Download Article
Download Article
Shellac is a resin that the female lac bug secretes. When processed, it is turned into dry flakes which are dissolved in industrial alcohol to make liquid shellac. [1] X Research source Liquid shellac is used as a food glaze, a wood finish, and a brush-on colorant. It is a high quality varnish for wood, and is prized for being a naturally tough primer and sealant. This article explains how to remove shellac that has been used primarily as a wood finish or sealant.
Note that the Shellac Nails product [2] X Research source is something different, and the company that manufactures this product asks that you seek professional removal for it, from a qualified salon. If you need further information about removing nails, see How to remove gel nails and How to remove acrylic nails .
Steps
-
Try to find out how old the wood piece or furniture is. Shellac was a common wood finish before the 1920s; this may be enough to indicate to you that you have a shellac finish. Shellac is also the principal way to make French polish and has been used for this purpose on quality furniture over the past century. [3] X Research source
-
Test for a shellac finish. Old or new, here is the way to check the finish on the furniture or woodwork: [4] X Research source
- Dab a little denatured alcohol or lacquer thinner on one section of the wood finish. Try to find an inconspicuous spot. [5]
X
Expert Source
William & Shannon Latil
Furniture Refinishing & Home Remodeling Specialists Expert Interview. 29 October 2021. - If it is shellac finish, it will liquefy and dissolve. [6] X Research source
- You know it's a lacquer finish if the test spot turns a little white in color. [7]
X
Expert Source
William & Shannon Latil
Furniture Refinishing & Home Remodeling Specialists Expert Interview. 29 October 2021. - A result of softening without dissolving suggests there is shellac present but that it has been mixed with lacquer as well.
- Any other response and you're probably looking at a different wood finish. If in doubt, talk to someone familiar with furniture restoration.
- Dab a little denatured alcohol or lacquer thinner on one section of the wood finish. Try to find an inconspicuous spot. [5]
X
Expert Source
William & Shannon Latil
Advertisement
-
Work to avoid jobs rather than create them when restoring furniture and woodwork! Where the shellac finish appears stained or has dirt embedded in it, try the following first: [8] X Research source
- Sprinkle a mild abrasive compound over the surface. For example, pumice or rotten-stone.
- Work this in.
- Rub off with a cloth.
-
Buff with a clean rag. If the surface looks good again, you're spared having to remove the shellac.
Advertisement
For deeper stained, or irregular and missing shellac stain, removing it is probably your best option. Here is how to remove it: [8] X Research source
-
Using a small brush, brush the shellac with the denatured alcohol.
-
Allow the denatured alcohol to sit for a few minutes. This will help it to begin naturally stripping off the shellac. [10] X Research source
Advertisement
-
Put on some rubber gloves to protect your hands. [11] X Research source
-
Rub the shellac with the steel wool. Remove as much as you can with the steel wool.
- This part does require some effort and hard rubbing. You may need to take breaks and come back to it, depending on the size of the job. Getting others to help is always a good solution!
-
Use a carpet knife for curved, grooved or harder areas. This will be able to reach into narrow spots where the steel wool is just not able to reach.
-
Remove the remaining shellac by wiping with a rag. Change the rag frequently, to avoid reapplying the shellac on stripped parts of the surface.
-
Remove all soft pieces and any debris before proceeding with adding a new finish. It's also important to sand the surface before applying a new finish. [12] X Research source
Advertisement
Community Q&A
Search
-
QuestionCan I sand over shellac on wood that I want to stain and then shellac again?Mark ChampionCommunity AnswerYes, look at French polishing for how to apply. It is not as difficult as it may seem. Clean cloths and a ball of cotton wool are the main requirements.
-
QuestionI have a small side table on which my grandmother hand-painted a Pennsylvania Dutch design in the 1950's. It appears she "sealed" it with shellac but the shellac has yellowed over the years and worn off in some areas. How can I remove the shellac without disturbing the hand-painted design?Community AnswerI don't have experience with this, but if it was mine, I might try sanding lightly, to get the shellac off, and then put several coats of polyurethane on to improve the looks.
-
QuestionHow do I remove shellac easily from carved furniture?Community AnswerWire wool and methylated (denatured) spirit. It takes time, and you will need gloves if heavily carved. A toothbrush will work, but protect your eyes. Best done outside.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Shellac comes in various colors––button polish is golden brown and is made from the highest grade shellac; standard French polish has orange undertones from the orange shellac flakes; bleached shellac results in pale colored woods retaining their paleness and transparent shellac polish comes from removing the natural wax found in bleached shellac. [1] X Research sourceThanks
- There are also commercial preparations available for removing shellac. Decide whether you want to spend the added cost by getting advice from the retailer or manufacturer.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Despite being natural, some shellac surfaces may be hard to remove. It can be a combination of age, method of application and what other layers have been added. If you are struggling too much, seek professional advice.Thanks
- You may need to reapply the denatured alcohol frequently, as it will dry fast and more will be needed.Thanks
- If you reapply a shellac finish, be aware that it is very easy to scratch and that it is susceptible to damage from both water and alcohol. [1] X Research source You will also need to be quite skilled in its application and polishing.Thanks
Advertisement
References
- ↑ 1.0 1.1 1.2 Albert Jackson and David Day, Complete Woodworker's Manual , p. 288, ISBN 0-00-414005-2
- ↑ https://www.cnd.com/products/cnd-shellac
- ↑ https://www.naturalhandyman.com/iip/infpai/shellac.html
- ↑ https://www.woodmagazine.com/materials-guide/finishes/what-finish-is-that-anyway
- ↑ William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
- ↑ http://tlc.howstuffworks.com/home/how-to-strip-wooden-furniture.htm
- ↑ William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
- ↑ 8.0 8.1 Time-Life Books, Restoring Antiques , p. 111, (1995), ISBN 0-8094-9929-0
- ↑ https://www.bobvila.com/articles/how-to-remove-varnish/
- ↑ https://www.bobvila.com/articles/how-to-shellac-wood/
- ↑ https://woodworkingclarity.com/how-to-remove-shellac/
- ↑ https://www.familyhandyman.com/woodworking/furniture-repair/how-to-refinish-furniture/
- TLC, http://tlc.howstuffworks.com/home/how-to-strip-wooden-furniture.htm – research source
- Time-Life Books, Restoring Antiques , p. 111, (1995), ISBN 0-8094-9929-0 – research source
About This Article
Article Summary
X
To remove shellac, start by brushing denatured alcohol onto the wood surface and leaving it for a few minutes to start the stripping process. Then, put on rubber gloves to protect your hands, and rub the shellac with steel wool to remove as much of it as possible. Finally, wipe off any remaining shellac with rags, changing them frequently to avoid reapplying the finish to the parts you’ve already stripped. To learn how to tell whether you should remove the shellac from your furniture, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 175,373 times.
Advertisement
91%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
