If you've been in a woodworking or metal shop, you've probably seen a Dremel. The Dremel multitool is a handheld rotary tool that uses a variety of attachments and accessories. You can use a Dremel tool on wood, metal, glass, electronics, plastic, and many other materials. Dremel tools are very useful for arts and crafts projects and small home repairs, and are excellent for working in small or hard-to-reach spaces. [1] Once you learn the basics and try your Dremel out on a few projects, you'll quickly come to appreciate this versatile tool.

Things You Should Know

  • Choose the Dremel model that fits your needs. Read the owner’s manual, wear proper safety gear, and ensure the tool is switched off before you plug it in.
  • Use the Dremel tool for small cuts and detailing. Secure the object and cut at a speed safe for the material; practice cutting both plastic and metal with the tool.
  • Attach a grinding stone to the Dremel to grind materials, or use a sandpaper bit to sand something down. Fit the Dremel with a polishing bit to polish a surface.
Part 1
Part 1 of 3:

Learning the Basics

PDF download Download Article
  1. Dremel was one of the first companies to manufacture rotary tools, and it is still best known for these tools. Dremel also produces a number of other types of tools, including powered screwdrivers and scroll saws. Research which tools they're currently selling to find one that fits your needs. The price range varies so it's especially important to find out if you're getting the right tool. Options on Dremels include: [2]
    • Fixed or cordless models
    • Lightweight and mobile, or sturdier and stronger
    • Longer battery life
    • Fixed speed (usually cheaper and easier to use) or variable speed (better for intricate grinding projects and more expensive)
  2. Your Dremel will come with a variety of drill bits and other attachments, the tool, and an owner's manual. Be sure to read the manual before using your Dremel for the first time. This will also help you become familiar with the controls. Find out where the speed controls, on/off switch, and button to change the bit are located. [3]
    • Since your model may be different than a previous year's model, it's important to read the manual that came with your tool.
    Advertisement
  3. Always wear work or rubber gloves when you run the Dremel. Gloves will keep your hands safe from debris and sharp edges. You should also wear safety glasses, especially when cutting, polishing, or grinding with the Dremel.
    • Keep your work space clean. You should also keep children and other people away while you're operating the tool.
  4. To insert a bit, place the bit into the hole at the end of the Dremel and back it out slightly. Tighten the collet nut so that the bit is secure and doesn't wiggle. To remove the bit, press down on the shaft lock button while turning the collet. This should loosen the bit so you can replace it. [4]
    • Make sure to practice inserting and changing the bit when the Dremel is turned off and unplugged.
    • Some models are equipped with collets designed for quick and easy connection and release.
    • You can also get collets in different sizes for use with different sized accessory shanks.
    • In some cases, you will need to use a mandrel, a type of shank with a threaded head. This is a type of permanent shank for use with polishing, cutting, or sanding bits.
    Practice inserting bits before turning it on. "I used to just shove bits in, turn it on, and hope for the best. After reading this, I started practicing putting bits in and taking them out with the Dremel unplugged first. It really helped me get the hang of changing them quickly and securely." - Laurence X.
    Follow speed recommendations for materials. "I was using the same speed for everything. Then I burned out a bit, trying to cut metal at too high a speed. Now, I check the manual for each material's recommended speed range. My projects turn out much smoother." - Joyce S.
    Grind notches and corners with the right tip shapes. "I used to just use the same grinding tip for everything. After reading about using flat discs for notches and inside corners and cylinder and triangle shapes for rounds, my grinding projects fit together perfectly now." - Lindsay K.
    Polish metal better with a polishing compound. "I could never get metal to shine up well, even with the polishing tips. Using a polishing compound first made all the difference — I get a nice mirrored finish on metal now." - Keith S.
    Did you know that wikiHow has collected over 365,000 reader stories since it started in 2005? We’d love to hear from you! Share your story here .
  5. You should choose your bit attachment based on the type of material you'll be working with. Dremel makes many bits with a variety of materials for almost any material. [5] For example, for:
    • Carving and engraving jobs: use high speed cutters, engraving cutters, structured tooth carbide cutters, tungsten carbide cutters and diamond wheel points
    • Routing jobs: use router bits (straight, keyhole, corner, or groove). When using a router, take care to only use router bits.
    • Small drilling jobs: use drill bits (purchased individually or as a set)
  6. Once you plug it in, turn it on to the lowest setting and practice switching to different speeds.
    • To get a feel for the Dremel, try using different grips to hold the tool. For intricate jobs, you might want to hold it like a pencil. Or, for a larger job firmly grip the tool so that your fingers wrap around it.
    • Use clamps or a vice to secure the material you are working on.
    • Check your user's manual to determine the correct speed for the job you have in mind.
  7. Remove the bit and place the bits back in the case. Take the time to wipe down the drill with a cloth after each use. Keeping your Dremel clean will significantly extend the life of the tool. Consult the owner's manual before disassembling the tool for major cleanings.
    • You will need to frequently use compressed air to clean out the Dremel's air vents. This will help prevent electrical failure.
  8. Advertisement
Part 2
Part 2 of 3:

Cutting With the Dremel

PDF download Download Article
  1. The Dremel is lightweight and easy to maneuver, making it deal for small detailing and little cuts. [6] It can be difficult to give smooth, long curves, because you're mostly working free hand. But, you can make several straight cuts to get the kind of edge you're looking for and then even up the edge with the sanding bit.
    • Avoid using the Dremel for long or large cuts that would be better suited to a larger saw.
  2. Depending on the object or material you're cutting, secure the object with a vise or clamps. Do not hold the material you're cutting in your hand.
  3. A speed that is too high or too low can cause damage to your motor, the bit, or the material you're working on. If you're not sure, check your owner's manual to see what speed is recommended for your particular Dremel and material.
    • If you're cutting thicker or tougher material, make several passes to cut it. If the material is too hard and thick to cut without difficulty, you may need to use an oscillating saw rather than a Dremel.
    • If you see smoke and discoloration, your speed is too high. If you hear the sound of the motor dropping or slowing down, you may be pressing too hard. Lighten the pressure and readjust the speed.
  4. Fit a flat saw blade onto your Dremel. Remember to put on eye and ear protection before you begin cutting the plastic. Set the speed between 4 and 8 so you have enough power, but don't burn out the motor. Sand any rough edges once you've made the cuts. [7]
    • Avoid pressing down too hard while cutting, which can damage your Dremel and your bits.
    • Depending on your project, it may be helpful to draw an outline of your cuts onto the plastic. This will make it easier to ensure your cuts are where you want them to go.
  5. Secure a metal cutting wheel onto your Dremel. Put on eye and ear protection before you start cutting. Turn on your Dremel and set the power between 8 and 10. Make sure the metal you're cutting is affixed firmly in place. Gently touch the Dremel to the metal for a few seconds at a time until you see the metal being cut. You'll also see sparks fly. [8]
    • Fiber reinforced disks are more durable than ceramic disks, which can shatter when cutting metal.
  6. Advertisement
Part 3
Part 3 of 3:

Grinding, Sanding, and Polishing

PDF download Download Article
  1. For grinding, attach grinding stones which can be fixed to the mandrel/shaft. Slide the grinding stone into the front of the tool where it is fully inserted and tighten. Turn your Dremel on and grind on a low setting so you don't overheat the material. Gently hold the grinding stone against the material until it wears down. [9]
    • You can use grinding stones, grinding wheels, chain saw sharpening stones, abrasive wheels and abrasive points to grind a material. Carbide bits tend to work best on metal, porcelain, or ceramic.
    • Use cylindrical or triangular tips for round grinds. To grind a notch into something or grind an inside corner, use a flat disc shape. Or, use cylindrical or triangular tips for round grinds.
  2. Select a sandpaper bit and secure it in your Dremel. Sandpaper bits are available in fine through course grits, and all grades should fit on the same mandrel. Tighten the screw at the end of the sandpaper bit. Turn on your Dremel and set it between 2 and 10. Choose lower settings if you're sanding or polishing plastics or woods. Select a higher setting if you're sanding metal. While holding the material secure, run the bit across the material so that the sandpaper bit completely comes into contact with your material and sharpens or sands it. [10]
    • Make sure that the sanding bits are in good shape so they don't scuff or mark your material. They should fit in the drill snugly and shouldn't be worn. Have several sanding bits on hand so you can quickly replace them.
    • To sand, you can use sanding bands, sanding discs, flap wheels, shaping wheels and finishing and detail abrasive brushes.
  3. If you've got a big job, begin with coarser bits before moving to softer bits. This can help you sand out larger scratches quickly and then you can have more control over working through the material. If you skip the coarse bit and begin with a softer bit, it will take you longer and you'll wear out the softer bit. [11]
    • Check the bit every minute or two to see if the bit is worn or torn. Remember to turn off and unplug the Dremel while you do this.
  4. The Dremel is an excellent tool for fine-detail polishing or polishing in tight spots. Rub a polishing compound over the surface of your object and fit your Dremel with a felt polishing tip or wheel. Start your drill at a low speed (2) and run it against the polishing compound. You should work the wheel in circles until the material is polished. Avoid using a much higher speed (don't go over 4).
    • You can polish without using a compound, but you'll get shinier results with it.
    • For cleaning and polishing jobs, use rubber polishing points, cloth or felt polishing wheels, and polishing brushes. Be sure to get the right kind of coarse polishing brush for the job. These bits are good for taking old paint off of metal furniture or cleaning up tools and grills.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What kinds of things can I use my Dremel tool for?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Home Improvement Specialist
    Expert Answer
    A Dremel tool is great for cutting tiny little pieces of metal or making little notches in things. A lot of times, in order to cut metal, you need a metal grinder, but those tend to be dig. If you need some really tedious work done, the Dremel tool is perfect because it gives you a plethora of different options for blades and attachments. You can use it for defined, detailed cuts. If you're doing some fine detailing, they have little wood bits you can use. It's also great for grout removal. They actually have a special attachment that has a grout bit.
  • Question
    Where can I find a user manual for my Dremel?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Construction Professional
    Expert Answer
    Check the Dremel website at https://www.dremel.com/ for your model's manual.
  • Question
    What is the best way to drill a hole in a rock?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Construction Professional
    Expert Answer
    The best way to drill a hole in a rock is to use a hammer drill with a masonry bit.
See more answers
Ask a Question
      Advertisement

      Tips

      • Make sure that whatever you are working on is secured. If it is loose, clamp it down so that it can't move.
      • Remember not to use too much pressure when you are cutting or sanding. Let the grit in the paper or cutter do all the work.
      • Start the tool so that it is up and running at full speed before you touch the material.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always wear safety glasses while operating a Dremel.
      • Make sure your work area is clear. You should work outdoors or in a room with good ventilation since drilling, sanding, cutting and grinding will leave debris on you, your floor and in the air of your work space.
      Advertisement

      References

      1. Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
      2. https://www.youtube.com/watch?v=C7lq9ypDaXg
      3. https://www.youtube.com/watch?v=C7lq9ypDaXg
      4. https://www.youtube.com/watch?v=C7lq9ypDaXg
      5. Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
      6. Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
      7. https://www.youtube.com/watch?v=Voj-tRCluiA
      8. https://www.youtube.com/watch?annotation_id=annotation_2394979499&feature=iv&src_vid=C7lq9ypDaXg&v=stdL-tNtedw
      9. https://www.youtube.com/watch?v=C7lq9ypDaXg

      About This Article

      Article Summary X

      Before you use a Dremel tool, read the user’s manual to ensure you know how your particular model works. To insert a bit into your Dremel tool, place it into the hole at the end of the Dremel, then tighten the nut so the bit is secure and doesn’t wiggle. Plug in the Dremel, then turn it on to the lowest setting. From there, you can switch it to different speeds. After you use the Dremel, remove the bit and wipe down the drill to remove any debris. For tips from our contracting reviewer on when to use different bits, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 650,516 times.

      Reader Success Stories

      • Laurence X.

        Dec 10, 2016

        "I used to just shove bits in, turn it on, and hope for the best. After reading this, I started practicing putting ..." more
      Share your story

      Did this article help you?

      Advertisement