Download Article
Download Article
Magnetizing a steel screwdriver before you disassemble a complicated machine makes the task much easier so pieces stick to the screwdriver once they’re loose. It's also an easy experiment to do with children since it only requires a few specialized tools. Check the steel with an existing magnet before you begin: if it doesn't respond, the process will not work.
Steps
-
Use this to quickly make a temporary magnet. Keep a strong magnet around, and you can magnetize some types of steel with a couple minutes of work. This turns the steel into a weak magnet that loses its magnetism over time. [1] X Research source This method is ideal for magnetizing a screwdriver, nail, or needle just before use so they are attracted to metal and won’t easily get lost. You can also use it to restore magnetism to an old compass needle or another weakened magnet.
-
Find a strong magnet. You can use any magnet to "pass on" the magnetism to the steel, but ordinary refrigerator magnets will have a very weak effect. Neodymium or other rare-earth magnets are good options, available at home improvement stores, hobby stores, or specialized online magnet stores. [2] X Research source
- You can also purchase a "tool magnetizer" designed for this purpose.
Advertisement -
Test the steel's reaction to the magnet. If the steel isn’t attracted to the magnet, it can't be turned into a magnet itself. Also note that this method is easiest to use on long, thin pieces of steel, such as screwdrivers or nails, but will work on any shape of steel. [3] X Research source
- If you're considering purchasing stainless steel and can't investigate it before buying, ask the manufacturer what type of steel it is. You'll want "ferritic" stainless steel or stainless steel graded as part of the "400 series." Coincidentally, the varieties that can be magnetized tend to be cheaper, but that's not universally true.
-
Stroke the magnet along half the steel, repeatedly. Hold the steel object in one hand. Stick the magnet anywhere on the steel about halfway along its length, then drag it to one tip. Repeat several times, stroking only in one direction, and only along half of the steel. The more you do this, the more magnetized the steel will become. [4] X Research source
- You can magnetize a ball bearing or other small, steel object by rubbing the steel along the magnet, instead of vice versa.
-
5Stroke the opposite end of the magnet along the other half. Flip the magnet over so the other pole touches the steel. Place it against the steel at the midpoint again, but drag it the other way, toward the end of the steel that wasn't rubbed earlier. [5] X Research source Repeat until the steel can pick up a paper clip, or continue to rub to increase the strength slightly.
- If you're not sure where the two poles are located on the magnet, test them using a second magnet. One pole will attract a surface of the other magnet, and the opposite pole will repel the same surface.
Advertisement
-
Strip the insulation off both ends of a wire. Using wire stripping pliers, strip about 1 in (2.5 cm) of insulation from each end of an insulated wire. You'll need enough wire to wrap around your steel object at least 10 times.
- "Enameled wire" with thin insulation will have a stronger effect. Do not use bare wire without insulation, as this will interrupt the current and fail to work. [6] X Research source
- Supervise young children while they work with wires.
-
Wrap the wire around the steel. Leaving a couple inches (several centimeters) of wire at each end, wrap the insulated portion around the steel. The steel will become more magnetic the more times you wrap the wire. Use at least 10 loops for nails, and several dozen for larger objects. [7] X Research source
- Alternatively, wrap the wire around a heat-proof plastic tube large enough to insert your steel through.
- If a regular magnet is not attracted to the steel, don't bother trying to magnetize it with a battery. Some types of stainless steel cannot be magnetized.
-
Select a low-voltage battery. An ordinary 1.5V or 3V battery will provide a safe, DC power source sufficient to magnetize nails or screws. Larger steel objects may require a higher voltage battery, but these will create more heat, and a more dangerous electrical shock if handled improperly. A 12V car battery can be used if it is removed from the vehicle and the safety precautions below are followed, but higher voltages are not recommended. [8] X Research source
- Never use an electrical outlet or other AC power supply, as the high voltage could blow your house fuse or create serious safety risks. [9] X Research source
-
Use rubber gloves and rubber-handled tools. These will prevent the electrical current from reaching you. Although low-voltage household batteries are harmless in this respect, you may want gloves anyway as the metal can get quite hot if left in the coil.
-
Connect the wire ends to the battery. Attach one of the stripped wire ends to the positive terminal of the battery. Attach the other wire end to the negative terminal of the battery. For small household batteries, wrapping the wire around a brass paper fastener will make it easier to keep them together. Place the fastener head on the battery so the wire makes contact, then use tape or rubber bands to attach the fastener arms to the side of the battery. [10] X Research source An additional rubber band holding the fasteners in place lengthwise will make a more sturdy connection.
- If using a higher-voltage battery, you may see sparks when the circuit is completed. Only hold the wire by the insulated portion.
-
Test the steel. An electrical current flowing through the coil creates a magnetic field, which will magnetize any ferromagnetic metal placed inside it. If your variety of steel can be magnetized, it should be able to pick up small iron objects after a short time in the coil. [11] X Research source
- Putting magnetized steel through the coil a second time will demagnetize it again.
Advertisement
-
Find north. If you have a compass, the needle will point directly to magnetic north. Otherwise finding true north should be good enough for this method.
-
Arrange the steel so it points north. Put the steel object down, so its longest dimension is laid out north-to-south.
- This method will not work well for small objects or steel balls that cannot be arranged north-south.
-
Hold the steel in place. Tape the steel down or use a clamp or vise to hold it in place.
-
Strike the steel with a hammer repeatedly. Bash the end of the steel object repeatedly. The steel will gradually become a weak magnet and get slightly stronger each time you strike it. Test this by holding a paper clip next to the steel periodically.
