A tuberculosis (TB) skin test is also known as the Mantoux tuberculin test. This test measures your immune system's response to the bacteria that causes tuberculosis. Your results will be interpreted by your doctor a couple of days after the test. If you're curious about how to read a tuberculosis skin test, this article will guide you through the process, but remember: the test must be read by a trained professional. You can interpret the test yourself, but the result needs to be documented by a medical professional to ensure proper treatment and/or follow-up.
Things You Should Know
- Leave your arm uncovered after the injection and return to your doctor within 72 hours for an official reading and documentation.
- Look for a hard, raised bump with definite borders over the injection site. Measure the diameter of the bump in millimeters.
- No bump means you’re negative. A bump over 15mm is a positive result for low-risk people (a smaller bump can be positive for higher-risk people).
Steps
-
Go to your doctor for a tuberculosis skin test. You will be given an injection of a purified protein derivative into the inner forearm that will result in a 6 to 10mm welt that will disappear within a few hours.
-
Leave your arm uncovered. Do not place a bandage over the test site for 48 to 72 hours or apply lotion to the area. You can wash and dry your arm carefully. [1] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
- Also, avoid scratching or rubbing the test area on your arm. This can cause redness or swelling that may cause the results to be misread. Apply a cold washcloth on your arm if it is itchy.
Advertisement -
Return to your doctor. The test must be read within 48 to 72 hours. [2] X Research source If you do not come back within 72 hours, the test is considered invalid and will have to be repeated. [3] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Find and mark the induration. Use your fingertips to find the induration. This is a hard, dense, raised formation with definite borders. If there is a firm bump, use a pen to mark the widest edges of the induration on the forearm.
- The only part that is important for your test results is the hard bump. The reddened area or any slight swelling does not count towards the size of the induration.
- You cannot always see the induration. You must find the induration with your fingertips.
-
Measure the induration. The test site may be red, but that does not mean you have TB. You have to measure the induration. This induration is measured across your forearm in millimeters. Use a ruler with millimeter measurements. Place the ruler's edge with "0" on the left edge of the raised bump where you marked it with a pen. Look where the mark made on the right side of the bump falls on the ruler.
- Use the lower measurement if the mark is between two different lines.
-
Determine if you’re in the high-risk group. An induration of 5mm or more is categorized as positive in individuals in the high-risk group. This group includes people who have:
- HIV
- Received organ transplants
- Been immunosuppressed for various reasons
- Recent contact with a tuberculosis (TB) positive person
- Chest x-ray consistent with old healed TB
- End stages of renal (kidney) disease [4] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
-
Determine if you’re in the moderate-risk group. An induration of 10mm or more is categorized as positive in people in the moderate-risk group. This includes people who:
- Immigrated recently from a country with widespread TB
- Use injection drugs
- Work in healthcare settings, prisons, nursing homes, or other similar areas
- Have clinical conditions that put them at risk (diabetes, leukemia, low body weight)
- Are children under age 4
- Are children and adolescents exposed to high-risk adults
-
Look for a large induration if you’re not in these risk groups. An induration of 15mm or more is considered positive for those not in the high or moderate-risk groups. This includes all individuals, regardless of any risk factors they might have. The test is also considered positive if there are blisters present, even if there is a little swelling. [5] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
-
Look for a negative result. If there is no firm bump, the result is negative. If there is soft swelling or redness but no noticeable hardened bump that can be felt at the site, it is a negative. [6] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
- Even if you believe your skin test is negative, you must return to the doctor to have it professionally read.
Expert Q&A
-
QuestionWho can read a Mantoux tuberculin skin test?Dr. Ziadie is a board certified Pathologist in South Florida. She specializes in renal, transplant, and pediatric Pathology and has over 12 years of experience. She earned her medical degree from the University of Miami School of Medicine in 2004 and completed her fellowship in Pediatric Pathology at Children’s Medical Center in 2010.Anyone following the proper instructions can interpret a Mantoux TB skin test. However, for the test to be medically valid, a licensed medical professional must interpret the test within the appropriate time frame (48 to 72 hours after administration).
-
QuestionIf my arms blisters, does that mean I'm positive?Dr. Ziadie is a board certified Pathologist in South Florida. She specializes in renal, transplant, and pediatric Pathology and has over 12 years of experience. She earned her medical degree from the University of Miami School of Medicine in 2004 and completed her fellowship in Pediatric Pathology at Children’s Medical Center in 2010.No. A small bump or blister will appear after having the test and this is normal. It will go away within a few days. A positive test is small hard bump at the site of the injection when you go to have the test read.
Video
Tips
- Go to any further testing your doctor might order if the test is positive or if the test is considered borderline positive.Thanks
Warnings
- A TB test should always be interpreted by a trained health professional within the 72-hour time span. These professionals receive training and practice to measure the results correctly.Thanks
- False positives and false negatives can happen with this test. If you have any questions about your tuberculosis test results, consult your doctor as soon as possible.Thanks
References
- ↑ https://www.cdc.gov/tb/publications/factsheets/testing/pdf/skinTestingInformation-508.pdf
- ↑ https://www.dshs.texas.gov/tuberculosis-tb/tb-education-training-resources/frequently-asked-questions-about#test
- ↑ https://www.cdc.gov/tb/testing/blood-test.html
- ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3481914/
- ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3481914/
- ↑ https://www.cdc.gov/tb/hcp/testing-diagnosis/tuberculin-skin-test.html
About This Article
To read a tuberculosis skin test, start by going to the doctor for a test, which involves an injection that will cause a welt on your arm. If the welt is a soft bump, the results are likely negative. However, if it's a hard, dense, raised formation, the results may be positive. Regardless of your results, make sure to return to your doctor within 48 to 72 hours after the initial injection to have your results interpreted. To tell whether you have TB by measuring your welt, keep reading!
Reader Success Stories
- "I just had my annual Mantoux test today and thought it looked different from previous years. It is wider and bruising slightly. The article explained what I should be concerned about and all is well for the time being." ..." more