How to Make Cardboard

PDF download Download Article
PDF download Download Article

Corrugated cardboard is the thick brown material that makes up all cardboard boxes. The process for making corrugated cardboard is fairly complex and involves several very large machines. However if you only need a few small sheets of cardboard and don't have any handy, you can make a cardboard substitute out of just a few pieces of paper!

Method 1
Method 1 of 2:

Making Cardboard Substitute

PDF download Download Article
  1. You'll need five sheets of paper and some glue. A glue stick or some craft glue will work the best.
    • The dimensions of your paper will affect the size of your cardboard, so use smaller paper if you want a smaller piece of cardboard.
    • Using more sheets of paper will result in thicker cardboard.
    • If using liquid glue, consider spreading out some newspaper to catch any glue that drips off of your cardboard.
  2. Spread your glue on one side of a sheet of paper, then align a second sheet of paper and stick them together. The corners and edges should align as closely as possible. This will form the foundation for your cardboard.
    Advertisement
  3. Run the heel of your hand across the foundation, both from the bottom of the page to the top and from side to side. Make sure all sides and corners are glued together.
    • If any edges or corners are loose, pull them apart as little as possible and add more glue. Reattach the sheets and press together again.
  4. Spread glue on the top page of your foundation, then align and attach another sheet of paper. Make sure to line up the corners and edges before sticking the pages together. Firmly press down on the foundation after each sheet of paper is added to make sure all of the paper is staying glued together. Continue to add sheets onto the foundation until your cardboard is the desired thickness.
    • Adding more sheets of paper will increase the thickness of your cardboard.
  5. Put your cardboard under a fan or in a warm location to speed up the drying process.
    • Be patient! If the glue doesn't dry completely your cardboard may fall apart.
    6. Advertisement
Method 2
Method 2 of 2:

Making Corrugated Cardboard

PDF download Download Article
  1. Cardboard is simply a sheet of ridged paper sandwiched in between two sheets of flat paper. The corrugator organizes and assembles the three different sheets to make corrugated cardboard. [1]
    • The ridged paper increases the stability and durability of the cardboard while using a relatively small amount of paper.
  2. The machine heats the flat paper to 350 degrees Fahrenheit and pushes it through ridged rollers. The result is a sheet of paper with a repeating U-shaped design that will be used as the core of the cardboard. [2]
  3. The corrugator applies a starch-based glue to one side of the ridged sheet, which is then pressed onto a sheet of flat paper. The same process is used to apply another flat sheet to the untouched side of the ridged sheet, creating the familiar corrugated sheet of cardboard. [3]
  4. Further cuts and perforations are made to allow for folding into various shaped boxes and containers. [4]
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Will it be very stiff like cardboard?
    Community Answer
    If you use many pieces of paper, yes. The more pieces there are, the thicker it gets, resulting in harder paper.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 63
  • Question
    How do I cut and bend the cardboard into a box?
    Community Answer
    Always start with a large piece of cardboard. In the middle, you'll have the layout of one square in the middle and four squares on each side of your first square (forming a plus sign). Choose one of the sides and then add an additional square, which will serve as the lid. In the end your box should look like a cross. (Make the measurements exact so the box comes together properly.) Then, I would recommend scoring each line before folding the box.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 25 Helpful 38
  • Question
    Is the cardboard sturdy enough to make a shelf or will it break?
    Community Answer
    It depends upon what you want to put on the shelf, and the thickness of you cardboard. You can't put any liquids that might spill on it either, that would ruin the cardboard.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 36
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • The more sheets you add, the thicker the cardboard will be. Make sure the glue is fully dried or else it could fall apart. You may also want to consider card stock or other thick paper. Construction paper may work too.
      • if you use cardstock, you might not have to apply that many layers of card stock.
      • Be sure to put glue all over one side of the paper, not just around the edges.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      Beat Boredom with These Creative Craft Ideas
      How to
      Make a Rubber Band Star
      How to
      Make a Cooler from Insulating Material
      How to
      Create a Time Capsule That’ll Withstand the Test of Time
      How to
      Build a Homemade Rube Goldberg Machine
      How to
      Make a Coupon Book for Tasks
      6 Simple Icee Slime Recipes: Blue Raspberry, Cherry, & More
      How to
      Make DIY Fabric Bows without Sewing
      How to
      Build a Nativity Stable
      How to
      Cut Popsicle Sticks
      How to
      Make a Tin or Aluminum Foil Hat
      How to
      Build a Homemade Jack in the Box Toy
      Simple Steps to Clean & Polish Luxury Vinyl Plank Flooring
      How to
      Make Liquid Starch
      Advertisement

      References

      1. ↑ http://www.madehow.com/Volume-1/Corrugated-Cardboard.html
      2. ↑ http://www.madehow.com/Volume-1/Corrugated-Cardboard.html
      3. ↑ http://www.madehow.com/Volume-1/Corrugated-Cardboard.html
      4. ↑ http://www.madehow.com/Volume-1/Corrugated-Cardboard.html

      About This Article

      Article Summary X

      To make cardboard substitute, start by gluing 2 sheets of paper together and firmly press them with your hand. Then, continue to glue sheets onto your foundation, 1 sheet at a time. After you glue each sheet, press it down firmly onto the cardboard and make sure all of the corners are stuck down. If necessary, apply more glue to a corner or edge, then press the paper together again. Work until you reach your desired thickness, then leave your cardboard to dry for 30 minutes before using it. For information on how to make corrugated cardboard, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 132,441 times.

      Did this article help you?

      Advertisement