Download Article
Download Article
Sundials have been used to measure time, based on the Sun, for thousands of years. This simple device can be made up of nothing but a flat dial and a gnomon (the “pointer” that casts the shadow), but can still be tricky to read if you’re just starting out. By setting up your sundial correctly and completing a few simple calculations, you can synchronize your sundial to clock time and know the hour no matter where you are.
Steps
-
Place your sundial on a flat, horizontal surface. A sundial will only work correctly when it’s on a perfectly flat surface, like the ground, a stand, or a table. Place yours down in a safe spot where it won’t get knocked down or moved. [1] X Research source
-
Make sure your sundial will be in direct sunlight all day. This may seem obvious, but it’s crucial! If you want to be able to read your sundial from dawn to dusk, keep it out in an open, unshaded area where sunlight can reach it for as long as possible.
- You may notice that some sundials show only 12-hour measurements, since they won’t work for the hours that the sun is down.
Advertisement -
Point the gnomon north if you’re in the northern hemisphere. Use a compass or look for the North Star at night to find true north. Then, rotate the face of your sundial until the gnomon, or the pin of the sundial, is pointing straight north. [2] X Research source
- The 12:00 noon notation is aligned with the gnomon, so it will be pointing north as well.
-
Face the gnomon south if you’re in the southern hemisphere. If you live below the equator, you’ll need to point the gnomon of your sundial towards the south, rather than the north. You can use a compass or look for the Southern Cross constellation to find true south and adjust your sundial accordingly.
- To find the Southern Cross, look for 4 stars shaped like a small kite. The farther south you are, the higher it will be in the sky. [3] X Research source
-
Use a vertical sundial if you’re at the equator. The angle of the sun makes it very difficult to use a traditional horizontal sundial along the equator. Instead, use a vertical sundial and follow the packaging instructions to set it up and point the gnomon correctly. [4] X Research source
- At the equator, the sun rises along the eastern horizon and moves straight up, then sets on the western horizon. If you used a horizontal sundial, the shadow would fall mostly west in the morning and mostly east in the afternoon, instead of rotating slowly.
Advertisement
-
See where the shadow line falls on your sundial. Once you’ve set up your sundial, take a look at it when it’s casting a shadow in the sunlight. Note the line that the shadow’s outer edge lines up with and use it to read your sundial like a regular clock. [5] X Research source
- You might see different line denotations based on your sundials, but it should be split into even sections by 5 minutes or 10 minutes so you can get an accurate estimate.
-
Find the center longitude of your time zone. Your sundial can be off by up to an hour compared to clock time depending on your longitude. To fix this, first figure out how many hours you are ahead or behind Greenwich Mean Time (GMT), which is at 0° longitude. For every hour that you’re ahead, the center of your time zone will shift by 15° east; for every hour you’re behind, the center of your time zone will be 15° west. [6] X Research source
- For example, Pacific Standard Time (PST) is 8 hours behind GMT. Multiplying 8 hours by 15° gives you 120, so PST’s center longitude is 120° West.
- You can find the current GMT time by searching online.
-
Find the distance between|your longitude and the center of your time zone. You can find your own longitude by looking it up online or with a GPS device. Then, calculate the distance from your longitude to the central longitude of your time zone, and note whether you’re to the east or west of it.
- For example, Seattle is at 122.3° West longitude. The central longitude of its time zone (PST) is 120° West, so Seattle is 2.3° away from it.
-
Add or subtract 4 minutes for every degree away from the center. Now, use your calculation to get a more accurate estimation of the time from your sundial. Multiply the difference between your longitude and the central longitude by 4. If you live west of the central longitude, add your answer to the time; if you live east, subtract it. [7] X Research source
- In Seattle, for example, you’d multiply 2.3 by 4 to get 9.2. Since Seattle is west of the time zone’s center, sundials in Seattle are 9.2 minutes behind clock time, so you need to add 9.2 minutes to make them equivalent.
- If your sundial reads that it’s 1:40 pm in Seattle, then, you’d add 9 minutes to estimate that it’s 1:49 pm.
