Download Article
Try these methods to fix the DRIVER_POWER_STATE_FAILURE blue screen of death error
Download Article
- What causes the error? |
- Before You Get Started |
- Remove USB Storage Devices |
- Uninstall Recent Software |
- Turn Off Power Saving |
- Turn Off Fast Startup |
- Reinstall New Device Drivers |
- Roll Back Device Drivers |
- Update Drivers |
- Run Windows Repair Tools |
- Use a System Restore Point |
- Reinstall Windows
Have you gotten a blue screen of death (BSOD) that says "driver power state failure"? This error occurs when a driver on your PC ends up going to sleep or stops working while you're still using the computer. According to Microsoft, "Windows flags a Driver Power State Failure error when the device doesn't respond in time (or at all) to the wake signal Windows sends to the device." Don't worry, you can usually get your computer working again by rolling back your drivers or removing USB storage devices, and we've gathered a number of methods below to fix this error.
Things You Should Know
- USB drives are the most common cause of this error.
- Back up your PC before you begin in case anything goes wrong.
- Updating, rolling back, or reinstalling your drivers may help fix the problem.
- If nothing else works, reinstalling Windows can solve this issue.
Steps
Section 2 of 12:
Before You Get Started
-
Restart your PC in Safe Mode. After a BSOD, it's best to restart your PC in Safe Mode. Safe Mode boots your computer in a very basic state to help identify problems with Windows. [1] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Make a backup of your PC. While unlikely, it's good idea to back up your PC in case something goes wrong. This way, if something does go awry, you have the ability to roll your PC back to where you started.
- If you already have a recent backup of your PC, especially if it was made before the BSOD error, you can skip this step.
- Warning: There's a chance that you might not be able to complete a backup depending on the error.
Advertisement
Section 4 of 12:
Uninstall Recent Software
-
Remove any recently installed software. New software could be the culprit of the error. If the new software isn't compatible with your system, it could cause the DRIVER_POWER_STATE_FAILURE error. If you installed new software shortly before the BSOD errors started, it could be the reason you are getting the error.
-
Right click the Start button. Select Apps and Features on Windows 10 and Installed apps on Windows 11. [2] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Sort your installed applications by date. Near the top of the screen you will see some filtering options for your installed apps. By default the list will be sorted by Name (A to Z) but you should select Date Installed instead.
-
Uninstall problem applications. If you have any newly installed software that you believe could be causing the BSOD, uninstall it by selecting the application and clicking Uninstall , then clicking Uninstall again on the new pop up.
-
Restart your PC. After following the uninstallation instructions on screen, restart your PC to see if you still encounter the DRIVER_POWER_STATE_FAILURE error.
Advertisement
Section 5 of 12:
Turn Off Power Saving
-
Navigate to Hardware and Sound. Click the Power Options heading.
-
Click "Change plan settings" next to your active power plan.
-
Select "Change advanced power settings".
-
Expand the "PCI Express" or "Graphics Settings" option. Then expand Link State Power Management and change the settings to Maximum performance .
- If your dropdown doesn't list a Maximum performance option you can select Off instead.
Advertisement
Section 6 of 12:
Turn Off Fast Startup
-
Open up the Control Panel . Fast Startup helps your PC boot quicker. However, this may cause Windows to not boot correctly, which can lead to the DRIVER_POWER_STATE_FAILURE error.
-
Navigate to Hardware and Sound. Click the Power Options heading.
-
On the left-hand side, select "Choose what the power buttons do".
-
Select "Change settings that are currently unavailable" near the top. As this is an administrator function it may prompt you to put in an administrator password.
-
Uncheck "Turn on fast startup (recommended)". This option should be midway down the page. Save your changes once you've unchecked this option.
Advertisement
Section 7 of 12:
Reinstall New Device Drivers
-
Boot your PC in Safe Mode. New USB devices usually install drivers once they are plugged in. If the device drivers were not installed correctly, they could cause issues and lead to the driver power state failure error.
-
Right click the Start button and select Device Manager.
-
Look for a device with a yellow exclamation mark. Expand the different categories until you've located a device that has a small yellow exclamation mark icon next to it.
-
Right click this device and select Uninstall .
-
On the top ribbon, click "Scan for hardware changes." This button looks like a blue computer monitor with a blue magnifying glass over it, and is on the far right on the ribbon. This will force the computer to reinstall the device drivers.
