Try These 12 Easy Ways to Fix Video Scheduler Internal Error

PDF download Download Article
Learn how to fix this annoying blue screen of death error
PDF download Download Article

Are you getting a blue screen of death (BSOD) that says "Video Scheduler Internal Error"? This is a frustrating error, especially because the error code doesn't explain much about what's causing the crash. This error is usually caused by your GPU and/or GPU drivers, though it can also be due to your BIOS settings, RAM, or that your computer is overheating. In this article, we go over several ways to fix "Video Scheduler Internal Error" on your Windows PC.

Ways to Fix Video Scheduler Internal Error

First, try clearing out any custom BIOS settings by removing the CMOS battery from your motherboard and then putting it back in. You should also check your PCIe settings in BIOS if you're using an older riser cable. Otherwise, try updating or reinstalling your GPU drivers.

1

Clear your CMOS.

PDF download Download Article
  1. Sometimes, custom BIOS settings can interfere with new hardware when you install it. The best and easiest way to fix this is to remove the CMOS battery to clear out those custom settings, then put it back into your mobo.
    • Locate the coin battery on your motherboard.
    • Remove the battery using the latch, and leave it out of the motherboard for a few seconds.
    • Place the CMOS battery back in the motherboard.
    2. Advertisement
2

Check your PCIe settings.

PDF download Download Article
  1. If you're using a 3.0 riser cable, you may be encountering this error because your GPU'S PCIe slot is set to auto or Gen 4. You can fix this by going to your BIOS settings:
    • Restart your PC. Once you see the splash screen for your motherboard, press the BIOS access key. This key varies depending on what motherboard you have. Some popular mobo manufacturers and their BIOS access keys are listed below:
      • ASUS: Delete or F2
      • ASRock: Delete or F2
      • EVGA: Delete or F2
      • Gigabyte: Delete or F2
      • MSI: Delete
    • Go to the Advanced tab.
    • Locate your device configurations. The exact layout and location of these settings will vary depending on the brand of your motherboard.
    • Change your GPU'S PCIe mode to Gen 3 . Your GPU is installed in a PCIe x16 slot, so look for a device named PCIEX16_1 (though the last number may be different, depending on how your motherboard is set up).
3

Run the BSOD Troubleshooter.

PDF download Download Article
  1. Windows has a number of built-in troubleshooters to help you figure out why certain things are happening on your computer. One of these troubleshooters can help you with BSOD (or blue screen of death) errors. [1]
    • In the taskbar search bar, type "Get help".
    • Open the Get Help application.
    • In the Get Help app, search for "Troubleshoot blue screen error".
    • Click on Troubleshoot blue screen error .
    • Go through the troubleshooter to identify the issue, then follow the on-screen steps to fix the problem.
    2. Advertisement
4

Reseat your RAM.

PDF download Download Article
  1. If you've recently replaced or removed your RAM sticks from your motherboard, ensure the current RAM sticks are seated properly. If your RAM isn't seated in the motherboard fully, your computer won't be able to use it as it needs to, which can lead to issues and the Video Scheduler Internal Error.
    • Lower the latches that hold your RAM sticks in place.
    • Remove each RAM stick by pulling firmly, but never forcing it out.
    • Place each RAM stick back into place by pressing it straight down into the RAM slot. Press until you hear a click and the lever has moved up to the locked position. However, never force the RAM to go into the slot, as this could damage the parts.
5

Reseat your GPU.

PDF download Download Article
  1. Similarly to the RAM, if your GPU was recently replaced or removed, you'll want to ensure it's seated properly. If the GPU isn't seated correctly, your computer may run into errors, especially when trying to watch a video or play a game.
    • Unscrew any screws holding your GPU into place.
    • Remove the GPU by pulling firmly, but never forcing it out.
    • Replace the GPU by pressing it straight down in the GPU PCIe slot. Make sure to press firmly until the GPU is fully inserted into the slot, but never force it, as you could damage the parts.
    2. Advertisement
6

Update your GPU drivers.

PDF download Download Article
  1. While this BSOD error usually is due to hardware issues, it can sometimes be caused by a bad driver. [2] If a bad driver is the case, you can update your drivers using these steps:
    • Boot in Safe Mode. To do this, press and hold the ⇧ Shift key while on the Windows sign-in screen, then select Power > Restart .
    • Right click the Start button and select Device Manager .
    • Expand Network Adapters and Display Adapters .
    • Right click each device and select Update driver . After the drivers have been updated, restart your PC to see if the error still occurs.
7

Reinstall GPU drivers.

PDF download Download Article
  1. Sometimes, new GPU drivers can have bugs that cause crashes, or your drivers might not have been installed correctly and are now corrupted. The best way to fix this is to use DDU to uninstall your drivers and then reinstall them from your GPU's website.
    • Download DDU (Display Driver Uninstaller).
    • Restart your computer in Safe Mode. To do this, press and hold the ⇧ Shift key while on the Windows sign-in screen, then select Power > Restart .
    • Navigate to where you downloaded DDU and run it.
    • Follow the on-screen instructions to uninstall your GPU drivers. DDU will restart your PC once it's done uninstalling the drivers.
    • Go to your GPU manufacturer's website and download your desired driver. You can try the newest driver, or you may want to go back one or two versions if you're concerned that the newest driver is causing the error.
    • Install the drivers once they are finished downloading, following all on-screen instructions.
    2. Advertisement
8

Clean your computer's fans.

