PDF download Download Article
Learn 3 fabulous ways to give your dolls a dazzling 'do
PDF download Download Article

Adding hair to an amigurumi, or a crocheted doll, can help make it look even more doll-like and add a little glam in the process. It's an easy addition that helps bring your creation to life. We'll show you how to make basic, styled, and curly amigurumi hair, so that your crafty little people have the 'dos they deserve.

Things You Should Know

  • Use the same pattern you used for the doll's head to make a wig cap in the hair color you want. Sew the cap onto the doll's head with a running stitch.
  • Wrap a length of yearn around a piece of cardboard that's the desire length of your hair, then cut along the bottom to create your strands.
  • Use your crochet hook to pull each strand through the wig cap, then tie them in place to secure them.
Method 1
Method 1 of 3:

Making Basic Amigurumi Hair

PDF download Download Article
  1. You can use any color of yarn you want, including pink or purple. Try to use the same weight of yarn as you did for the rest of the doll. For example, if you made your amigurumi using crochet thread, you should use crochet thread for the hair as well.
  2. Use the same pattern as you did for the amigurumi's head. The wig cap will be placed at an angle on the back of the head. How far down the cap goes depends on where you want the hairline to be. [1]
    • Leave a long tail of yarn at the end of the wig cap so that you can sew it on.
    Advertisement
  3. Thread a yarn needle onto the tail end of the wig cap. Position the wig cap over the back of the head. Once you are happy with the placement, sew the cap onto the head using a running stitch. Sew along the bottom edge of the wig cap, then knot and snip the yarn when you are done. [2]
  4. Cut a piece of cardboard down the length you want the hair to be first. Next, wrap the yarn lengthwise around the cardboard. Hold the yarn along the top or bottom edge so that it doesn't slip off. Depending on the size of the doll you are making, plan on wrapping the yarn about 50 to 70 times. Start and finish wrapping at the bottom edge of the cardboard. [3]
  5. You will now have 50 to 70 separate strands that are twice the length you need them to be. Don't worry; the hair will be the right length once you attach it. Keep all of the yarn strands together. [4]
  6. Make sure that you are inserting the hook through the actual cap, and not through the running stitch you used to sew the cap onto the head. [5]
    • Use a crochet hook that matches the yarn you are using.
  7. Pluck out one of your cut strands of yarn. Find the middle and catch it with the hook. Slide the crochet hook back out of the stitch on the wig cap, pulling the yarn strand with it by about 1 inch (2.54 centimeters). [6]
  8. Use your fingers or the crochet hook to grab the tail ends of the yarn strand. Pull them through the small, 1-inch (2.54-centimeter) loop. Gently tug on them to tighten the knot. You've just attached your first strand! [7]
  9. Use the same method you just did to attach more strands of yarn to the wig cap. Keep going until you filled the entire bottom edge of the wig cap.
    • If you did not make a wig cap, consider sketching a guide line with a dressmaker's pen.
  10. Work your way row by row until you reach the top of the head. Because of how much space yarn takes up, you do not need to fill every row/stitch. Make sure that you fill the very top of the head, however! [8]
  11. Use your fingers to brush the yarn hair how you want it to lay. If you need to, trim the hair with scissors until it is the length you want it to be. Do not brush the yarn hair; otherwise the yarn will come apart. If you must brush it, use your fingers only.
    • If you want your amigurumi to have curly hair, you can gently unravel the strands of yarn with a wide-toothed comb. This works best on 4-ply yarn.
  12. Advertisement
Method 2
Method 2 of 3:

Making Pre-Styled Amigurumi Hair

PDF download Download Article
  1. You can make the hair using any color of yarn you want, but it should be the same weight. If you make your amigurumi with crochet thread, you should use crochet thread for the hair as well.
    • This method will create hair that is permanently styled into a ponytail or two pigtails.
  2. Use the same color of yarn as you are going to use for the hair. You will be slipping the wig cap over the back of the head, so size it accordingly. How tall you make the cap depends on where you want the hairline to be. [9]
    • Leave a long tail of yarn at the end of the wig cap. This will allow you to sew it on.
  3. Thread a yarn needle onto the long tail of the wig cap. Slip the wig cap over the back of the amigurumi's head. Sew the wig cap onto the head using a running stitch. Make sure that the stitches go right along the bottom edge of the wig cap. When you are done, knot and snip the yarn. [10]
  4. Cut the cardboard down to the length you want the hair to be first, then wrap the yarn lengthwise around it, about 50 to 70 times. Begin and finish wrapping at the bottom edge of the cardboard. [11]
    • Hold the yarn along one of the edges so that it doesn't slip off of the cardboard.
  5. You will now have a ton of little strands of yarn that are twice the length you need them to be. Don't worry; they will be the right length once you attach them to the head. [12]
  6. Choose a crochet hook that matches the yarn you hare using. Insert it through one of the stitches on the edge of the wig cap—not the running stitch. [13]
  7. Pick up one of your cut yarn strands. Find the middle, then slip it over the point of the crochet hook. Use the crochet hook to pull the strand back through the stitch by about 1 inch (2.54 centimeters). [14]
  8. Use your finger or crochet hook to pull the two tail ends of the yarn through the 1-inch (2.54-centimeter) loop. Tug on them to tighten the knot. [15]
  9. Use the same method you just did to attach more strands of yarn to the wig cap. Keep going until you filled the entire bottom edge of the wig cap. [16]
    • If you want a thick ponytail, add another row of yarn strands just above the first one.
  10. Imagine a line going from the center-front of the hairline to the center-back of the nape. Attach more yarn strands to this line using the same method as before. You need two lines, right next to each other. [17]
    • Make the strands on the left line point to the left, and the strands on the right line point to the right.
    • Skip this step if you are making a ponytail.
  11. Pull your amigurumi's hair into a ponytail or two pigtails. Wrap a piece of colorful yarn around it to secure it. [18] For a tighter hold, wrap a clear elastic around the ponytail or pigtails first, then add the yarn.
    • The ponytail should be placed high on the amigurumi's head.
    • Use the double center part as a guide for the pigtails. For a fancier doll, you can braid the pigtails instead.
  12. Advertisement
Method 3
Method 3 of 3:

Making Curly Amigurumi Hair

PDF download Download Article
  1. You can use any color of yarn you want, even blue, but it should be the same weight as the rest of the doll. If you made your amigurumi using crochet thread, then you should use crochet thread for this as well.
  2. Use the same pattern as you did for the amigurumi's head. How long you make the wig cap depends on how far down you want the hairline to go. [19]
    • Cut the tail end of the wig cap long enough so that you can sew it onto the doll.
  3. Place the wig cap over the back of the doll's head. Thread a yarn needle onto the tail end of the yarn, then use a running stitch the sew it in place. Make sure that you are placing the stitches on the bottom edge of the wig cap only. Knot and cut the yarn when you are done. [20]
  4. Insert the crochet hook through a stitch along the bottom edge of the wig cap. Catch the yarn with it, then pull it back through the stitch to make a small loop. Bring the hook back over the stitch, and catch some more yarn. Pull it through the loop; this will cause the loop to fall off of the hook. [21]
    • You can start anywhere along the edge of the wig cap you want, but somewhere along the back might be the best.
    • Don't worry about the tail; you'll weave it back into place later on.
  5. Chain stitch until the strand of hair is a little longer than you want the curl to be. The chain will become shorter once it starts to curl. Consider making it about two stitches longer. [22]
  6. Work your way back down with a single crochet . When you are back to where you started with the first chain stitch, stop, and prepare to make your next curl. [23]
  7. Move your crochet hook over by one stitch on the wig cap. Insert it into the next stitch, and pull up a loop of yarn. [24]
  8. Make another chain, just like the first one. Work your way back down using single crochet. Move the hook over by one stitch, and make another curl. [25]
  9. Once you finish the bottom row, move the crochet hook up by one stitch, and do the next row. When you finish the last curl, knot the yarn to the wig cap, cut it, then weave the tail into the cap. [26]
    • You may notice that the curls take up a lot of room, so it's okay if you skip rows or stitches. [27]
  10. Thread some more yarn onto a yarn needle. Knot the end, then use it to stitch the curls down onto the wig cap into a position you like. Start with the bottom layer first, then work your way to the top. [28]
    • You can skip this step if you want your amigurumi to have wild, unruly hair.
  11. Thread the tail onto a yarn needle. Weave the tail back into the wig cap along the edge with a simple running stitch.
  12. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • You don't have to make a wig cap, but it will help blend the hair into the head better and conceal any bald patches. [29]
      • Read the label that came with the yarn to find out what size hook you should use.
      • Make the top of the amigurumi's head using your desired hair color. This way, you won't have to make a wig cap!
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Completed amigurumi
      • Yarn or crochet thread
      • Crochet hook
      • Yarn needle
      • Scissors


      About This Article

      Thanks to all authors for creating a page that has been read 58,031 times.

      Did this article help you?

      Advertisement