Download Article
Get your synthetic wig sleek and shiny with our helpful guide
Download Article
Almost any wig can be straightened, but wigs made from synthetic fibers require more care. [1]
X
Expert Source
Nikia Londy
Hair Augmentation Specialist
Expert Interview. 7 October 2021.
Because the fibers are made from plastic, they are sensitive to high temperatures and cannot be straightened with a hair straightener. The one exception to this are wigs made from heat-resistant fibers. This article will show you three simple ways of straightening a synthetic fiber wig. It will also show you how to straighten a wig made from heat-resistant synthetic fibers.
Things You Should Know
- Secure the wig on a styrofoam head with sewing or T-pins. Then, detangle the wig using a wide-toothed comb.
- Put the wig in the bathroom and run hot water in the shower until the room is steamy. Then, gently comb out the hair again using a wide-toothed comb.
- Remove the wig from the bathroom once condensation starts to form and transfer it to a cool, dry space.
Steps
-
Get a Styrofoam wig head. You can buy them in costume shops, well-stocked arts and crafts shops, wig shops, and in certain beauty supply shops. You can also buy them online. They look like a human head, complete with a neck, except that they are made out of white Styrofoam.
-
Put the wig head on a secure stand so the fibers can hang loosely. [2] X Expert Source Nikia Londy
Hair Augmentation Specialist Expert Interview. 7 October 2021. You can buy a wig stand online or from a wig shop. You can also make own by sticking a wooden dowel into a wooden base with a hole drilled into the middle of it. Here are some other options for wig stands:- A toilet plunger will work well for short and medium-length wigs.
- A soda bottle filled with water, sand, or rocks will work for short wigs.
- A camera tripod will allow you to rotate the wig head to any angle.
Advertisement -
Place your wig over the wig head and secure it with pins. Push a pin right through the top of the head, at the temples, along the sides, and at the nape. You can use either sewing pins or T-pins.
-
De-tangle your wig with a wide toothed comb or a wire wig brush. Gently run the comb or brush through the fibers. Work in small sections, and start from the ends first. Work your way up to the top. Never brush a wig straight down from the roots to the ends.
- Never use your personal hairbrush. The oils from your hair will damage the fibers.
- Do not use a regular hairbrush. This includes boar bristle and paddle brushes. This can also damage the fibers and mar the finish.
Advertisement
-
Gently run a wide-toothed comb through your wig to get rid of any tangles. Once you get your wig wet, you will not be able to brush it again until the fibers dry. Brushing a wet wig can lead to frizz and damaged fibers.
-
Place a pot of water on the stove and clip a thermometer to the side. You will need to boil your water to a specific temperature range. Also, try to use the largest pot you can find so that you will have enough water to pour over your wig. The longer your wig is, the larger pot you will need.
-
Heat the water to 160°F to 180°F. [3] X Expert Source Nikia Londy
Hair Augmentation Specialist Expert Interview. 7 October 2021. This is very important. If the water is not hot enough, the wig won't straighten. If the water is too hot, the fibers may melt. -
Pour the hot water over the wig. [4] X Expert Source Nikia Londy
Hair Augmentation Specialist Expert Interview. 7 October 2021.- If you have a very long wig, consider dipping the entire wig (still on the wig head) into the pot for 10 to 15 seconds, then pulling the wig out. Place the wig head back onto its stand.
-
Do not brush the wig. If you see some tangles, you can gently smooth them out with your fingers. Brushing a wet wig will damage the fibers. [5] X Research source
-
Let the wig dry. If you are in a hurry, you can place the wig in front of a fan. You can also blow a hairdryer over the wig, just make sure to use the "cool" setting.
-
Repeat the process if necessary. This method will usually straighten wavy wigs the first time. If your wig is very curly, you may need to repeat the whole process one or two more times. It also depends on how straight you want your wig to be. Let the wig dry completely before straightening it again.
Advertisement
-
Put the wig stand in the bathroom. If there are any windows open, be sure to close them. You want to trap as much steam as possible.
-
Run hot water in the shower until the room is steamy. How long it takes for the steam to appear will depend on how warm or cold the room was to begin with.
-
Gently brush the wig with a wide toothed comb or a wire wig brush. [6] X Expert Source Nikia Londy
Hair Augmentation Specialist Expert Interview. 7 October 2021. Always start brushing from the ends first, and work your way up to the roots. The steam will heat the fibers up and cause the curls to loosen. -
Remove the wig from the room once condensation starts to build. Transfer the wig to a cool, dry place.
