Download Article
Download Article
You can use acrylic paint to dye your light-colored wig without damaging its fibers. A little bit of acrylic mixed with rubbing alcohol makes an effective dye that will leave your wig looking vibrant and new. Use a spray bottle to quickly and easily apply the paint to your wig. Make sure you have a comb on hand to keep your wig from getting tangled!
Steps
-
Find a light-colored synthetic wig. Acrylic paint won’t show up on wigs that are dark. Go with a wig that’s blonde, white, silver, or pastel. Acrylic paint also won't damage the fibres of a synthetic wig. [1] X Research source- Don’t try bleaching a synthetic wig so you can dye it with paint. Bleaching will destroy the synthetic fibers in the wig.
- Natural hair wigs should be dyed with real hair dye, not acrylic paint.
-
Use a cheap wig if it's your first time dyeing with acrylic paint. You don't want to accidentally ruin an expensive wig. If you're set on dyeing an expensive wig, test the dye on the tips of the wig hairs first. If you don't like how it looks, just cut the ends off the wig. [2] X Research source
Advertisement
-
Work in a well-ventilated area. Work outside if possible. If you have to work inside, open any windows in the room and set up a box fan to blow the paint fumes out of the windows. -
Lay down a tarp so paint doesn’t get on the floor. You can also use newspaper or an old sheet if you don't have a tarp. Center the table or stand you'll be working on over the tarp. -
Place a foam head on your work table. Find a foam head online or at your local beauty supply store. If you can't get a foam head, use something you have around the house, like a paper towel holder or a large mixing bowl flipped upside down. Keep in mind that whatever you use will get paint on it. -
Add a ¼ teaspoon (1.23 mL) of acrylic paint to a small spray bottle. If you’re dyeing a long wig with a lot of hair, you may want to use a ½ teaspoon (2.46 mL) of paint. Squeeze the paint directly into the spray bottle, or use a brush to transfer the paint into the bottle. [3] X Research source -
Pour 3 tablespoons (44.36 mL) of rubbing alcohol into the spray bottle. The more rubbing alcohol you use, the less opaque the color will be on your wig. If you want your wig to have a vibrant, saturated color, use 2 tablespoons (29.57 mL) of rubbing alcohol instead. For a lighter, more translucent color, use 4 tablespoons (59.14 mL). [4] X Research source -
Put the top on the spray bottle and shake the bottle to mix up the dye. Keep shaking the bottle vigorously until the paint and rubbing alcohol are completely mixed. [5] X Research source
Advertisement
-
Put on latex gloves so you don’t get paint on your hands. You'll be using your hands to work the paint into the wig, and acrylic paint can stain skin. [6] X Research source -
Spray paint onto a section of the wig, holding the bottle 6 inches (15.24 cm) away. Spray the section of the wig a few times until there’s a good amount of paint on it. The section should be fully saturated with paint. [7] X Research source -
Use your fingers to comb the paint through the wig hairs. Make sure you’re getting the paint on the hair underneath and not just on the surface of the wig. Use your fingers to rub the paint into the roots of the hair as well. Spray on more paint as needed until the entire section of hair is covered. [8] X Research source -
Keep applying paint to sections of the wig until the entire wig is covered. Carefully inspect the wig and look for any spots you missed. Double check the roots. Make sure the tips of the wig hairs are all covered with paint.- Flip the wig upside down so it’s easier to check the hairs underneath.
- Use an old comb to comb the paint through the wig hairs to help cover any spots you missed.
Advertisement
-
Let your wig air dry for 1-2 hours. A lot of paint will drip off the wig while it’s drying, so make sure you leave it over a tarp. Check back on your wig after 1 hour. Run your fingers through it; if the paint comes off on them, let it dry for another hour. [9] X Research source -
Rinse your wig under cold water. Don’t worry if you see paint washing out, that’s normal. Keep rinsing until the water runs clear. [10] X Research source- Make sure you take the time to rinse out all the extra paint from your wig. You don’t want paint getting on your face or clothes when you wear it!
-
Let the wig dry on a towel for 1-2 hours. Flip the wig over halfway through the drying process to air out the other side. [11] X Research source -
Brush out the wig. Put the wig on a foam head if you have one so it's easier to brush out. Gently run a brush or comb from the roots of your wig to the tips. When you’re finished, your wig should be knot and tangle-free. Now your wig is ready to wear! [12] X Research source
Advertisement
Community Q&A
Search
-
QuestionI have a black wig and I want to dye it white. Is it possible to do this method using white acrylic paint to dye my black wig?Community AnswerNo. You'll end up with a gross gray colored wig. You might have some success if you dye it over and over again, but your best bet is to just buy a white wig.
-
QuestionWill the acrylic paint wash out and does it come in a lot of colors?Community AnswerYes. acrylic paint can be washed out with some effort, and it comes in a variety of colors.
-
QuestionWill this method also work for glow-in-the-dark paint?Community AnswerYes.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Light-colored wig
- Acrylic paint
- Rubbing alcohol
- Small spray bottle
- Latex gloves
- Tarp
- Foam head
- Comb
- Towel
References
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=41
- ↑ https://www.hairlossexpert.co.uk/how-dye-your-wig.html
- ↑ https://www.youtube.com/watch?v=AtsSdrq2Ek8&feature=youtu.be&t=9
- ↑ https://www.youtube.com/watch?v=AtsSdrq2Ek8&feature=youtu.be&t=36
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=100
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=110
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=113
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=113
- ↑ https://www.youtube.com/watch?v=ZvuLYTi3peg&feature=youtu.be&t=273
About This Article
Article Summary
X
You can use acrylic paint to dye your light-colored synthetic wig without damaging the fibers. You'll need a few simple things to get started, like a foam head to put your wig on, a tarp to protect your floors or work station, paint, latex gloves, and rubbing alcohol. After you set up your wig in a well-ventilated area, you can mix your paint with the rubbing alcohol in a spray bottle. You'll want to saturate one section at a time with this mixture, using your fingers to comb it through the wig hairs. Once the wig is covered, you'll need to let it dry before rinsing it under cold water to set the color. To learn how to pick a wig, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 241,439 times.
Reader Success Stories
- "For Halloween, I was looking forward to being my favorite pop star and have a two-toned wig. I looked all over the internet and couldn't find the color I wanted. Now I can dye my wig!" ..." more
Advertisement
90%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"For Halloween, I was looking forward to being my favorite pop star and have a two-toned wig. I looked all over the internet and couldn't find the color I wanted. Now I can dye my wig!"
..."
more
