Download Article
Download Article
Brass is a common decorative item in many homes, both old and new. This metal acts as a perfect material for vent covers, window handles and locks, door knobs, candlesticks, and knick knacks. Unfortunately, these pieces may be covered with paint, obscuring the lovely color and effect of these items. With a bit of time, patience, and elbow grease, it’s possible to remove this paint and leave your brass looking fresh and clean.
Steps
-
Collect your dirty and painted brass objects. You’ll first want to gather all of the brass you’d like to clean. If you’re cleaning fixtures, use a screwdriver to remove the fixtures from the walls or doors. Carefully set aside the screws for each fixture. [1] X Research source
- You can use individual plastic bags to keep track of which screws go with which fixtures. Label the bags with permanent marker.
-
Find a large pot that you don’t plan to cook in again. Because many brass fixtures are quite old, they may be covered in lead-based paint. You’ll need a pot you do not plan on cooking in ever again to remove this paint. You can save the pot, however, for your future cleaning needs. [2] X Research source
- If you don’t have an old pot, you can likely buy one at a thrift store for under $5.
- Alternatively, you can use an old crockpot, but only if you can commit to not cooking in it again.
- You can also use an old crockpot, but only if you can commit to not cooking in it again.
Advertisement -
Place the brass items in the pot. Try not to overfill the pot, and split your cleaning into two sessions if necessary. All of the brass should have enough space in the pot not to touch any other items. [3] X Research source
-
Add water and dish detergent to the pot. Fill the pot with enough water that all of your brass is completely submerged. Add about 4–5 tablespoons (59–74 mL) of soap and give the pot a good mix with an implement you don’t mind throwing away.
-
Simmer the mixture for 6-8 hours. Set your stove to low heat to get the water simmering rather than boiling. This will allow the brass to slowly heat up. You’ll need to give the brass plenty of time to soak in this simmering water so that the paint can fully loosen. [4] X Research source
- If you’re using a crockpot, set to the low setting and leave it on for a minimum of 8 hours and up to overnight.
-
Use tongs to remove the brass from the hot water. The paint should have started to separate from the brass. Your brass will now be very hot, so exercise caution when removing it from the pot.
- You may want to put on a pair of gardening gloves when removing the brass. This should still allow you to have the necessary mobility you need to handle the tongs, while also allowing you to protect yourself from the heat.
-
Set the brass in a bowl of ice water. Cooling off the brass immediately should make the paint even easier to remove. It will also make the brass much safer to handle. Let the brass sit in the ice water for about 5 minutes, then transfer it to an old towel you’re prepared to throw away.
Advertisement
-
Protect your hands with gloves. While you’re removing the paint, you’ll want to protect your hands from any chemicals. Wear rubber or gardening gloves and check them frequently for holes or tears. [5] X Research source
- If you didn't soak the brass fixture in hot water, you can try to put some paint remover on the specific area of paint you want to remove, like Dirtex. [6]
X
Expert Source
Patrick Coye
Painting Specialist Expert Interview. 19 August 2020.
- If you didn't soak the brass fixture in hot water, you can try to put some paint remover on the specific area of paint you want to remove, like Dirtex. [6]
X
Expert Source
Patrick Coye
-
Scrub the paint with steel wool. Now that the paint is loosened, it should be easy to remove with a sponge of steel wool. Once you’ve penetrated through the paint, stop scrubbing. You don’t want to scratch the brass. [7] X Expert Source Patrick Coye
Painting Specialist Expert Interview. 19 August 2020.- If you start to notice any scratching, switch to a soft cloth to more gently rub off the paint.
- You can also scrape away the paint with your fingernails, if you don’t mind getting them dirty.
-
Scrape off stubborn paint with a flathead screwdriver. Use the flat edge of the screwdriver to carefully scrape off paint chips and strips that are sticking to the brass. Go in one direction only, and be sure to scrape away from your body.
-
Use a small nylon bristle brush to reach smaller areas. If your paint is sticking in small crevices or hinges, scrub those spots with a brush. These areas might need extra attention that can’t be provided by your steel wool. [8] X Research source
- Avoid wire brushes, as these may scratch the surface of your brass.
- You can also try using a putty knife to help remove excess paint. [9]
X
Expert Source
Patrick Coye
Painting Specialist Expert Interview. 19 August 2020.
-
Wipe off the paint chips with a dampened cloth or sponge. Once your paint is removed, you’ll need to clean the brass off once more. Wet a soft cloth and wring out the excess water, and then use the damp cloth to gently wipe away any paint residue.
-
Dry off your brass with another soft cloth. Your brass should now be free of paint, and this will complete the cleaning process.
- If you’re dealing with older brass, you may now see a nice antique patina on the metal. Depending on your preferences, you may choose to leave that intact rather than polishing or waxing it away.
-
Use a chemical stripper for any remaining paint. If the paint still isn’t coming off, you may need to address it with a chemical stripper. There are a variety of commercial liquids and gels you can apply to brass in order to strip the paint. [10] X Expert Source Patrick Coye
Painting Specialist Expert Interview. 19 August 2020. You’ll need to let it sit for a few hours, and then you should be able to wipe off the paint residue with a rag. [11] X Research source- Protect yourself from these substances by wearing gloves while you apply and remove it.
- Discard your gloves and any rags with chemical stripper on them in a metal trash can outdoors.