Advertisement
-
Gather all of the hair, except the bottom section, into a loose bun at the top of the wig. Secure the bun with a hair clip. The only hair that is hanging loose should be the hair that is sewn along the bottom edge/hem of the wig.
- If you look closely, you may notice that the hair is sewn to the wig cap in rows. These are known as wefts. Pay attention to these. You will be using them as your guide.
-
Spray the bottom layer with water. This will keep the fibers from overheating.
-
Gather a 1 to 2 inch (2.54 to 5.08 centimeters) wide section of hair. The best place to grab this section is from the front of the wig, at one of the temples. This way, you can work your way around the back of the wig and to the other side.
-
Smooth the fibers down with a wide toothed comb or a wire wig brush. Make sure that the section is completely tangle-free.
-
Set the hairdryer to a low heat setting. [7] X Expert Source Nikia Londy
Hair Augmentation Specialist Expert Interview. 7 October 2021. Do not use a high heat setting; this will cause the fibers to melt. -
Move the comb/brush and hairdryer downwards at the same time. Once the section of hair is completely tangle-free, place the comb/brush at the roots of the wig. Make sure that the bristles are under the fibers. Hold the hairdryer a few inches away from the fibers with the nozzle pointing towards the fibers. Slowly move the comb/brush and hairdryer down towards the ends of the section at the same time. Keep the fibers between the comb/brush and the hairdryer nozzle at all times.
-
Repeat, working upwards by section. Once you have finished a row, undo the bun and let the next layer fall loose. Gather the rest of the hair into a loose bun and secure it once again with a clip. Use the wefts/rows as your guide. You can work with one to two wefts/rows at a time.
Advertisement
-
Use this method only on heat-resistant wigs. Some wigs are made from heat-resistant fibers. This means that the usual wig straightening methods will not work on them. You can, however, use a hair straightening on a heat-resistant wig. Do not use this method on any other synthetic hair wig. The heat will melt the fibers.
- The wig will usually say on the packaging whether or not it is heat-resistant.
- If you bought your wig online, the website will tell you if the fibers are heat-resistant. If the website does not say anything, the wig is most likely made from regular synthetic fibers that are not heat-resistant.
-
Pull the wig hair up into a loose bun, but leave the bottom-most weft loose. Secure the wig hair with a clip. The hair that is attached to the hem of the wig should be the only part that is hanging loose. This is the first layer of hair that you will be straightening.
- If you look closely at your wig, you may notice that the hair is sewn into the wig cap in rows. These are known as wefts. You will be using them as your guide.
-
Take a small section of hair and smooth out any tangles. Select a 1 to 2 inch (2.54 to 5.08 centimeters) wide section of hair. The best place to take the hair is from one of the temples. This way, you can work your way around the back of the wig and to the other side. Once you have your section, smooth out any tangles with a wide toothed comb. Always work from the ends first; never run a comb straight down from the roots to the ends.
-
Spray the small section of hair with water. Fill a spray bottle with water, then damped the section with it.
-
Turn your iron on to the lowest heat setting possible. Try to get the temperature somewhere between 160°C and 180°C (320°F to 356°F). This will be the safest for your wig.
- Some heat-resistant wigs can handle temperatures up to 410°F (210°C). Check the website where you bought the wig to find out what is the safest temperature for it. [8] X Research source
-
Run the section through the iron like you would with your own hair. You may see some steam, which is normal. If necessary, go over the strand a few more times until it is as straight as you want it.
-
Allow the fibers to cool down. Once they have cooled, you can run your comb through them and let them hang naturally from the wig.
-
Repeat the process for the rest of the row. Check for any ripples, and smooth them out with the hair straightener.
-
Once you have finished that row, undo the bun and let down the next layer of hair. Once again, try to use the wig wefts as a guide. You can work with one to two wefts at a time.
Advertisement
Expert Q&A
Search
-
QuestionCan you blow dry synthetic hair?Nikia Londy is a Hair Augmentation Specialist and the Founder and CEO of Intriguing Hair, a one-stop solution for women from all ethnicities wanting to purchase high-quality human hair extensions, hairpieces, and wigs. With over 16 years of experience, she specializes in artificial hair integrations, hair extensions, hair loss, hairpieces and wigs, and non-surgical hair replacement. Nikia holds a BA in Organizational Leadership from Charter Oak State College and received her Cosmetology Certification from Blaine Beauty School. She is also a member of the American Hair Loss Council.You can, but you have to keep your dryer on a low heat setting. To make things easier, split the hair into sections and blow dry them one by one.
-
QuestionShould I use conditioner on a synthetic wig?Nikia Londy is a Hair Augmentation Specialist and the Founder and CEO of Intriguing Hair, a one-stop solution for women from all ethnicities wanting to purchase high-quality human hair extensions, hairpieces, and wigs. With over 16 years of experience, she specializes in artificial hair integrations, hair extensions, hair loss, hairpieces and wigs, and non-surgical hair replacement. Nikia holds a BA in Organizational Leadership from Charter Oak State College and received her Cosmetology Certification from Blaine Beauty School. She is also a member of the American Hair Loss Council.For sure! It's a great idea to apply some leave-in conditioner after your wig dries off completely.
-
QuestionWhat if I don't know what kind of wig I have?Jadeyboo-ChanCommunity AnswerTry using a comb (I used one that was made for human hair, but it wasn't used before) and wet it with warm water. I had a short wig so it was a bit easier. But what I did was I used that wet comb and started at the bottom layer without having to put the hair in a bun and whatnot. I combed it out, but the edges were flipped outwards (again, I had about a shoulder-length wig so it was already like that. If you have a longer wig it most likely will not do this). I slowly made my way up to the roots, and it was pretty straightened. Now, I used my wig for a Terezi Pyrope cosplay so it didn't need to be too straightened, but I would definitely recommend this method.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Some synthetic fiber wigs are made out of heat-resistant fibers. The wig label or website will say if it is heat-resistant.Thanks
- If your wig is not straight enough, repeat the straightening process. Very curly wigs may need to be straightened two to three times.Thanks
- Use a wide toothed comb or a wire wig brush to detangle your wig. Never use your personal brush.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not brush your wig while the fibers are wet. This can cause the fibers to stretch, snap, and frizz.Thanks
- Do not use your hairbrush on your wig. The natural oils from your hair can degrade the wig fibers.Thanks
- If the wig won't straighten at all, check to see what the fibers are made out of. Natural fibers (human hair) and heat-resistant fibers will need to be straightened with a hair straightener.Thanks
- Do not use a flat iron or a hair straightener on your wig unless the wig is made from heat-resistant fibers. The heat is often too intense for wig fibers, even on the lowest setting. You may end up melting the wig fibers.Thanks
Advertisement
Things You'll Need
Preparing the Wig
- Wig
- Wig head
- Wig stand
- Sewing pins or T pins
- Wide toothed comb or wire wig brush
Using Hot Water
- Thermometer
- Large pot
- Water
- Stove
- Wide toothed comb or wire wig brush
Using Steam for Gentle Straightening
- Shower
- Wide toothed comb or wire wig brush
Using a Hairdryer for Extreme Straightening
- Wide toothed comb or wire wig brush
- Hairdryer
- Hair clips
- Spray bottle
- Water
Straightening a Heat-Resistant Wig [9] X Research source
- Wide toothed comb or wire wig brush
- Hair straightener
- Hair clips
- Spray bottle
- Water
References
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ https://www.cancercare.org/publications/311-synthetic_wig_care_and_resources
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ Nikia Londy. Hair Augmentation Specialist. Expert Interview. 7 October 2021.
- ↑ Epic Cosplay, Straightening a Wig with Heat
- ↑ Epic Cosplay, Straightening a Wig with Heat
About This Article
Article Summary
X
To straighten a synthetic wig, try putting it in your bathroom and running a hot, steamy shower, which will make it easier to brush out any curls and straighten them. You can also wet the wig and then use a brush and a hairdryer on a warm setting to straighten it. If you don't have a hairdryer on hand, you can use boiling water to straighten the wig instead. Just boil some water to between 320 and 356 degrees Fahrenheit and then pour it over your wig, letting it air dry or using a fan to speed up the drying process. To learn how to straighten heat-resistant synthetic wigs, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 499,823 times.
Reader Success Stories
- "I particularly like the idea of straightening the hair using the steam method with the steam from the shower. Very clever. I never thought of that!" ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I particularly like the idea of straightening the hair using the steam method with the steam from the shower. Very clever. I never thought of that!"
..."
more
"Read a lot of things I didn't know about hair pieces."
