How to Remove Bloodstains from Clothing

Co-authored by Susan Stocker

Last Updated: July 23, 2024 Approved

Blood stains on clothing are typically unexpected and can be frustrating to remove. A blood stain should be removed carefully to avoid damaging the clothing. Hot water or chemicals that are not appropriate for fragile fabrics should be avoided. Tackling the stain as soon as possible and using ingredients such as soap, salt, hydrogen peroxide, or ammonia will help restore your clothing to its original state.

Method 1

Method 1 of 4:

Using Soap and Water

Download Article

1
Wet the stain with cold water. Blot a small stain with cold water to make sure it doesn’t run. You can also run it under a faucet of streaming cold water. If the stain is large, submerge it into a bowl or basin of cold water. ^{[1]
X
Research source}
- Do not use warm or hot water. This will make the stain worse.
- If the stain does run, you will need to treat the run as part of the stain.
You can use regular hand soap or bar soap for this. Lather the stain gently by rubbing it with a sponge. Then, rinse the soap out in cold water. Reapply soap and repeat the process if needed. ^{[2]
X
Research source}

Advertisement
If you see that the stain has let up, you can wash it as normal. Make sure to wash it alone. Use the same detergent as you normally would. Do not, however, use warm water on the washing machine cycle. ^{[3]
X
Research source}
4
Let the clothing air dry. The heat from a tumbler dryer can prevent the stain from fading completely, so do not put the clothing in the dryer. Instead, hang it up so that it can air dry. Once it is dry, you can store the clothing away or wear it. Repeat the process or try another method if the stain hasn’t faded completely. ^{[4]
X
Research source}
- Do not iron the clothing if the blood stain is still visible.

Method 2

Method 2 of 4:

Cleaning with a Salt Solution

Download Article

Try to get some of the stain out by rinsing it in cold water. Blot the stain with cold water and a towel. Or, you can run the stain under cold water.
Mix one part cold water and two parts salt together to create a paste. The amount of water and salt you need depends on the size of the stain. Do not mix so much water with the salt that you’ve created a liquid. The paste should be spreadable.
You can use your hand or a clean cloth to apply the paste to the stain. Rub the paste gently over the stain. You should begin to see the stain let up.
Once most or all of the stain has come out, run the clothing under cold water. Rinse it until the paste has been removed. If most of the stain hasn’t come out, reapply the paste.
Use whatever detergent you normally would for that particular piece of clothing. Do not, however, use anything but cold water to wash the piece of clothing. Hang up the clothing to air dry once it has finished washing.

Method 3

Method 3 of 4:

Using Hydrogen Peroxide

Download Article

1
Test the hydrogen peroxide on a small spot of the clothing. Hydrogen peroxide can bleach some fabrics, so it is important to test it on a small, hidden spot of the clothing before use. Use a Q-tip or pour a very small amount, and use another method if you see discoloration. ^{[5]
X
Research source}
- Hydrogen peroxide helps to remove blood stains from fabric.
- However, you should rinse thoroughly with water after using it. Otherwise, it will bleach the area.
Pour 50% hydrogen peroxide and 50% water into a container. You can test this solution on a piece of the clothing if you’re not sure it has been diluted enough. ^{[6]
X
Research source}
Make sure you pour the hydrogen peroxide only on the stain and nowhere else on the fabric. You will see it begin to foam up when it is working. Rub the hydrogen peroxide in with your hands to make sure it saturates the stain. ^{[7]
X
Research source} .
One application of hydrogen peroxide may not do the trick, especially if it is a large stain. Apply more hydrogen peroxide if the first application does not fade or remove the stain. Wipe the stain between each application. ^{[8]
X
Research source}
Once the stain has been removed, rinse it under cold water. You can then choose to wash it in the washing machine or leave it as is. Either way, allow the clothing to air dry. ^{[9]
X
Research source}

Method 4

Method 4 of 4:

Removing Stains with Ammonia

Download Article

Ammonia is a strong chemical and should only be used on tough stains. Do not use this method on delicate fabrics like silk, linen, or wool. ^{[10]
X
Research source}
2
Let the ammonia sit on the stain for a few minutes. Pour the diluted ammonia over the stain. Make sure the ammonia is only on the stain and nowhere else on the article of clothing. Allow it to sit for a few minutes. ^{[11]
X
Research source}
- If you get ammonia on an unstained portion of the fabric, rinse it and start the process over again.
You should see the stain let up after a few minutes. At this point, rinse the stain under cold water. The stain should be gone, but if not, repeat the process. ^{[12]
X
Research source}
Wash the clothing in the washing machine as you normally would. Make sure, however, to use cold water. If the stain isn’t completely gone, you can use an enzyme detergent that is made for breaking down tough stains in place of your regular detergent. ^{[13]
X
Research source}
Heat sets stains, so do not put the clothing in the dryer after washing it. Allow it to air dry. Then, store it as usual. If the stain is still there, repeat the process or try another method.

Video

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Reader Videos

Tips

For dry stains, apply toothpaste to the stain. Let it sit for a few minutes and then rinse it under cold water. ^{[14]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
The enzymes in saliva can break down blood. Apply saliva to the stain, let it sit, and then rub it out. ^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Many standard washing powders now contain enzymes which help to dissolve blood stains.

Thanks
Helpful 9 Not Helpful 4

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Keep in mind that blood will still show up under a black light when certain chemicals are applied.

Thanks
Helpful 35 Not Helpful 5
Try to avoid using hot water at all costs. Applying heat to the garment will make the blood permanently set in.

Thanks
Helpful 37 Not Helpful 14
Don't use tenderizer or other enzymes on products like wool or silk since these products might break down the fibers.

Thanks
Helpful 8 Not Helpful 3
Always wear protective gloves while handling blood stained areas. Safe preventative measures will eliminate any possibilities of infection to yourself of blood borne diseases.

Thanks
Helpful 2 Not Helpful 2

Things You'll Need

Soap and Water

Cloth (for blotting)
Bar of soap
Cold water
Laundry detergent

Salt Solution

Salt
Cold Water
Towel
Laundry detergent

Hydrogen Peroxide

Hydrogen peroxide
Cold Water
Laundry detergent

Ammonia

Ammonia
Cold Water
Laundry detergent

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

Log in

How to Remove Bloodstains from Clothing

Steps

Using Soap and Water

Cleaning with a Salt Solution

Using Hydrogen Peroxide

Removing Stains with Ammonia

Video

Expert Q&A

Reader Videos

Tips

Warnings

Things You'll Need

Soap and Water

Salt Solution

Hydrogen Peroxide

Ammonia

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories