PDF download Download Article PDF download Download Article

Any number of accidents can cause blood stains on your walls. The stains can be alarming, and making them disappear presents a special challenge. With a solid plan and a few common cleaning materials, though, you will be able to make your walls look as good as new.

Method 1
Method 1 of 3:

Cleaning Blood Off Any Surface

PDF download Download Article
  1. [1] Blood stains will set over time and may seep into deeper layers of your wall, making them more difficult to remove. If possible, clean up a blood stain as soon as it occurs.
  2. If the blood is still wet, use a cloth or paper towel to soak it up. If it is dry, see if you can gently scrape it from the wall, using a plastic putty knife or similar tool. Be careful, though, not to scrape the wall surface. [2]
    • Wet old stains gently with water. [3]
    Advertisement
  3. [4] Use soft clothes or paper towels, not abrasive sponges. [5] Begin by trying to clean the stain with water. If that doesn’t work, move on to detergent, and then to stronger cleaners or specially-designed stain products.
  4. Wear gloves and use a disinfectant. Be especially cautious when handling blood stains or spills of unknown origin. While getting ill from cleaning a blood stain, especially an old one, is very unlikely, it’s better to be safe.
    • Use freshly diluted bleach or a disinfectant that is registered with the Environmental Protection Agency or similar body and is labeled for use with potential blood-borne pathogens such as HIV, HBV, or HCV.
    • If the spill occurs in a public facility, such as a school, prison, or hospital, consult and follow the facility’s procedures for cleaning up bodily fluids.
  5. Advertisement
Method 2
Method 2 of 3:

Cleaning Blood Stains Off Painted or Papered Walls

PDF download Download Article
  1. While vinyl wallpaper holds up the best to cleaning, any wallpaper will start to separate from the wall if too much water or force is applied. Avoid cleaning over seams if possible. [8]
  2. [9] Add a tablespoon of ammonia to make a stronger solution. [10] [11]
  3. Wring out any excess water, to ensure that the cleaning cloth is not dripping wet. [12] Then, gently rub the stain, repeating as necessary.
  4. Rub it gently over the stain. Rinse off with clean water and dry the area with a soft cloth. [13]
  5. [14] Allow the solution to sit for a short period, being careful to wipe up any drips. Scrub very gently, then rinse with clean water.
  6. These are products containing enzymes design to digest blood or other bodily fluids that contain protein. [15] Follow the directions on the bottle, being extra careful to test the product’s effect on your wall surface before starting.
  7. Be careful not to leave any cleaning solution on the wall after cleaning. Even if this attempt wasn’t successful, be sure to dry the area thoroughly to avoid damaging the paint or paper.
  8. If you can’t get a blood stain off a painted wall, you will need to repaint. If you painted recently, you can repaint just the stained area. However, if a lot of time has passed, you may need to repaint the whole wall. Be sure to use a primer first directly over the stain. Some primers are specially designed to cover stains well; read the labels to choose the best one. [16]
  9. Cut a patch large enough to cover the stain and tape it over the stained area, matching the pattern as closely as possible. Use a razor knife and straight edge to cut through both layers of paper. Remove the patch, setting it aside, and carefully remove the stained paper underneath, cleaning up any backing left behind. Then insert the patch, following the directions for the type of paper and paste you are working with. Adjust the patch to align the pattern and smooth with a damp sponge.
  10. Advertisement
Method 3
Method 3 of 3:

Cleaning Blood Stains Off Tiled Walls

PDF download Download Article
  1. Scrub the stain using a sponge. An ordinary bathroom sponge should not be abrasive enough to scratch tile, but proceed cautiously and test in an inconspicuous spot. Rinse all of the scouring agent off with clean water when done.
    • You may also make your own tile and grout cleaner by mixing ½ cup baking soda, 1/3 cup ammonia, ¼ cup white vinegar, and seven cups of water. Combine in a spray bottle, mix thoroughly, and spray onto the stained area. [17] Scrub and rinse.
  2. Scrub gently with a sponge. Rinse with water and be sure to soak up any excess cleaner.
  3. Follow the directions on the label closely, as these products can be toxic.
  4. Soak the towel with liquid dishwashing detergent and a small amount of water. Allow the mixture to sit on the stain for thirty minutes, then wipe away. Rinse and dry. [18]
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Does vinegar clean up blood?
    Guy Peters
    House Cleaning Professional
    Guy Peters is the Owner of MOP STARS Cleaning Service, a complete house cleaning service for residential and commercial clients, based in Denver, Colorado. Founded in 2014, MOP STARS provides regular, move in/out, deep, and commercial cleaning services. Guy has a BA in Finance from the California State University - Sacramento and an MBA from Cornell University.
    House Cleaning Professional
    Expert Answer
    Sure! A combination of baking soda and vinegar is a great option to clean dried blood! Add an even layer of baking soda over the blood and scrub it with a toothbrush soaked in vinegar. Then, wipe away with a dry cloth.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      About This Article

      Article Summary X

      If you’ve had an accident that has left bloodstains on your walls, all you’ll need are some common cleaning materials to make them look as good as new. For tiled walls, use a sponge to scrub a scouring agent onto the stain. You can also make your own tile and grout cleaner by mixing baking soda, ammonia, white vinegar, and water. If you don’t have these ingredients handy, try soaking hydrogen peroxide, diluted bleach, or white vinegar into the stained grout, scrub it gently with a sponge, then rinse it with water. For painted or papered walls, try making a mixture of water and liquid dishwashing detergent. Dip a rag or sponge into the solution and gently rub the stain. You can also try rubbing the stain with a paste of baking soda and water. To learn how to use an enzyme product to remove blood stains, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 222,588 times.

      Reader Success Stories

      • Maureen Martin

        May 18, 2020

        "Just used soft micro cloth with cold water - gently applied to surface of wallpaper - although blood from cut ..." more
      Share your story

      Did this article help you?

      Advertisement