How to Make a Clay Pot by Wheel

PDF download Download Article
PDF download Download Article

Making a clay pot on a wheel is a little different than doing it freehand. It requires centering and anchoring the pot on the wheel first, and then using your hands to shape the pot as desired. Using a pottery wheel to make a pot takes practice and patience, so don’t worry if your first pot doesn’t turn out exactly how you hoped it would. Just keep practicing!

Things You Should Know

  • Tap on the clay mound in the center of the wheel to anchor it; if you don’t, the clay may fly off.
  • Keep your hands wet at all times to prevent the clay from sticking to your hands.
  • Apply gentle pressure to the sides of the clay while forming an indentation in the center to create the gap you’ll use to form the center of the bowl.
  • Take your time forming the walls of the pot and use both hands to craft the shape of your pot.
Part 1
Part 1 of 3:

Centering and Lubricating the Clay

PDF download Download Article
  1. Position the clay in the center of the wheel. If you are a beginner, then start with 2 pounds (0.91 kg) of clay. If you are more experienced, then you can use more clay, such as 3 pounds (1.4 kg). [1]
    • Remember that the more clay you use, the larger your pot will be.
  2. Watermark wikiHow to Make a Clay Pot by Wheel
    A low speed is all you need to anchor the clay and lubricate it. Switch the wheel on and keep it at the lowest speed possible. [2]
    • If you are a beginner, keep the speed low to medium while you work the pot. This will help to prevent the clay from getting off-centered.
    Advertisement
  3. Watermark wikiHow to Make a Clay Pot by Wheel
    While the wheel is spinning, tap the top and sides of the clay with the palm of your hand several times to ensure that it is centered. This will also help to secure the clay to the wheel base. [3]
    • You do not need to push down hard on the clay. Just tap it.
  4. Watermark wikiHow to Make a Clay Pot by Wheel
    Your hands need to be wet while you work a clay pot on the wheel or they will stick to the clay. Dip your hands in a bowl of water and keep this nearby for lubricating your hands as you work the pot. [4] [5]

    Make sure that you also lubricate the walls of the pot as needed while you are working it. If the clay starts to feel sticky, then dip your hands in water.

    5. Advertisement
Part 2
Part 2 of 3:

Creating the Center of the Pot

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot by Wheel
    Place your hands on the sides of the mound of clay near the bottom of the mound with your thumbs on top of the mound. Apply even pressure to the clay as the wheel turns.
    • Keep the wheel set to a low speed as you do this, or increase the speed slightly if you feel comfortable with a higher speed.
  2. Watermark wikiHow to Make a Clay Pot by Wheel
    As you apply pressure to the side of the clay, slowly move your hands up around the sides of the clay. The clay should start to form a cone with a flat top as you do this. [6]
    • You may increase the speed of the pottery wheel while shaping the cone, or keep it at a low speed.
    • Repeat this as many times as needed to mold the clay into the desired width and height.
  3. Watermark wikiHow to Make a Clay Pot by Wheel
    Once your clay is in the form of a cone, place 1 hand on top of the clay and start pressing down with light to medium pressure. Keep the other hand on the side of the clay to maintain the shape. [7]
    • Maintain an even wheel speed as you do this.
  4. Watermark wikiHow to Make a Clay Pot by Wheel
    Look at the clay from the top and locate the center. Then, press down with 1 thumb to form an indentation while the rest of your fingers stay outside of the clay to help maintain the desired shape. Use both thumbs to gradually widen the opening as the wheel turns while your fingers guide the clay on the outside of the bowl. [8]

    Make sure that you do not press all the way down to the base of the wheel. Leave 0.5 to 1 in (1.3 to 2.5 cm) of clay at the bottom for the base of the pot.

  5. Watermark wikiHow to Make a Clay Pot by Wheel
    The rim of the pot will be wide at this point, but you can use your fingertips to define the shape. Squeeze the clay around the top of the pot while the wheel is still turning. Keep doing this until the rim is the desired thickness. [9]
    • You may also use a chamois to compress the rim. Hold the chamois over the rim and press on it with your fingertips. This will help to remove excess moisture from the clay more efficiently, but it is optional.
    6. Advertisement
Part 3
Part 3 of 3:

Shaping the Walls of the Pot

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Pot by Wheel
    Insert 1 of your hands into the pot and position them near the bottom of the pot. Your fingers should be bent slightly to help you create the curve on the inside of the pot. Press the back (fingernail side) of your index and middle fingers against the inside of the pot and slowly move your hand up towards the rim. [10]
    • Don’t bend your fingers too much or your knuckles will create grooves in the pot. Try to create a curve with your hand to create the same type of curve on the inside of the pot.
  2. Watermark wikiHow to Make a Clay Pot by Wheel
    Position your other hand on the opposite side of where your hand is inside the pot. This is so that your hands can work together to shape the walls of the pot. Look down into the pot from above it to check the positioning. [11]
    • Try to curve your hand on the outside of the pot in the same way as the hand inside the pot.
  3. Watermark wikiHow to Make a Clay Pot by Wheel
    Press your hands together gently and slide them up towards the rim of the pot while the wheel is turning. Maintain even pressure and keep the pottery wheel turning at a low to medium speed. [12]
    • Repeat this as many times as needed to get the desired shape and wall width.
    • Make sure to wet your hands after each throw (upward movement) to keep the clay well lubricated.
  4. Watermark wikiHow to Make a Clay Pot by Wheel
    After you are finished with your pot, shut off the wheel. Then, use a wire to loosen the pot from the wheel by sliding the taut wire under the base of your pot right up against the wheel. Once the clay has come loose from the wheel, take the removable part of the wheel (bat) of its base, and use it to carry your pot over to a flat, dry surface. Tilt the bat slightly and use your hand to guide the pot onto the flat surface. [13]
    • You may want to put down some newspaper to protect your surface before placing the clay pot on it.
  5. Fire and glaze the pot to finish it. Once you have finished shaping your pot, you can fire it and glaze it. This is required for making the pot waterproof and more durable. A glaze also creates an attractive glossy finish on the pot. [14] You will need to use a kiln to do the initial bisque firing, and then apply the glaze and fire the pot again. [15]
    • You may also let your pot air dry, but keep in mind that the pot will not be waterproof if you let it air dry. Air drying can take several days to weeks depending on the size of your pot.
    • If you do not have a kiln, you could try visiting a local pottery studio and asking if they will fire and glaze the pot for you. They might be willing to do so for a fee.
    • Make sure you cover all of the pot with glaze except for the bottom. If you get any glaze on the bottom, your pot will stick to the shelf in the kiln. [16]
    • Follow the instructions on the glaze so you know how many layers to apply. [17]
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you make clay pots without a kiln?
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College.
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Expert Answer
    You will need to use a kiln to do the initial bisque firing, and then apply the glaze and fire the pot again. Glazing and firing the clay pot is necessary to waterproof it and make it more durable.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 2
  • Question
    But why I should wear odd clothes?
    Community Answer
    Simply so you do not ruin your good clothes.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 9
  • Question
    What are the materials needed ?
    Community Answer
    There is a list of materials at the end of the article above.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 9
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If at any time the shape of the clay starts to spread out more than you want it to or if you have other issues getting the desired shape, turn your wheel speed down to low. [18]
        Thanks
        Helpful 0 Not Helpful 0
      • Making pottery is messy, so make sure you are wearing clothes that you don’t mind getting a little dirty.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Clay
      • Pottery wheel
      • Bowl of water
      • Kiln
      • Glaze

      You Might Also Like

      How to
      Make a Silicone Mold
      17 of the Most Valuable Pottery and Porcelain Marks
      How to
      Bake Polymer Clay in a Conventional or Toaster Oven
      How to
      Harden Modeling Clay
      How to
      Make a Clay Person
      How to
      Color Air Dry Clay
      How to
      Soften Polymer Clay
      How to
      Revive Dry Clay
      How to
      Make DIY Clay Dolls at Home
      How to
      Drill a Clay Pot
      How to
      Dry Non‐Hardening Modeling Clay
      How to
      Make a Clay Volcano
      How to
      Make a Clay Pot
      How to
      Slab Clay
      Advertisement

      References

      1. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      2. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      3. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      4. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      5. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275
      6. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      7. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      8. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/Throwing-a-pot-Lakeside-Pottery-Tutorial.htm
      9. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275
      1. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275
      2. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275
      3. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275
      4. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/removing-pot-off-the-bat.htm
      5. ↑ https://www.thesprucecrafts.com/an-overview-of-the-firing-process-2746250
      6. ↑ Natasha Dikareva, MFA. Ceramics & Sculpting Instructor. Expert Interview. 5 May 2020.
      7. ↑ Natasha Dikareva, MFA. Ceramics & Sculpting Instructor. Expert Interview. 5 May 2020.
      8. ↑ Natasha Dikareva, MFA. Ceramics & Sculpting Instructor. Expert Interview. 5 May 2020.
      9. ↑ https://www.thesprucecrafts.com/throwing-pull-up-walls-of-pot-2746275

      About This Article

      Thanks to all authors for creating a page that has been read 129,568 times.

      Did this article help you?

      Advertisement