PDF download Download Article PDF download Download Article

You can color water for all sorts of purposes, such as creating centerpieces or other decorations, making a fun drink, or setting up a water playstation for your kids. There are a wide range of synthetic, natural, or even homemade options you can turn to. On the other hand, if you’re trying to color a picture of water, you can create realistic-looking waves or droplets by adding highlights and shadows.

Method 1
Method 1 of 3:

Dyeing Water with Synthetic Coloring

PDF download Download Article
  1. Food coloring comes in a multitude of different colors, and can be found at grocery stores and discount stores. Adding a little bit of salt to the water first can prevent the food coloring from sinking to the bottom. [1]
    • Water-based liquid food coloring is easiest to find, but it produces more diluted colors. Liquid gel food coloring is a little more concentrated, and will make the final product more vibrant.
    • If you’re coloring water for a drink, don’t add too much food coloring. Some food dyes, especially red colors, can have a bad flavor if you use too much of them.
    • If you’re planning on putting flowers in your food coloring-dyed water, wait until the last minute to add them. Food coloring can start changing the flowers’ color within a couple of hours.
  2. Watermark wikiHow to Color Water
    A little bit goes a long way, so use a toothpick to grab a small amount of gel and swirl it around in the water. Add more if necessary until you achieve the color you’re looking for. Gel icing or paste dye can be found in grocery or cooking stores. [2]
    Advertisement
  3. Watermark wikiHow to Color Water
    Pick up a tiny bit of powder with a spoon and drop it in your water slowly. Blend in more dye, a little at a time, until you get the deep color you’re looking for.
    • Alternately, you can mix the powder with a couple of drops of clear alcohol to create a liquid dye, which can then be added dropwise to your water. [3]
  4. Watermark wikiHow to Color Water
    While wearing gloves, pop off the back of a highlighter and then remove the ink-soaked felt tube inside. Soak the tube in hot water for 4-6 hours, and then squeeze it into the water to get all the last bits of ink out. The water will look fluorescent on its own, and will glow under a blacklight!
    • Do not use this method if you want to drink the water or if your skin will be coming into contact with the water, as the highlighter ink might be toxic.
  5. Advertisement
Method 2
Method 2 of 3:

Coloring Water with Natural Dyes

PDF download Download Article
  1. Watermark wikiHow to Color Water
    These dyes are usually made from plants, and can be found in specialty stores or online. Their color is usually not as bright, so use these for a more subtle, understated option or for water that you want to drink or have your kids play with. [4]
  2. Watermark wikiHow to Color Water
    Find a fruit or vegetable that matches the color you’re looking for and juice it in a juicer or puree it in a blender. Strain the liquid, and then reduce it by heating it until most of the water is evaporated, which will leave you with a concentrated color. Add your homemade dye to water a few drops at a time until you get the hue you’re looking for. [5]
    • Strawberries or raspberries produce different shades of pink.
    • Tomatoes can give you a nice red color.
    • Leafy greens like spinach can be used to color water green.
    • Pureeing red cabbage and then adding a little bit of baking soda produces a blue color.
    • Blueberries, despite their name, can be used to make purple coloring.
    • Beetroot provides a reliable purple color.
  3. Watermark wikiHow to Color Water
    Buy a powdered fruit or vegetable, or use spices or drink mixes. Mix the powder directly into the liquid, or steep the powder by wrapping it in a coffee filter and letting it soak in warm water for a couple of hours until you get the color you’re looking for. [6]
    • Mix paprika into water to color it orange.
    • Steep saffron or turmeric to get yellow water.
    • Stir matcha or other powdered green tea into water to turn it green. You can also try steeping green tea leaves in warm water.
    • Add ground coffee or cocoa powder to water, or steep a tea bag in warm water, to color it brown.
    • Honey can be used to create watercolor paints that give colors ranging from delicate tints to dark, concentrated colors. [7]
    • Combine activated charcoal powder and water to get a black solution.
  4. Advertisement
Method 3
Method 3 of 3:

Drawing and Painting Water

PDF download Download Article
  1. Watermark wikiHow to Color Water
    Sketch out a circle or oval with a thin dark line, and fill it in with a blue or gray shade. Add a highlight on one side of the bubble by making a rectangle in a white or very light color. Make the rectangle slightly curved to match the shape of the bubble. [8]
    • Make the drops look 3-dimensional by using different colors when coloring in the drop. Use a darker shade in the area immediately surrounding the highlight, and a slightly lighter shade on the opposite side of the droplet. [9]
    • Blend all the colors within your drop to create a smooth, rounded shape, but give your rectangle highlight sharp edges. [10]
    • Add extra shading around the inner edges of the drop with a darker color, and give the drop a small shadow on its outside edge to complete the look. [11]
  2. Watermark wikiHow to Color Water
    Add a base color over the area where you want your water. Draw overlapping scalloped lines over the entire water area. [12]
    • Each of the lines should look like several connected semicircles. [13]
    • Make the wave shapes smaller and shallower for faraway waves, and bigger with more pronounced shadows for waves in the foreground. [14]
    • Add white on the crests of some of the bigger waves to create the appearance of sea foam, and use a darker shade to make shadows underneath the peaks of the waves to portray depth. [15]
  3. Watermark wikiHow to Color Water
    Use a flat brush and create broad, slightly diagonal strokes to create your wave shapes. Make the strokes closer together and more horizontal towards the horizon of your picture. Leave some white space in between your waves to create the look of shimmering or foamy waves. [16]
  4. Watermark wikiHow to Color Water
    Make a gradient-filled block of color over the area where you want your water to be, putting the darker shade towards the horizon. Use a brush tool with hard edges to create your squiggly wave shapes. [17]
    • Add highlights to the peaks of your waves with a softer brush in a slightly lighter color. Paint ocean spray and foam onto the tops of your waves with a white or light brush. [18]
  5. Watermark wikiHow to Color Water
    Water not only reflects white light, it mirrors other colors too. Your seascapes will look more realistic if you use other colors besides just blue shades.
    • For example, if you’re painting a seascape at sunset and the sky is orange, give the lighter highlights on the tops of your waves a slightly orange tint. [19]
  6. Watermark wikiHow to Color Water
    First, draw your object, such as a floating boat or a tree-lined shore. Next, lightly sketch an upside-down version of each object right beneath it. Add in wavy lines both overtop of the reflected object as well as in the surrounding water. [20]
    • Make the waves tighter together in the background, and farther apart in the foreground. [21]
    • Where the wave shapes cross into the outline of the reflected object, make them the same color as the original object. For example, if you are drawing a brown tree trunk reflected into the water, make the wave shapes blue outside of the reflected outline, and brown inside of it. [22]
  7. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Set up a color laboratory where your kids can experiment with pouring and mixing colored water. Add water and a little bit of non-toxic dye to some squeeze bottles, and let your kids have fun squirting the water out into bowls and ice cube trays and mixing different colors together! [23]
      • Try adding a drop or two of food coloring into a water balloon before you tie it up, or mix the dye into water inside of a balloon pumper, and use it to fill up water balloons. Have your kids pop the balloons in a play pool and watch the dyes mix to form new colors. [24]
      • If you’re making a centerpiece or other decoration, finish off your colored water by adding floating candles, plants or flowers. You could also add real or fake flowers to a vase with colored water.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about crafting, check out our in-depth interview with Diane Henkler .

      About This Article

      Article Summary X

      The easiest way to color water is with food coloring. Add a couple drops of liquid food coloring and stir it in. You can always add more drops for a more intense color, or mix different shades of dye together. Gel food coloring tends to create brighter, more vivid shades, while powdered dye will give you a darker result. If you want your water to have a neon glow, remove the felt core from a highlighter marker and soak it in the water for 4 to 6 hours. However, don’t do this if you plan to drink the water or use it in cooking! You can also use natural ingredients to dye your water, such as fruit juice, plant-based food coloring, or colorful spices like paprika, saffron, matcha, or turmeric.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 147,732 times.

      Did this article help you?

      Advertisement