Download Article
Download Article
Some furniture looks like it’s made out of solid wood, but it's actually covered in a thin, wood-patterned paper called laminate. Even though it's not solid wood, you can still update your laminate furniture with a few coats of fresh paint. You'll just need to do some extra preparation before you get started. With a high-grit sandpaper and an oil-based primer, you’ll be ready to paint over the laminate on your furniture so it looks updated and new.
Steps
-
Take off any handles or knobs from the furniture. Put them in a plastic bag so you don’t lose them. If something won’t detach from the furniture, cover it with painter’s tape. -
Fill in dents in the furniture with a wood filler. You can find wood filler at your local hardware store. Let the filler dry per the instructions on the label. [1] X Research sourceAdvertisement -
Use a 120-grit sandpaper to lightly sand the furniture’s surface. [2] X Expert Source James Guth
Painting Specialist Expert Interview. 21 July 2020. Sand in circular motions until the surface of the furniture looks dull and less glossy. Don’t sand too much or you might tear up the laminate from the surface. [3] X Research source -
Wipe down the furniture with a damp cloth to remove any wood dust. Make sure the surface of the furniture is clean before you begin the priming process. [4] X Expert Source James Guth
Painting Specialist Expert Interview. 21 July 2020.
Advertisement
-
Lay down a tarp in a well-ventilated area. Move the furniture onto the tarp so no primer or paint gets on the floor. Use newspaper if you don't have a tarp. -
Apply a high-quality latex primer to the furniture’s surface. [5] X Expert Source James Guth
Painting Specialist Expert Interview. 21 July 2020. Look for primer at your local hardware or paint store. Apply the primer using a brush or roller until there’s an even coverage on the entire surface of the furniture. [6] X Research source- Use a spray can primer for an easier application.
-
Let the primer dry for at least four hours. After four hours, gently touch the primed surface with the tip of your finger to see if it’s fully dried. If the primer is still wet, let it finish drying. [7] X Research source -
Sand the primed surface with a 220-grit sandpaper. Lightly sand in circular motions like you did the first time you sanded the furniture. Wipe off any dust from the surface with a damp cloth. [8] X Research source
Advertisement
-
Use an acrylic latex paint. Decide whether you want your finish to be glossy or matte, and look for an acrylic latex paint with that finish. You can find acrylic latex paint at your local hardware or paint store. [9] X Research source -
Apply the first coat of paint using a brush or roller. Paint using short, even strokes going in the same direction. It’s OK if the first coat looks slightly patchy or uneven. [10] X Research source -
Let the paint dry for at least two hours. Some paints may take longer to dry, so check the label on the paint you’re using for specific drying instructions. After two hours check to see if the first coat of paint is dry using your fingertips. [11] X Research source -
Alternate between painting and drying until you get an even coverage. This could take between three to four coats of paint. Allow the furniture to dry for at least two hours between each coat. [12] X Research source -
Let the newly-painted furniture cure for a week. You can re-attach any handles or knobs to the furniture once the final coat is dry, but avoid setting anything on the furniture until it's cured for a week to prevent peeling. You can also add a paint sealer to the surface of the furniture after the last coat dries. [13] X Research source
Advertisement
Expert Q&A
Search
-
QuestionWhat kind of primer do you use on laminate furniture?James Guth is the co-owner and founder of Chesapeake Painting Services LLC. With over 20 years of experience, James specializes in exterior and interior painting, drywall, powerwashing, wallpaper, staining, sealing, and carpentry. James holds a BS in Economics and Business Administration with a concentration in Finance from Towson UniversityI would recommend using a high-quality latex or shellac primer, which will seal the surface and create a nice base for the paint.
-
QuestionWhy is the paint bubbling as I paint my primed laminate cabinets?Community AnswerBubbling paint might be a sign that you haven't sanded the laminate enough. Use a 120-grit sandpaper and gently sand the surface of the cabinets in a circular motion. Then re-try painting the cabinets.
-
QuestionI'm painting the bottom of a coffee table in egg shell and the top black. Which part should I do first?Community AnswerDo the bottom first. This way you can feel comfortable tipping the table to it's side or upside down so you can complete the bottom without scratching or marring the newly painted top. You should allow the paint to cure before placing anything on it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Filler
- Sandpaper
- Cloth
- Paint stirrers
- Primer
- Paint
- Paint brush
- Paint roller
References
- ↑ https://www.youtube.com/watch?v=dWJIJM3qmyQ&feature=youtu.be&t=8
- ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
- ↑ http://realitydaydream.com/the-difference-between-laminate-and/
- ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
- ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
- ↑ https://www.youtube.com/watch?v=auW3ejK8GsQ&feature=youtu.be&t=154
- ↑ https://www.youtube.com/watch?v=dWJIJM3qmyQ&feature=youtu.be&t=76
- ↑ http://vintagerevivals.com/2015/05/how-to-paint-a-laminate-dresser
- ↑ http://www.thecreativityexchange.com/2015/11/how-to-paint-laminate-furniture-and-get-a-smooth-finish.html
About This Article
Article Summary
X
To paint laminate furniture, start by sanding down the surface using 120-grit sandpaper so that the paint will stick better. Next, apply an oil-based primer with a brush or roller and wait 4 hours for it to dry. Once it’s dry, gently sand the surface with a 220-grit sandpaper. Then, apply a coat of an acrylic latex paint with a brush or roller using short, even strokes. Allow the paint to dry for 2 hours, then repeat the process with two more coats of paint. If you want to know how long to allow the paint to cure before using the furniture, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 682,630 times.
Reader Success Stories
- "I have laminated bedroom furniture, and would now like to paint it to match my new white headboard and side tables. Your information has been a great help." ..." more
Advertisement
96%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I have laminated bedroom furniture, and would now like to paint it to match my new white headboard and side tables. Your information has been a great help."
..."
more
"Very useful information. I'm keen to paint my laminate bedside cabinets now, but I've been to the DIY stores and find it hard to buy the laminate paint."
..."
more
"Thanks so much for answering all the questions I didn't even know to ask. Now I am ready to get started. Thanks again."
..."
more
"I'm planning on painting my desk to match my new room decor. This article clarified a few doubts I had. Thanks."
..."
more
"A very nice tutorial! I did not know that bubbles appear if furniture is inadequately sanded! Thank you."
