Download Article
Download Article
As their name implies, one-way screws are designed to be screwed into a surface and never removed. The left-hand sides of the screw heads are curved, so they cannot be extracted with a regular screwdriver. You can remove one-way screws by twisting the head counterclockwise with a pair of pliers, or by using a specialized removal tool. Use the removal tool if the pliers can't loosen the one-way screw. If neither of these options works, you’ll need to drill through the screw head in order to extract the shaft.
Steps
-
Loosen the one-way screw with a flat-head screwdriver. If you’re lucky and the one-way screw is very loose, you may be able to unscrew it slightly using a regular screwdriver. One-ways screws come in sizes from #6 to #14, so you’ll need to use the corresponding size regular screwdriver to loosen it. [1] X Research source
- Most screwdrivers will have their size number printed on the handle. Hold the head of the screwdriver up to the one-way screw head until you find a size match.
-
Flatten 2 opposing sides of the screw head with a file. Scrape a hand-held file back and forth across 2 opposite sides of the screw head. The abrasive file will flatten 2 portions of the round screw head. This will allow your pliers to have a firm grasp on the flattened portions of the screw. [2] X Research source
- If you don’t file flat portions into the screw head, your pliers may just slip off when you try to remove the screw.
Advertisement -
Fasten a pair of locking pliers around the screw head. Take a small pair of locking pliers and squeeze the pincers snugly around the head of the one-way screw. Twist the small knob at the base of 1 of the pliers’ arms until the pliers are set to lock at the exact diameter of the screw head. Then, squeeze down on the handle so that the pliers clamp shut around the screw head. [3] X Research source
- Purchase locking pliers at a local hardware store.
- These pliers are called “locking” because one of the arms contains a knob which, when turned, sets how far the pliers can open. The other arm contains a bar that, when clenched against the arm of the pliers, will “lock” the head of the pliers in place.
-
Unscrew the screw by slowly twisting the pliers counterclockwise. Once you have a good grip on the screw head, rotate the screw head to the left to loosen the screw threads. Once you’ve made 6-7 complete rotations, you should see the threaded body of the screw emerge from the hole. [4] X Research source
- If the screw slips out from the head of the pliers, simply put the pliers back in place and continue unscrewing.
- If the screw continues slipping out from the pliers, place a rubber band around the head of the screw. Then try to use the pliers again. The rubber will help the pliers better grip the screw. [5]
X
Expert Source
Lui Colmenares
Licensed Contractor Expert Interview. 18 August 2020.
Advertisement
-
Purchase a one-way screw extractor tool from a hardware store. [6] X Expert Source Lui Colmenares
Licensed Contractor Expert Interview. 18 August 2020. Removal tools look like a typical screwdriver but have 2 steel pins located at their end. One-way screw removal tools come in different sizes based on the size of the screw itself. Common extractor tool sizes include sizes for #6-8 size screws, for #10-12 size screws, and for #14-16 size screws. So, you’ll need to find the size of the screw and purchase the removal tool that corresponds to that size. [7] X Research source- One-way extractor tools may be difficult to find. If they’re not in stock at your local store, try to find a tool through major online retailers or at large home-goods supply stores.
- A extractor tool costs about $25 USD.
-
Set the tool’s steel pins against the rounded edges of the screw head. Hold the tool as if you were holding a typical screwdriver, and set its pins in the open slot on top of the screw’s head. It should fit into position against the screw head’s rounded sides. [8] X Research source
- Keep in mind that, while they’re a useful tool, extractor tools are not guaranteed to work.
- For example, if the screw was driven into wood or screwed in with a power driver, you probably will not be able to remove it with the extraction tool. Try drilling through the head to remove the screw.
-
Turn the extractor tool counterclockwise to remove the one-way screw. Press the 2 steel pins forward into the screw head while you’re twisting. As you’re twisting the extractor, you’ll need to maintain substantial pressure on the handle to keep the extractor tool from slipping out of the screw head. [9] X Research source
- Once you’ve extracted the screw head by about 1 ⁄ 2 inch (1.3 cm), you may be able to grab it with your fingers and finish unscrewing by hand.
Advertisement
-
Select a drill bit that’s ¼ the diameter of the screw head. This will ensure that the drill bit is roughly the same diameter as the screw shaft. [10] X Research source You can use this drill bit to drill through the screw head and down to the shaft of the screw. This method will destroy the head of the screw, but is effective at removing the screw. [11] X Research source
- If you don’t have a power drill and drill bits, you can purchase them at a local hardware store. [12]
X
Expert Source
Barry Zakar
Handyman Expert Interview. 16 July 2020.
- If you don’t have a power drill and drill bits, you can purchase them at a local hardware store. [12]
X
Expert Source
Barry Zakar
-
Drill counterclockwise into the center of the one-way screw. Position the center of the drill bit over the middle of the screw head, and begin drilling straight into the screw. [13] X Research source Be sure that you’re drilling counterclockwise. Most drills have a switch you can flip to alter the direction that the drill bit rotates.
- This process is messy and will leave a pile of metal shavings below the spot where you’re drilling.
-
Continue drilling counterclockwise until the bit is 1 ⁄ 4 inch (0.64 cm) deep. The idea is to keep drilling until the drill bit passes through the screw head and into the part of the screw that has threading. Since you’re drilling counterclockwise, the drill bit will catch the screw threads and begin to extract the screw. [14] X Research source
-
Remove the screw shaft with locking pliers. Take a pair of locking pliers, and fasten them securely around the top of the screw’s shaft. Turn the screw counterclockwise so that it begins to loosen. Continue unscrewing the shaft until you can fully withdraw it from the hole. [15] X Research source
- Clean up any mess made from drilling once you’ve extracted the screw.
Advertisement
Expert Q&A
Search
-
QuestionHow do I remove a one-way tamper-proof screw?Lui Colmenares is a Licensed Home Improvement Contractor and Handyman for Mr. Handy NYC based in New York City, New York. Lui is trained and educated as an industrial engineer and specializes in carpentry, painting, and general handyman work such as mounting TVs, doorknob and deadbolt installation, furniture assembly, tile repair, and grouting. Mr. Handy NYC prides itself on quality work performed with speed, skill, and punctuality.There are tools to do this. However, you can take a wide rubber band and put it on the head of the screw. Then, use a bit that will fit the groove of the one-way screw. The rubber should help you remove the screw, since it increases your grip on it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- You can find removal kits in hardware stores with different size bits for different screws. These kits come with specific instructions that must be followed carefully to avoid issues. [16] X Expert Source Barry Zakar
Handyman Expert Interview. 16 July 2020.Thanks - One-way screws are also often called “security screws,” because of the difficulty in removing them.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
Locking Pliers
- Flat-head screwdriver
- Hand-held file
- Locking pliers
Extractor Tool
- One-way screw extractor tool
Drill Extraction
- Power drill
- Drill bits
- Locking pliers
References
- ↑ https://mitadmissions.org/blogs/entry/four-ways-to-unstrip-a-screw/
- ↑ https://mitadmissions.org/blogs/entry/four-ways-to-unstrip-a-screw/
- ↑ https://www.youtube.com/watch?v=_o0WIZMAgok&feature=youtu.be&t=2m44s
- ↑ https://www.youtube.com/watch?v=_o0WIZMAgok&feature=youtu.be&t=3m15s
- ↑ Lui Colmenares. Licensed Contractor. Expert Interview. 18 August 2020.
- ↑ Lui Colmenares. Licensed Contractor. Expert Interview. 18 August 2020.
- ↑ https://www.naturalhandyman.com/iip/inffastener/infoneway.html
- ↑ https://www.naturalhandyman.com/iip/inffastener/infoneway.html
- ↑ https://www.naturalhandyman.com/iip/inffastener/infoneway.html
- ↑ https://www.naturalhandyman.com/iip/inffastener/infoneway.html
- ↑ https://www.youtube.com/watch?v=NdMTVQxIBHA&feature=youtu.be&t=20s
- ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
- ↑ https://www.youtube.com/watch?v=NdMTVQxIBHA&feature=youtu.be&t=26s
- ↑ https://www.youtube.com/watch?v=NdMTVQxIBHA&feature=youtu.be&t=42s
- ↑ https://www.youtube.com/watch?v=NdMTVQxIBHA&feature=youtu.be&t=52s
- ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
About This Article
Article Summary
X
To remove one-way screws, try using a metal file and locking pliers. All you need to do is flatten 2 opposite sides of the screw head with your file. Once they’re flatter, you can grip the screw head with locking pliers and slowly unscrew it. Alternatively, use a power drill and locking pliers. For this method, you’ll need to use a drill bit ¼ of the size of the screw head so it can fit inside the screw shaft. Just switch your drill to counterclockwise rotation and drill right down the center of the screw. As the drill bit catches on the screw’s threads, it will start to extract the screw. When enough of the shaft is visible, use locking pliers to grip the screw and unscrew it the rest of the way. For more tips, including how to use a one-way screw extractor tool, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 200,210 times.
Advertisement
