PDF download Download Article
Set up your new router as an access point or range extender for an existing setup
PDF download Download Article

This wikiHow article will show you how to connect a new router to an existing network. This may come in handy when trying to expand the reach of your current network or when introducing a Wi-Fi access point where there currently isn't one. The process can seem overwhelming at first, but we've broken it down to make your handiwork as simple and smooth as possible!

Quick Steps

  1. Plug the new router into power and make sure your new router's WAN is not already configured.
  2. Connect the new router to your current network with an ethernet cable.
  3. Log into your router and assign it to the same IP as your current network.
  4. Finish setting up your router.
  1. You will need the router turned on to modify its settings in future steps.
  2. With your new router in hand, make sure its wireless Wide Area Network, or WAN, connection is on its default setting, indicating that it is unconfigured. [1]
    • "WAN" refers to a wide area network, a telecommunications network that extends over a large geographic area. Every router has both a WAN and a LAN (local area network) connection. [2]
    Advertisement
  3. Your existing network should already have an access point (either another router or a wireless access point device). These are typically small boxes around which the rest of your networking devices revolve. [3] Connect it to your router by running an Ethernet cable from one to the other.
  4. You can log into your router a few different ways:
    • a mobile app if your ISP provides one.
    • going to your router's IP address in your browser, which is usually "https://192.168.1.1" , "https://192.168.0.1" , or "https://192.168.2.1" .
    • The username and password are usually located on a sticker on your router. If you changed and forgot them, you can easily reset them .
  5. Make sure it doesn't conflict with the existing DHCP (a separate network management protocol that automatically assigns IP addresses to partner devices).
    • For two IP addresses to exist in the same subnet, they must share the same network number. Only the identifier at the end of the address differs. So, 192.168.1.1 and 192.168.1.2 would both exist within the same subnet. [4]
    • The IP address must also not conflict with that of any other devices connected to the network, such as a printer or a desktop.
  6. Every router will have slightly different setup instructions. From here, simply complete the setup of your new router before continuing.
    • If your initial router/access point is also wireless, use a different SSID for your new router.
    • Be sure to disable DHCP on this new router as well. You only need DHCP enabled on the primary access point.
    • A light should activate on both your access point and router, indicating a connection between the two.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I set up my new router's Wi-Fi so it automatically connects to both of my routers?
    Steven Racz
    Audio, Video, & Automation Expert
    Steven Racz is an Audio, Video, & Automation Expert and Owner at Altitude Audio Video based in Littleton, Colorado. With over 15 years of professional experience, Steven and his team of technicians specialize in installing residential and commercial audio systems, theater design and installation, Josh Ai voice & control systems, and Control4 automation. At Altitude Audio Video, they strive to tailor the perfect system for your needs.
    Audio, Video, & Automation Expert
    Expert Answer
    The easiest thing that you can do is use the same access point or Wi-Fi name and password as your original router.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about dealing with routers, check out our in-depth interview with Steven Racz .

      About This Article

      Thanks to all authors for creating a page that has been read 58,596 times.

      Is this article up to date?

      Advertisement