How to Make a Clay Pot

PDF download Download Article
PDF download Download Article

The venerable clay pot has its roots deep in ancient history. Our ancestors needed vessels to carry water and store food, and found the water-resistant naturally occurring clays in the soil were ideal. Even though today we can buy our vessels at the store and usually carry our water through pipes, clay pots remain beautiful, and are functional works of art and craft.

Method 1
Method 1 of 4:

Preparations

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot
    Start with about 1/2 pound (.25 kilos) of clay. Slowly warm it and work out the air bubbles by kneading it with your hands. This will even out the clay’s consistency, eliminating lumps of soft spots, and make it more pliable and easier to work with. Take care to avoid folding, poking, or other actions that could add air pockets and bubbles to your clay—these could cause your pottery to explode in the oven.
  2. Watermark wikiHow to Make a Clay Pot
    Advertisement
    4. Advertisement
Method 2
Method 2 of 4:

Coiled Clay Pots

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot
    The diameter of the coil will determine the thickness of your pot's walls. For your first pots, roll your coils out till they’re a little thicker than a pencil, and about 12 to 24 inches (30 to 60 cm) long. Sculptor Natasha Dikareva suggests "keeping the coil as even in thickness as possible."
    • You may get thin or weak spots as you roll your coil out. Try avoiding that section as you work, but if it becomes a problem just break the coil at the weak spot, set one part aside, and finish the other.
  2. Watermark wikiHow to Make a Clay Pot
    [1] Starting from one end, wrap the coil in a spiral until the bottom is the size you have in mind. For example, for a pot using coils about 1/4 inch (.6 cm), your base might be 3 inches (8 cm) in diameter.
    • You can also create the bottom by rolling out some clay to about the same thickness as your coils, and then trim the excess with a knife, using cup or plate as your guide.
  3. Watermark wikiHow to Make a Clay Pot
    Score the outer 1/4 (.6 cm) inch of the bottom, and dampen with water or slurry (a thin mix of clay and water). Do the same with the bottom of the coils as you work. This will improve the clay bond and make your pot stronger. Lay the first coil on top of the base, and wrap it around, building up the wall.
  4. Watermark wikiHow to Make a Clay Pot
    To make your work durable, strengthen the clay bond by smoothing down the inside of the pot, forcing down the clay from the upper coil into the joint below it.
  5. Watermark wikiHow to Make a Clay Pot
    Create your contours by adjusting the placement of the coils, and shaping the clay during the smoothing and strengthening process. If the clay is a little hard, sculptor Natasha Dikareva advises that "you might need to slip and score in between the coils to make sure they stick together nicely."
  6. Add any decoration or glazing as desired, and depending on what kind of clay you are using you may air-dry your pot, bake it, or fire it in a kiln. Follow the manufacturer’s instructions on the correct method.
    7. Advertisement
Method 3
Method 3 of 4:

Make a Pinch Pot

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot
    Roll the clay into a ball, and make sure it's moist.
  2. Watermark wikiHow to Make a Clay Pot
    Sculptor Natasha Dikareva suggests "using your thumb to create a hole that doesn't go all the way through the clay."
  3. Watermark wikiHow to Make a Clay Pot
    According to sculptor Natasha Dikareva, "Start to rotate your bowl with the thumb inside your bowl. Then, squeeze and pull at the same time." Work all around the inside, and with each pass, pinch from the bottom and move up, repeating until your vessel has the shape you want.
  4. Watermark wikiHow to Make a Clay Pot
    Press from the inside, against the table you're working on, so that the bottom is smooth and flat. Sculptor Natasha Dikareva adds that "you can also use a paddle tool to shape your pinch pot and create a nice bottom for it."
  5. Watermark wikiHow to Make a Clay Pot
    Decorate, and follow the manufacturer's instructions for curing and finishing your pot.
  6. Watermark wikiHow to Make a Clay Pot
    For more detailed information, see How to Make a Pinch Pot .
    7. Advertisement
Method 4
Method 4 of 4:

Using a Wheel

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot
    Throw it firmly from hand to hand, smacking it into a ball shape.
  2. Watermark wikiHow to Make a Clay Pot
    This will help the ball of clay adhere to the wheel once it starts spinning. The last thing you want is a ball of wet clay flying across the room.
  3. Place a bucket of water where you can easily reach it to wet your hands while you work.
  4. Watermark wikiHow to Make a Clay Pot
    Throw down the ball of clay as close to the center of the wheel as you can, then press it down into a conical shape. [3]
  5. Watermark wikiHow to Make a Clay Pot
    [4] As you build up speed, wet the clay, and with one hand on the side of the clay lump, and the other side on top of it, ease the clump towards the middle. Use the upper hand to keep the clay from flying out of control.
    • You can tell the clay is centered when it no longer looks like it's wobbling, but sitting stationary in the center of the spinning wheel. Don't stop spinning.
  6. Watermark wikiHow to Make a Clay Pot
    [5] Then work the clay into a cone, then press it down into a thick disk. Repeat this step a couple times. This is known as "wheel wedging" and helps to condition the clay. Make sure you keep the clay centered as you work.
  7. Watermark wikiHow to Make a Clay Pot
    [6]
  8. Watermark wikiHow to Make a Clay Pot
    Continue working the hole, using a hand on the outside of the clay to shape your pot.
  9. Watermark wikiHow to Make a Clay Pot
    Gradually pull the clay up with even pressure, until it's the desired height. [7]
  10. Watermark wikiHow to Make a Clay Pot
    If you want it a bit wider at the neck, just pull back with your inside fingers. Don't do it too hard.
  11. Watermark wikiHow to Make a Clay Pot
    [8] Wet the wheel (not the pot) and using a stiff wire or fishing line, and holding it with both hands, pull it from the back of the pot towards you until the pot is separate from the wheel.
    13. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you open clay?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    Ultimately, you have to find a position that's comfortable for you. Some people use their thumb while some use their index finger. Other people find it more comfortable to hold a sponge or use their middle finger.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
  • Question
    How can you tell if clay is centered?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    The clay isn't moving and you aren't moving. Plus, you aren't fighting the clay—it's perfectly still but spinning in a circle.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 5
  • Question
    How do you make pottery tall?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    Use a technique called pulling! Change your hand position to have one hand on the outside of your piece and one on the inside. Use one hand to pull the clay over the other and then pull straight up, as though you're pulling straight toward your nose. You might have to do this 5-8 times before you're happy with your pot's height.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • A great trick to eliminate air pockets is to keep the clay in a round shape, never flattening the clay more than halfway. and keep throwing the clay back and forth between your hands. You can also throw the clay on a hard surface (like a table) multiple times.
        Thanks
        Helpful 30 Not Helpful 8
      • Don’t use your fingertips when kneading the clay
        Thanks
        Helpful 25 Not Helpful 8
      • Make sure when using a kiln you use the score and slip to attach other pieces.
        Thanks
        Helpful 17 Not Helpful 7
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Carefully follow the instructions on how to bake your clay if it is not an air drying kind. This is because if dry clay gets into the air or flicked about, it forms a dust called silica dust which causes long term health problems.
        Thanks
        Helpful 19 Not Helpful 2
      • Follow the directions for materials to work on. Some clays will stain wood.
        Thanks
        Helpful 17 Not Helpful 3
      Advertisement

      You Might Also Like

      How to
      Make a Papier Mâché Vase
      How to
      Make Flowers With Clay
      How to
      Make a Silicone Mold
      17 of the Most Valuable Pottery and Porcelain Marks
      How to
      Bake Polymer Clay in a Conventional or Toaster Oven
      How to
      Harden Modeling Clay
      How to
      Make a Clay Person
      How to
      Color Air Dry Clay
      How to
      Soften Polymer Clay
      How to
      Revive Dry Clay
      How to
      Make DIY Clay Dolls at Home
      How to
      Drill a Clay Pot
      How to
      Dry Non‐Hardening Modeling Clay
      How to
      Make a Clay Volcano
      Advertisement

      References

      1. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      2. ↑ Natasha Dikareva, MFA. Ceramics & Sculpting Instructor. Expert Interview. 5 May 2020.
      3. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      4. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      5. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      6. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      7. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      8. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      9. Videos provided by The Clay Teacher
      1. Sculpey
      2. http://people.goshen.edu/~marvinpb/throw/preparation.html

      About This Article

      Article Summary X

      To make a clay pot, start by rolling some moist clay into a ball. Then, use your thumb to press an indent into the center of the clay that's about 1/4 of an inch from the bottom. Next, hold your thumb in the indent you made and rotate the clay as you pinch the sides with your finger to widen the hole. Continue doing this until you're satisfied with the size of the hole and the thickness of the sides. Finally, flatten out the bottom of your pot so it's able to rest on a flat surface. To learn how to make a clay pot using a wheel, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 682,012 times.

      Reader Success Stories

      • Michelle Greenidge

        Dec 16, 2016

        "The fact that it was step-by-step was most helpful. I'm currently learning to make pots (very much a beginner) ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement