and several drops of liquid dish soap. Then, use a sponge to scrub the no-spill guard and baffle. Rinse off the soap with water and let the pieces air dry. [16] X Research source
- When the pieces are fully dry, reattach them to the water dispenser.
- If your no-spill guard has an air filter on it, do not get it wet. Simply lift off the small air filter piece before cleaning the guard. [17] X Research source
Advertisement
-
Scrub the drip tray with dish soap and replace it once dry. Simply lift off the drip tray below the water faucets. Then, fill a bucket or your sink with warm water and dish soap and scrub the tray with a sponge. Rinse the piece with water and let it air dry before returning the tray to the dispenser. [18] X Research source
- If the tray has a screen or grill underneath it, scrub it with soapy water, too.
-
2Clean the taps and outside of the dispenser with disinfecting wipes. The exterior of your water cooler gathers dust and germs that need to be cleaned off regularly, too. Just grab a disinfecting wipe and scrub the water faucet tap (or taps). Then, wipe down the top and sides of the dispenser. [19] X Research source
- Alternatively, wet a washcloth with warm water and dish soap and wipe down the tap and dispenser.
- Dust off the vents on the back of the dispenser with a duster, too.
-
Wash your hands and wipe the water bottle with your cleaning solution. Before you handle the new water bottle, wash your hands thoroughly for at least 20 seconds. Then, wet a soft washcloth with the remainder of your bleach or vinegar solution and use it to clean and disinfect the top and neck of the bottle. [20] X Research source
- If you don’t have any cleaning solution left, wipe the top and neck of the bottle with rubbing alcohol or disinfecting wipes.
- Use a clean towel to dry off the bottle after cleaning it.
-
Install the new bottle and check that the dispenser works. Remove the cap on top of the new bottle and place it on top of the dispenser. Tighten the bottle to ensure it fits snugly and watch for air bubbles rising to the top; this indicates that the bottle is sealed to the dispenser. Then, plug in the dispenser and fill a glass of water, sipping it to make sure there’s no unpleasant taste. [21] X Research source
- For bottom-loading dispensers : Take off the water bottle’s cap and insert the water pump. Push it down until the lid clicks in place and the pump reaches the bottom of the bottle. Then, place the bottle inside the bottle cabinet. [22] X Research source
- Test each faucet if your dispenser has more than 1 tap.
- If your water tastes funny, remove the bottle and flush the dispenser with water using the steps mentioned in the section above.
Advertisement
Community Q&A
Search
-
QuestionWill it be safe if there was black mold in the drain?Community AnswerBlack mold is a toxic mold. It can grow in houses and is extremely dangerous to humans. If you find any type of mold, you should not drink the water until you are 100% sure the water does not have any type of mold in it and have had the water tested.
-
QuestionHow do I remove a cap that is stuck in the water cooler?Community AnswerIf it's the little cap/plug that the piercing spike punches when you load in a bottle, the little cap floats to the top of the jug. It can't come out because it's larger than the hole. You do not need to worry about it.
-
QuestionWill cleaning the dispenser help the water taste better?Community AnswerDefinitely. If it doesn't, then you may have missed some grime. Do your best to get to all of the crevices for a fresh taste.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Wipe down the drip tray, faucet taps, and exterior of the water dispenser about once a week to prevent bacteria and mold from developing.Thanks
- If you don’t want to disinfect the dispenser with bleach or vinegar, use an anti-bacterial detergent. This might require more rinsing to thoroughly clean out any soap residue.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not touch the faucets with your hands to avoid contaminating other people’s drinking water.Thanks
- Don't keep bottled water for more than 30 days. Like other foodstuffs, bottled water can develop bacteria.Thanks
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about cleaning hacks, check out our in-depth interview with Melanie Garcia .
References
- ↑ https://www.mass.gov/guides/proper-care-of-bottled-water-and-dispensers-for-schools
- ↑ https://www.cdc.gov/hygiene/about/cleaning-and-disinfecting-with-bleach.html
- ↑ https://www.mountainspringswater.com/images/BWCCleaning.pdf
- ↑ Melanie Garcia. Professional House Cleaner. Expert Interview. 10 October 2019.
- ↑ https://www.northernhealth.ca/sites/northern_health/files/services/environmental-health/documents/guidelines-sanitising-bottled-water-coolers.pdf
- ↑ https://www.hsph.harvard.edu/nutritionsource/food-features/vinegar/
- ↑ https://pubs.nmsu.edu/_g/G304/
- ↑ https://www.water.com/files/nonbrand/equipmentdocs/Cleaning_100_Series.pdf
- ↑ https://www.water.com/files/nonbrand/equipmentdocs/Cleaning_100_Series.pdf
- ↑ https://youtu.be/u8ChFFngij0?t=218
- ↑ https://youtu.be/DAg7FIt7mso?t=15
- ↑ https://youtu.be/u8ChFFngij0?t=247
- ↑ https://youtu.be/DAg7FIt7mso?t=40
- ↑ https://www.northernhealth.ca/sites/northern_health/files/services/environmental-health/documents/guidelines-sanitising-bottled-water-coolers.pdf
- ↑ https://distillata.com/wp-content/uploads/2021/09/How-to-Clean-a-Bottom-Load-Water-Cooler-With-Vinegar-printable-directions.pdf
- ↑ https://www.water.com/files/nonbrand/equipmentdocs/Cleaning_100_Series.pdf
- ↑ https://www.mountainspringswater.com/images/BWCCleaning.pdf
- ↑ https://www.water.com/files/nonbrand/equipmentdocs/Cleaning_100_Series.pdf
- ↑ https://www.water.com/files/nonbrand/equipmentdocs/Cleaning_100_Series.pdf
- ↑ https://www.northernhealth.ca/sites/northern_health/files/services/environmental-health/documents/guidelines-sanitising-bottled-water-coolers.pdf
- ↑ https://www.northernhealth.ca/sites/northern_health/files/services/environmental-health/documents/guidelines-sanitising-bottled-water-coolers.pdf
- ↑ https://primowater.com/wp-content/uploads/2019/03/601118-Bottom-Loading-Dispenser-Self-cleaning-English.pdf
About This Article
Article Summary
X
To clean a water dispenser, unplug the cooler from the wall and remove the bottle. Use a sponge to wipe down the top of the water cooler. Then, mix 1 tablespoon of bleach into a gallon of water, and fill the inner reservoir of the cooler to the top with this mixture. Let it stand for 2-5 minutes before rinsing the water through the “cool” tap. Fill and rinse the reservoir 4 times with plain water to flush out the cleaning mixture. Clean the drip tray and replace the water bottle to finish cleaning the dispenser.
Did this summary help you?
Thanks to all authors for creating a page that has been read 580,443 times.
Reader Success Stories
- "It was very informative, and would help some of my colleagues in ensuring this process is completed where the dispensers are not sanitized by the service provider, but where the janitor is responsible. " ..." more
Advertisement
"It was very informative, and would help some of my colleagues in ensuring this process is completed where the dispensers are not sanitized by the service provider, but where the janitor is responsible. "
..."
more
"I did not know how to sanitize my water dispenser, and this definitely helped me! This is so simple to follow, thank you! "
..."
more
"The info was priceless: Learned that there are bacteria in my bottled water and the frequency to clean my dispenser!"
..."
more
"This was very helpful as I couldn't find the manual and I needed to find a proper way to sanitize the dispenser."
..."
more
"I read this to make sure I cleaned the bottled water cooler correctly, and I did. Thank you for this article. "