- Why 4 minutes? Since most time zones are 15° of longitude wide, or 1 hour long, you can divide 60 minutes by 15° to see that it takes about 4 minutes for the sun to move through 1 degree.
-
Add 1 hour if it’s Daylight Saving Time. You’ll need to adjust your time even more during Daylight Saving Time, which runs from early spring to mid-fall. Simply add 1 hour to your sundial’s time to match it to the clocks during this period. [8] X Research source
- Search online to see when Daylight Saving Time starts and ends in your region.
-
Calculate the Equation of Time to find the exact time. The length of one day varies slightly on any given day, which can add up to make your sundial’s time differ from clock time by as much as 15 minutes. If you want the most exact time estimate from your sundial, adjust your measurement using an Equation of Time table. Search for one online and either add to or subtract from the time as instructed. [9] X Research source
- Most calculators require you to enter in your year and longitude or time zone. The calculator will then give you a table telling your how to adjust your sundial time throughout the year.
Advertisement
Community Q&A
Search
-
QuestionCan a sundial tell time at night?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerNo—a sundial works by casting shadows that indicate the time based on the position of the sun. A sundial won’t work if the sun isn’t visible, so you can only use it during the day when it’s clear enough out for the sun to cast a shadow. However, there is a similar device called a moondial that you can use at night, tracking shadows based on the moon’s position.
-
QuestionHow accurate is a sundial?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerIt depends on how carefully the sundial is designed and oriented. Most of them aren’t truly accurate to within more than about 10 minutes.
-
QuestionWhat is a shadow clock?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA shadow clock is any kind of timepiece that tracks the passage of time using the movement of shadows, usually cast by sunlight. A sundial is the most common type of shadow clock. There are also moondials, which track shadows cast by the moon at night.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.youtube.com/watch?v=dcWdJYtvQf4
- ↑ https://alumnae.mtholyoke.edu/blog/how-to-use-a-sundial/
- ↑ https://www.space.com/15346-big-dipper-southern-cross-skywatching-guide.html
- ↑ https://files.eric.ed.gov/fulltext/EJ802706.pdf
- ↑ https://files.eric.ed.gov/fulltext/EJ802706.pdf
- ↑ https://alumnae.mtholyoke.edu/blog/how-to-use-a-sundial/
- ↑ https://alumnae.mtholyoke.edu/blog/how-to-use-a-sundial/
- ↑ https://alumnae.mtholyoke.edu/blog/how-to-use-a-sundial/
- ↑ https://files.eric.ed.gov/fulltext/EJ802706.pdf
About This Article
Article Summary
X
To read a sundial, first place the sundial on a flat surface in a sunny spot. Rotate the sundial so the gnomon, or the pin on the sundial that casts a shadow, is pointing north if you’re in the northern hemisphere or south if you’re in the southern hemisphere. Then, look where the shadow cast by the gnomon falls on the sundial. The number the shadow lines up with is what time it is. For example, if the shadow lines up with the 3 on the sundial, it’s 3:00 PM. If the shadow falls between two numbers, the time is somewhere between those two hours. For example, if the shadow falls halfway between the 8 and the 9 on the sundial, it’s 8:30 AM. Sundials typically only have 12 hours on them (the 12 daylight hours) since they can't be used at night. Keep in mind that the time on a sundial doesn’t change based on the time zone you’re in or daylight saving time, so the time you read on a sundial could be different from the time on your watch by a significant margin. To learn how to make your time even more exact or use a vertical sundial, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 250,336 times.
Reader Success Stories
- "I have a brass sundial that I bought years ago and refound trying to set it up in Southern Hemisphere. Had to find the leveler! Thank you." ..." more
Advertisement
"I have a brass sundial that I bought years ago and refound trying to set it up in Southern Hemisphere. Had to find the leveler! Thank you."
..."
more
"This site provided me with a lot of help for the time. Now I just need to find the right time!"
"Your article is helping our customers understand how to read a sundial. Thanks!"
"Something helpful to read my sundial compass from West London."