- Don't use sandpaper to remove the paint, since it will just scuff up your fixtures. [12]
X
Expert Source
Patrick Coye
Painting Specialist Expert Interview. 19 August 2020.
Advertisement
-
Cut a lemon in half and remove the lemon seeds. Choose a slightly soft lemon that will yield plenty of juice. Make a cut across the short side of the lemon. Once your lemon is cut in half, remove all the visible seeds from its surface by scraping them out with a knife. [13] X Research source
-
Coat the surface of the cut lemon with table salt. You’ll probably need at least 2-4 teaspoons (11.4-22.8 g) of table salt to completely cover the lemon. The salt will act as a natural sponge when you apply it to your brass. [14] X Research source
-
Scour the brass with the lemon and salt. Rub down the entirety of your brass item with the lemon and salt, squeezing out lemon juice as you go. Check on the salt layer, and replace it when necessary. [15] X Research source
-
Sponge off the mixture. Use a damp sponge or cloth to wipe away the lemon juice and salt mixture. Be sure to thoroughly clean the brass, as any leftover lemon residue will become sticky and hard if it dries. [16] X Research source
-
Buff your brass with a soft cloth. Use a soft, dry cloth to buff your brass by gently wiping the surface in small circular motions. Your brass should now be shiny and gold in appearance.
-
Wax your brass with olive oil. It’s a great idea to protect your brass with a layer of oil. Pour 1 teaspoon (4.9 mL) of olive oil onto a soft, dry cloth and rub the oil onto the brass. Move in small circles to coat the entire piece.
- If you prefer, there are also a variety of commercial wax options for your brass. The application process will also require a soft cloth, and you can buff the surface using the same small circular motions you would use with the oil. Some of these substances may require you to wear protective gloves.
Advertisement
Expert Q&A
Search
-
QuestionHow do you get paint off brass hinges without removing them?Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.Make sure you don't scrape at the paint so hard you scratch or indent your brass fixtures. Generally, try using some kind of paint remover like Dirtex on the specific area to get the paint off. If that doesn't work, you can use a gel stripper. Just be sure not to use sandpaper, since that will just scuff up your hinges.
-
QuestionHow do I remove paint from a screw?Community AnswerOne of the best methods would be to brush off the paint with the help of a fairly concentrated acid.
-
QuestionI have a mirror with brass surrounding it which has been painted, how can I remove the paint?Thorlaug BorgCommunity AnswerTo remove paint from the frame of a mirror, use a paint remover from your local hardware shop. Follow instructions on the packaging. Use in a ventilated are or outdoors on a protected surface. Allow chemicals to sit and do the work. Scrape with plastic or wood spatula as to not scratch the surface. Finally, sand with a fine sandpaper (320 or higher) or use magic sponge to remove the rest of the material.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Be cautious when cleaning screws. Most brass screws are not solid brass, but thinly plated. You don’t want to strip the layer of brass from these screws. Monitor the screws closely to check if your brass is getting stripped away.Thanks
- Do not reuse your pot or pan for cooking, no matter how well you clean it. Old paint has a high chance of containing lead. Lead is poisonous and can cause brain damage in children and reproductive harm to adults.Thanks
Advertisement
References
- ↑ https://www.thisoldhouse.com/painting/21016353/how-to-strip-paint-from-hardware
- ↑ https://www.prettyhandygirl.com/4-ways-to-remove-paint-from-metal-hinges/
- ↑ https://www.thisoldhouse.com/painting/21016353/how-to-strip-paint-from-hardware
- ↑ https://www.thisoldhouse.com/painting/21016353/how-to-strip-paint-from-hardware
- ↑ https://www.prettyhandygirl.com/4-ways-to-remove-paint-from-metal-hinges/
- ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
- ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
- ↑ https://www.thisoldhouse.com/painting/21016353/how-to-strip-paint-from-hardware
- ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
- ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
- ↑ https://www.thegatheredhome.com/remove-spray-paint-from-brass/
- ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
- ↑ https://www.bobvila.com/articles/how-to-clean-brass/#.WROBoLzytok
- ↑ https://www.apartmenttherapy.com/how-to-clean-brass-using-2-natural-kitchen-ingredients-141104
- ↑ https://www.apartmenttherapy.com/how-to-clean-brass-using-2-natural-kitchen-ingredients-141104
- ↑ https://www.apartmenttherapy.com/how-to-clean-brass-using-2-natural-kitchen-ingredients-141104
About This Article
Article Summary
X
Paint on your brass fixtures can ruin their color and beautiful effect, but with a little time and patience, you can get them looking brand new again. Find a large pot that you don’t plan to cook in again and put all of your brass items into it. Add water and dish detergent to the pot and bring it to a boil. Turn the heat down and let the brass fixtures simmer in the pot for at least 6 hours, then transfer them to a bowl of ice water for 5 minutes. Now that you’ve loosened the paint, scrub it off with steel wool, a flathead screwdriver, or a toothbrush. To learn how to polish your brass, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 217,463 times.
Reader Success Stories
- "Finding natural things we have in our home is great! Discovering catsup for cleaning, then half a lemon with salt on top for a loofah, wow! Finish your cleaning process with olive oil to protect and shine, I love it!" ..." more
Advertisement
"Finding natural things we have in our home is great! Discovering catsup for cleaning, then half a lemon with salt on top for a loofah, wow! Finish your cleaning process with olive oil to protect and shine, I love it!"
..."
more
