Download Article
Download Article
Nothing gets on your nerves more quickly than a squeaky door hinge. After a while, dirt and grime build up within the hinge, wearing down the metal and making it sticky. Maintaining the life of your door hinges and eliminating that squeakiness or stickiness only requires a few tools and a few minutes of your time. Learn to purchase the right products and do the job correctly.
Steps
-
Purchase suitable lubricant. Lubricant used on door hinges should be capable of penetrating the grime and coating the interior of the hinge to keep it working effectively. It's important to get a can or container that has a thin nozzle to access the hinge area. Ask your local hardware dealer for a good and affordable spray lubricant. Good varieties and brands to use on hinges include: [1] X Research source
- Silicone spray lubricants like Blaster or Tri-Flow are usually the most widely-available and easiest lubricants to use for greasing door hinges.
- Lithium grease is effective and dust-resistant, available in large quantities at most auto parts stores. Primarily used for lubricating car parts, this will do the trick and be useful in other situations as well.
- Food-grade oils like olive, canola, or coconut oil can also be used in a pinch to lubricate sticky hinges. If the door works relatively well but still squeaks, these are effective ways of fixing a quick squeak. Food oils tend to attract dust and grime, however, making them less desirable than silicone, or other varieties of lubricant.
-
Find the hinge pin. Each door hinge consists of the hinge itself and the pin used to hold the two components of the hinge together, the door to the wall. Look for the round hinge pin that sits between the flat plates on the hinge. This hinge pin holds the hinge plates together and will need to be removed to lubricate the hinge effectively.Advertisement
-
Remove the hinge pin. Open the door and pull out the pin some of the way from the hinge. On some hinges, you may be able to use your fingers, but it's likely you'll need to use long pliers to move the pin counterclockwise to remove it. Be careful to avoid scraping your knuckles.- Some hinge pins can be rusted or otherwise difficult to remove. If you're struggling to get it loose, you might use a screwdriver or some PB blaster to help to loosen the pin. Read the following section for more specific information on dealing with stuck pins.
-
Clean, and Apply lubricant. After removing the hinge pin, clean off the old grease and grime from the pin and the hinge plates using a disposable rag or paper towel. Then, apply a thin coat of lubricant directly onto the hinge pin, as well as into the hinge itself.
-
Reassemble the hinge. Push the hinge pin back into place and ensure that it is secured. [2] X Research source
-
Verify. Open and close the door several times to work the lubricant around the innards of the hinges. If the door continues to squeak when you open and close it, repeat this process for each hinge until the squeak disappears.
-
Use a rag or paper towel to clean up. Wipe away any excess grime, oil drips, and dust from the hinge area to leave it clean. The build up of grime is why the hinge becomes squeaky in the first place, making it important that you clean it up while you've got the chance.
Advertisement
-
Soak rusty hinges in PB blaster. If you're struggling to remove the hinge pin from a sticky door, soak it in some penetrating lubricant spray for up to 12 hours before trying to remove it. WD-40 is another product commonly used for the purpose. [3] X Research source Spray a liberal amount of penetrating spray onto the hinge and let it sit.
- Many people starting forcing the pin out with a hammer, but if it is very rusted, this could damage the wood of the door, break the hinge, and leave you with a bigger repair job on your hands.
-
Gently tap the end of the pin with a screwdriver. After letting it soak, use the end of the screwdriver to tap the pin through the hinge, pushing it out gently. This can be a more effective way of getting the pin removed from the hinge to lubricate it.
- Use something small enough to push the pin out. The tip of a pair of pliers, even an ink pen or another small thin tool might be appropriate for the job. Find something the approximate size of the hinge you're working on.
-
Repair the pin, if necessary. Roll the pin on a flat surface to see if it is bent, and examine the pin for signs of wear. If it's very rusty and bent, it's good to spend a little bit of time straightening it out and cleaning it up before re-installing it, so you can avoid a squeaky door in the future.
- If it's bent, straighten it out by putting it on a cement floor and tapping it with a hammer to bend it back into shape.
- Use emery cloth to sand down the pin, removing the rust. This will help the pin fit more loosely, creating less resistance and less potential for squeaking.
Advertisement
Expert Q&A
Search
-
QuestionWhat causes door hinges to squeak?Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.A lot of doors have cheap hinges that rub on themselves in a squeak—you'll find little metal shavings at the bottom of the hinge because of it. Switching to ball-bearing hinges can help eliminate all the squeaking and rubbing.
-
QuestionMy boyfriend boiled my TV mount for my plasma TV. How do I remove the oil from the hinges?Community AnswerUse any kind of lemon based soap, apply thick layer and leave overnight, wipe with cloth the next day.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Replace hinges that are rusted; they are only going to get worse and decay more. [4] X Research sourceThanks
- You can usually 444 as you open it.Thanks
- Always start with a small amount of oil and increase as needed; it is much easier to add more than to remove excess oil!Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Lubricating oil with appropriate nozzle
- Paper towels or rags
- Hammer
- Screwdriver
References
- ↑ http://www.home-repair-central.com/how-to-lubricate-door-hinges.html
- ↑ https://www.familyhandyman.com/doors/repair/how-to-silence-a-squeaking-hinge/
- ↑ https://www.popularmechanics.com/cars/how-to/a6064/wd-40-vs-the-world-of-lubricants/
- ↑ http://www.home-repair-central.com/fixing-a-rusty-hinge.html
About This Article
Article Summary
X
To lubricate a squeaky door hinge, purchase a silicone or lithium-based lubricant. With the door open, locate the pin that holds the hinge together and carefully pull it out using pliers. Clean any old grease and grime off the hinge pin, then coat it with a thin layer of your lubricant. Apply some of the lubricant to the hinge as well. When you’re done, push the hinge pin back into the hinge and test the door to make sure it’s working smoothly. Wipe away any excess lubricant with a clean rag or paper towel. For extra stubborn, rusty, or grimy hinges, you may need to soak the hinge with a penetrating lubricant spray and let it sit for a few hours before you can remove the pin. Then, gently push the pin out of the hinge by tapping it with a screwdriver. If the pin is very rusty or bent, you may need to sand it down or straighten it with a hammer before putting it back in the hinge.
Did this summary help you?
Thanks to all authors for creating a page that has been read 360,058 times.
Advertisement
90%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Straight forward and easy to understand."