-
After the driver is reinstalled, check the device again. Navigate back to the device in the Device Manager and see if it is still showing a yellow exclamation point.
Advertisement
Section 8 of 12:
Roll Back Device Drivers
-
Boot in Safe Mode. A driver update could have caused it to stop working properly. In order to diagnose if this is the culprit, you can undo any recent driver updates.
- If reinstalling a device driver does not fix the error, you should try the steps below to roll back the driver to a previous version that worked for you in the past.
-
Right-click the Start button and select Device Manager.
-
Find a device with a yellow exclamation mark. You'll probably need to expand the categories until you find it. Right-click this device and select Properties .
- The exclamation mark means something has gone wrong with this device.
-
In the properties window, select the Driver tab. In this tab, select the Rollback driver option if it is visible.
Advertisement
Section 9 of 12:
Update Drivers
-
Boot in Safe Mode. Updating certain device drivers may fix the issue. If you aren't seeing any device issues, you may want to try updating your Network and Display Adapter device drivers. [3] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Right click the Start button and select Device Manager.
-
Expand Network Adapters and Display Adapters.
-
Right click each device and select "Update driver". After the drivers have been updated, restart your PC to see if the error still occurs.
Advertisement
Section 10 of 12:
Run Windows Repair Tools
-
Use DISM and SFC to try and repair your computer. Windows has two built-in repair commands, Windows Deployment Image Servicing and Management (DISM) and Windows System File Checker (SFC). [4] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Open up the Command Prompt. Type Command Prompt into the taskbar search bar and open up the Command Prompt app.
-
Run the following commands. You can run both of these tools but Windows recommends running DISM first.
- DISM : Dism /online /cleanup-image /restorehealth
- SFC : SFC /scannow
- Press Enter after typing each command to run it.
- Warning: Keep in mind that SFC/scannow might take a while to run.
-
Restart your PC. After the commands have finished running, restart your computer to see if the error has been resolved.
Advertisement
Section 11 of 12:
Use a System Restore Point
-
1Restore to a previous System Restore point. If nothing else has worked, restoring your computer can bring it back to before the error started occuring. Your system may have made a restore point before the BSOD started to occur. [5] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
2Open the System Restore menu. In the taskbar search bar type Recovery, and open the control panel option Recovery from the menu.
-
3Select "Open System Restore".
-
4Pick a restore point from the list. If you've made previous restore points you should see them here, or you can select one that your computer created.
-
5Allow the computer to restore itself. Once the restoration process is complete, your computer should restart to the loaded restore point.
Advertisement
Section 12 of 12:
Reinstall Windows
-
1Reinstall Windows if no other method has worked. This is a last resort, but if nothing else fixes the DRIVER_POWER_STATE_FAILURE error, you may want to consider this option . [6] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
2Restart your PC and hold F8 when the boot screen is visible. This will take you to the Windows Recovery Environment.
- Some devices may require you to hold down Fn+F8 instead of just F8 .
-
3Navigate to Troubleshoot > Reset this PC. Select to either keep your files or remove everything and follow the on-screen instructions to refresh your Windows installation.
-
4Wait for the process to finish. Once your computer has finished reinstalling your operating system, you should be able to get back into your PC without the error loop occurring.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://support.microsoft.com/en-us/windows/windows-startup-settings-including-safe-mode-7f31dcea-6427-0ba0-ec1b-729a56321cd3
- ↑ https://support.microsoft.com/en-us/windows/uninstall-or-remove-apps-and-programs-in-windows-4b55f974-2cc6-2d2b-d092-5905080eaf98
- ↑ https://support.microsoft.com/en-us/windows/update-drivers-manually-in-windows-ec62f46c-ff14-c91d-eead-d7126dc1f7b6
- ↑ https://support.microsoft.com/en-us/windows/using-system-file-checker-in-windows-365e0031-36b1-6031-f804-8fd86e0ef4ca
- ↑ https://support.microsoft.com/en-us/windows/create-a-system-restore-point-77e02e2a-3298-c869-9974-ef5658ea3be9
- ↑ https://support.microsoft.com/en-us/windows/reinstall-windows-d8369486-3e33-7d9c-dccc-859e2b022fc7
About This Article
Thanks to all authors for creating a page that has been read 15,260 times.
Advertisement