Download Article
Download Article
Low pH levels in a pool can be caused by rainwater and other foreign particles getting into the water. Corrosion of metal accessories, burning of the nose and eyes, and itchy skin are signs of low pH levels in a pool. Regular testing and chemical treatment help maintain pH levels. Soda ash (or sodium carbonate) is the most common way to raise pH levels.
Steps
-
Test the pool water's pH level with test strips. Get pH testing strips at your local pool store, big-box store, or order them online. Follow the product’s instructions, which are typically dipping the strip into the water and checking its color against the range listed on the product. [1] X Research source- Some pH test kits require you to fill a small tube with pool water and add drops which change color based on the pH.
-
Check the chemical levels one to two times per week. Record the pH level in a small notebook to track the change over time. The pH of your pool changes frequently due to many causes. This is why it's important to check often. Write the pH down in a notebook to track it as it changes over time.Advertisement -
Aim for a pH level of 7.4 to 7.8.. Test strips change color when exposed to water. The color corresponds to the pH level. Match the color to the package and you’ll find the current pH level. The ideal pH level for a pool is between 7.4 and 7.8. Determine how many points you need to raise the pH.- For example, the color of your test strip might show the yellow of a banana. According to your product, this means the pH level is 7.2. You’d want to raise the pH by a minimum of .2 and a maximum of .6.
Advertisement
-
Calculate the number of gallons (liters) in your pool. If you already know how many gallons (liters) your pool holds, use that number. If you need to figure out the number of gallons (liters), you’ll multiply the volume by a multiplier based on the shape of the pool. Use a measuring tape. [2] X Research source- For a rectangular pool, the formula is length X width X average depth X 7.5. If your pool has a deep end and a shallow end, measure the depth of each, add them, and divide by two to figure out the average depth.
- For a round pool, the formula is diameter X diameter X average depth X 5.9. If part of the pool is deeper, take the shallow depth plus the deeper depth and divide the number by two.
- For abnormally shaped pools, adjust these formulas to figure the gallons (liters) in each section, or ask a pool expert for an estimate on how many gallons (liters) your pool holds.
-
Figure out how much soda ash you need. Use about six ounces (170 g) of soda ash to raise 10,000 gallons (37854 liters) of water by .2 pH points. Start with this figure as a guide, and add more soda ash later if you need to raise the pH by more. [3] X Research source- For example, you test the pH of the water and it shows 7.2. You want to raise it to 7.6. Your pool holds exactly 10,000 gallons (37854 liters) of water. Use 12 ounces (340 g) of soda ash for the first round.
-
Buy the soda ash at a pool store or order it online. Soda ash may be labeled by many different manufacturer names. Look at the ingredients of the product and make sure sodium carbonate is the active ingredient. If you aren’t sure what to buy, ask an employee which products contain soda ash.- If you don’t have a pool store near you, check at a water treatment store, hardware store, or big-box store like Walmart.
Advertisement
-
Leave the pool filter on while you add the soda ash. Soda ash works best when it can circulate throughout the pool. To make sure this happens, run the pool filter on its regular circulation setting. If you’ve turned the filter off to clean the pool, turn it back on. -
Get a five gallon (19 liter) bucket and fill it with water. You don’t want to throw the soda ash directly into the pool because it won’t mix in evenly enough. Instead, dissolve it into water and spread that into the pool. If you don't have a five gallon bucket, any bucket will work. Mix the soda ash into at least one gallon (3.8 L) of water.- It's important to fill the bucket first and add the soda ash second.
-
Measure the soda ash into the bucket of water. Measure out the soda ash you need based on the amounts described above. Use a basic kitchen measuring cup or a scale to measure out the amount you need. Pour the soda ash into the bucket of water. [4] X Research source- Remember, don't put the soda ash into the bucket before the water.
-
Pour the soda ash water around the pool. For in-ground pools, walk around the perimeter, slowly pouring the water from the bucket into the pool. For above ground pools, pour it around the edge of the pool as best you can.- If you want, use an old plastic cup to scoop water out of the bucket and toss a cupful at a time into the pool.
-
Check the pH of the water after one hour. Give the soda ash time to circulate throughout the pool and alter the pH of the water. After one hour, grab another test strip and dip it into the water. See if the pH is in the range you need it to be. -
Add more soda ash as needed. You generally don’t want to add more than one pound (454 g) total of soda ash per 10,000 gallons (37854 liters) of water. If you add more than that, the water starts to become cloudy. [5] X Research source- If the pH isn’t where you want it to be, check it in a day or two and add more soda ash in the quantities you already figured.
Advertisement
Community Q&A
Search
-
QuestionBoth my pH and my alkalinity are very low. How do I increase them?Community AnswerAddress alkalinity first -- add whatever adjustment based on gallon count. Then do pH. Separate by a day: alkalinity first, wait a day, pH next, wait a day. Chlorine will be eaten so fast you'll never have free chlorine but it is because the base chemical balance is not stable. Number one cause: skim and vacuum using gravity or straight to waste. Scrub the liner with a brush, row the pool of round to a tornado, vacuum over edge again, skim anything solid out. All solids must be out of the water. Add algaecide - wait four to eight hours. Then shock with chlorine -- 2 full gallons. People have trouble with balance because they think chlorine will skim and vacuum for them.
-
QuestionCan I use baking soda to raise ph in my pool?Community AnswerThe simple answer is yes. Baking soda will raise the pH. However, you'll have to add much more than if you use soda ash.
-
QuestionWill high alkalinity cause the pH to be low?Community AnswerNo, it should cause the pH to rise, not lower.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Test strips also test for chlorine, alkalinity and calcium hardness. Keeping all chemicals in proper ranges can keep your pool water clean, sanitary, and safe.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://dengarden.com/swimming-pools/How-Much-Muriatic-Acid-Should-I-Add-to-a-Swimming-Pool-Understanding-pH
- ↑ http://www.inyopools.com/swimming-pool-calculations.aspx
- ↑ https://www.poolspanews.com/how-to/maintenance/soda-ash-vs-baking-soda_o
- ↑ http://www.backyardcitypools.com/Raising-pH.htm
- ↑ http://www.backyardcitypools.com/Raising-pH.htm
About This Article
Article Summary
X
To raise the pH of your pool, fill a 5 gallon bucket with water. Then, add 6 ounces of soda ash to the bucket for every 10,000 gallons of water in the pool. Pour that mixture around the pool’s perimeter while the filter is running so it mixes evenly. After an hour, check the pools pH. It should have gone up by 0.2 points. If you need it to be higher, repeat that process until you get the desired pH. For tips on testing your pool’s pH and chemical levels, scroll down . . .
Did this summary help you?
Thanks to all authors for creating a page that has been read 824,055 times.
Reader Success Stories
- "It helped clarify my understanding of a test strip indicating a need to increase pH. Most test strips have both pH and alkalinity. It seems confusing that you can adjust one independent of the other." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It helped clarify my understanding of a test strip indicating a need to increase pH. Most test strips have both pH and alkalinity. It seems confusing that you can adjust one independent of the other."
..."
more
"I needed to know how to raise the pH levels for my above ground pool, and you have helped me understand what this is all about, thanks."
..."
more
"All of them were very helpful. I used more than I expected. I even learned a thing or two, thanks!"
"It gave me a lot of knowledge about the usage of soda ash, especially the tips and information."
"What was stated is true and correct. I am attesting to these steps!"