- Some types of steel cannot be magnetized at home. Try a different steel object if you notice no magnetic effect at all, or switch to iron.
-
Understand why this works. The added energy from striking the metal allows the atomic-level magnetic domains to rearrange themselves in a magnetic field. Since the planet's iron core produces its own magnetic field, these miniature magnets rearrange themselves to point north. Once enough jostling has occurred, all these miniature magnets pointed in the same direction creates a magnetic effect strong enough for us to notice. [12] X Research source
Advertisement
Video
Community Q&A
Search
-
QuestionWhat could magnetize the handle of a dinner knife so that it attracts the other utensils?Community AnswerIt depends on the type of dinner knife. If the handle of the dinner knife is made out of steel, you could attempt to rub a magnet over it and magnetize it, but if it is stainless steel - which it usually is - it won't magnetize much. If it is iron, then you can try the same thing, however I doubt you would want to magnetize it much, I can just imagine things flying all over the dinner table.
-
QuestionHow can I do this using everyday items?Community AnswerYou can magnetize an iron rod by putting one end to the ground pointing north at 45 degrees and striking the other end with a hammer.
-
QuestionHow can I magnetize a steel strip using a permanent bar magnet?Community AnswerYou could rub the bar magnet over the steel strip but just in one direction (for example, from bottom to top, coming back to bottom without rubbing it on the way back). Also if you have a lot of time, you can magnetize the strip by leaving it attached to bar magnet for a few days.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Steel is already magnetic on an atomic level, but when the atoms are arranged at random, their magnetic effect is canceled out on a macroscopic level. All of these methods allow the atom-scale magnets to align with another magnetic field, causing them to all exert a magnetic force in the same direction. [13] X Research sourceThanks
- Strong magnets are created using specialized, high-voltage equipment not possible to recreate at home. [14] X Research sourceThanks
- Not all types of steel can be magnetized, as different additions during manufacture alter the microscopic arrangement of the metal's atoms.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Keep magnets away from hard drives, computer monitors, television monitors, and credit cards or ID cards with a magnetic strip.Thanks
- Always use insulated pliers and grab only the insulated portion of the wire when applying it to the positive battery terminal.Thanks
- Heat or striking force can jostle the magnetic atoms out of place, reducing or undoing the magnetization. [15] X Research sourceThanks
Advertisement
Things You'll Need
Magnetizing Steel Using an Existing Magnet
- Steel object (not all stainless steel will work)
- Magnet
Magnetize Steel Using a Battery
- Battery (1.5V for nails, up to 12V for larger objects)
- Enameled or insulated wire
- Wire strippers
- Insulated pliers
- Rubber gloves
Magnetizing Steel without Special Tools
- Hammer
References
- ↑ https://sciencing.com/magnetize-demagnetize-metal-8498102.html
- ↑ https://education.nationalgeographic.org/resource/magnetism
- ↑ https://education.nationalgeographic.org/resource/magnetism
- ↑ https://commons.princeton.edu/josephhenry/permanent-magnet/
- ↑ https://www.education.vic.gov.au/school/teachers/teachingresources/discipline/science/continuum/Pages/magnetism.aspx
- ↑ http://electronics.stackexchange.com/questions/77549/how-to-properly-wind-coils-for-a-solenoid
- ↑ https://sciencing.com/make-super-strong-permanent-magnets-6520830.html
- ↑ https://www.teachengineering.org/activities/view/cub_mag_lesson2_activity1
- ↑ https://www.school-for-champions.com/science/electromagnets.htm
- ↑ https://nationalmaglab.org/education/magnet-academy/try-at-home/making-electromagnets
- ↑ https://sciencing.com/make-super-strong-permanent-magnets-6520830.html
- ↑ https://van.physics.illinois.edu/qa/listing.php?id=436
- ↑ http://www.scientificamerican.com/article/why-dont-magnets-work-on/
- ↑ http://www.oersted.com/magnetizing.PDF
- ↑ http://www.school-for-champions.com/science/magnets.htm#.VLmyqcZEzS8
About This Article
Article Summary
X
If you have a strong magnet and want to temporarily magnetize steel, you can stroke the steel along the magnet repeatedly until the steel holds a charge. This will work best with Neodymium or other rare-earth magnets, especially when you pair it with a slender piece of steel, like a nail or screwdriver. If you don't have a magnet, you can magnetize steel by taping down a piece of steel so that it faces North to South. Then, bang on the steel repeatedly with a hammer until it holds a charge. To learn how to magnetize steel by using a battery, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 331,448 times.
Reader Success Stories
- "It informed me of the natural and man-made magnetic currency around me, and how I could recapture the natural arrangement of certain types of steel back into their natural microscopic arrangement. Thank you!" ..." more
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It informed me of the natural and man-made magnetic currency around me, and how I could recapture the natural arrangement of certain types of steel back into their natural microscopic arrangement. Thank you!"
..."
more
"Homeschooling children can sometimes be a hassle because the materials used in the classroom are not easily obtained. wikiHow has helped tremendously in the science department with the articles available. Thank you for providing great information and ideas."
..."
more
"I got more enlightened on how to produce a magnetic field easily with simple tools. I'm thinking of producing simple toys with this idea. Once again, thanks so much."
..."
more
"This article was a great help! We were needing to "machine" some magnets. This way we can make our own out of steel and then magnetize them. Who knew?"
..."
more
"My son wanted to make a magnet for his school's science fair. Your article is the most complete and comprehensive I found. Thanks so much!"
..."
more