PDF download Download Article
  1. Some users have found that the Video Scheduler Internal Error is occurring because their computer is overheating . The easiest way to fix this is to clean out the inside of your computer, especially the fans that push and pull air in and out of the case.
    • Open your computer's case. If you have a desktop, unscrew the thumbscrews holding on the right side plate and remove the side. If you have a laptop, you may be able to clean the fans without opening the case, but you can also use a screwdriver to remove the bottom of your laptop.
      • Each laptop will be built slightly differently. The bottom of your laptop may not be easily removed.
    • Using compressed air, remove any dust that's stuck to the computer's fans or interior. If there's a lot of thick dust, you may want to use the hose attachment on a vacuum to quickly and easily remove the dust.
      • If you blow a lot of dust out of the fans, don't leave the dust inside your case. Brush it out using your hands, a duster, or a brush. You can also use the hose attachment of a vacuum to get it out of the case.
9

Check your cooling system.

PDF download Download Article
  1. If your cooling system (case fans and CPU heatsink) isn't working properly, this can contribute to your computer overheating, which can lead to the Video Scheduler Internal Error. Make sure all of your fans are working, and if not make sure they're plugged into your motherboard fully. Also, make sure your CPU heatsink is seated properly on top of the CPU.
    2. Advertisement
10

Reapply thermal paste.

PDF download Download Article
  1. If you use too much or too little thermal paste , it can cause the CPU to overheat, which can lead to this error. If you removed your heatsink for any reason and had to put on thermal paste, check to make sure you put the correct amount.
    • To remove thermal paste , use rubbing alcohol and a tissue or cotton swab to remove it all. Let the CPU and heatsink dry. Then, place a pea-sized drop of thermal paste in the center of the CPU and place the heatsink on top before screwing it back in. [3]
    • If you're on a laptop, you may not be able to access your CPU easily. If this is the case, you may need to bring your computer to a repair technician.
11

Revert back to old hardware.

PDF download Download Article
  1. Sometimes, updating hardware can cause the Video Scheduler Internal Error to occur. If you recently upgraded your GPU or RAM, try putting your old GPU or RAM back in your computer to see if that fixes the error (if you still have them and if they're still working). If this fixes the problem, you may need to try reseating your RAM or GPU when putting your new hardware back in.
    2. Advertisement
12

Update your BIOS.

PDF download Download Article
  1. If nothing else works, try updating your BIOS. Updating the BIOS manually can be tricky, and it can cause your computer to stop working if something goes wrong in the process. If you're not confident in updating the BIOS yourself, bring your computer to a computer repair shop and ask for assistance.
    • Check your BIOS version if you can access your computer. If you can't get onto your computer, skip to the next step.
      • Search for msinfo in the taskbar search bar.
      • Click System Information .
      • Note down what it says your BIOS Version is.
      • Go to your motherboard manufacturer's website and find the latest firmware version for your motherboard. If your BIOS is outdated, continue with the next step.
    • Download the latest BIOS firmware version. If you can't access your computer, you'll need to do this on a different computer.
    • Put the BIOS firmware update on a USB drive. If you're doing this on your own computer, you can leave the drive inserted. If you're doing this on another computer, eject the drive once the update file copies over, then insert it into your computer.
    • Restart your computer. If your computer was already turned off, you can turn it on.
    • Press the BIOS/UEFI button. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo on the screen. The button to open the BIOS/UEFI for the most popular motherboard brands are listed below, but check your motherboard manual for specifics:
      • ASUS: Delete or F2
      • ASRock: Delete or F2
      • EVGA: Delete or F2
      • Gigabyte: Delete or F2
      • MSI: Delete
    • Update your BIOS. How you install the update varies between motherboard manufacturers, but you should see an option to Update BIOS from Drive (or something similar). You may have to go to the Boot menu first.
      • Once the update is complete, restart your computer if it doesn't automatically restart.

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      9 Ways to Fix "System Thread Exception Not Handled" Windows Error
      How to
      Fix "WHEA Uncorrectable Error" on Windows 10/11
      How to
      Resolve the “Your Device Ran Into a Problem” Blue Screen Error
      8 Ways to Fix the UNEXPECTED KERNEL MODE TRAP BSOD
      10 Ways to Fix the Driver Power State Failure Error on Windows
      13 Ways to Fix "KMODE Exception Not Handled" on Windows 10/11
      How to
      Resolve PFN_LIST_CORRUPT: Drivers, Hardware, and More
      How to
      Fix the Blue Screen of Death on Windows
      How to
      Tell if Your GPU is Dying
      DPC Watchdog Violation: Common Causes & Fixes
      What to Do When You Get a Kernel Security Check Failure BSOD
      How to
      Fix a Graphics Card
      How to
      Identify and Resolve Hardware Failure Issues
      What Does "Start PXE over IPv6" Mean? Causes & Fixes Guide
      Advertisement

      References

      1. ↑ https://support.microsoft.com/en-us/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6
      2. ↑ https://answers.microsoft.com/en-us/windows/forum/all/unexpected-kernel-mode-trap-bsod-windows-10/f5db96ec-5bca-4c94-97dd-6ccfc378de60
      3. ↑ https://www.intel.com/content/www/us/en/gaming/resources/how-to-apply-thermal-paste.html

      About This Article

      Thanks to all authors for creating a page that has been read 534 times.

      Is this article up to date?

      Advertisement