Download Article
Quick & easy ways to single thread & double thread a needle
Download Article
Almost all sewing projects no matter how big or small usually start with threading a needle. To make this starting step easier, work with a needle that's large enough for your thread and trim the end so the fibers don't poke out of the needle's eye. Once you've got the thread through your needle, create a quick knot at the bottom. Then, you're ready to sew !
Steps
-
Choose a needle that can accommodate your thread’s thickness. Once you've picked out the thread for your sewing project, look at several needles and hold the thread up to a needle's eye. The eye shouldn't be narrower than the thread or you'll have a hard time threading the needle.- Look at the point of the needle too. You may want a needle with a sharp point so it can pierce fabric easily, for instance, or pick a needle with a blunt tip if you're sewing knit fabric.
- Consider buying a pack of needles in many different sizes, so you can try a few until you find one that's the right size.
Did You Know? The opening of the needle where you insert the thread is called the eye.
-
Unspool at least 1 foot (30 cm) of thread and trim the end for a clean cut. Unravel as much thread as you want to use for your project and cut it from the spool. Then, use your scissors to cut the very tip off of the end of the thread that you'll be threading onto the needle. This will make a clean cut so fibers don't stick out from the end of the thread. [1] X Research source- Try licking the end of the thread to help the fibers stay together.
Advertisement -
Insert the end of the thread through the eye of the needle. Hold the needle between your thumb and forefinger while you hold the end of the thread with your other thumb and forefinger. Then, push the end of the thread through the eye. [2] X Research source
- Play around with threading the needle. For example, you might find that it's easier for you to tightly hold the end of the thread while you push the eye of the needle onto the thread.
Variation: You can fold the end of the thread over to make a small loop. Then, push the tiny loop through the eye of the needle.
-
Try using a needle threader if you're using a very small needle. If you're struggling to push the thread through the eye of the needle, especially if it's small, buy a needle threader from a craft store. Hold the wide end of the threader and insert the bent, wire end through the needle's eye. Then, push the thread through the larger eye of the threader before you pull the threader back through the needle's eye. [3] X Research source
- Needle threaders work really well if you're using a thread that keeps splitting as you try to thread the needle.
-
Pull the thread through the needle to create a tail. Grasp the thread end that you pushed through the needle and pull at least 2 inches (5.1 cm) of it through the needle. This will create a tail that prevents the thread from slipping back out through the needle. [4] X Research source
- The size of the thread tail is a personal preference so pull out as you're comfortable working with.
Advertisement
-
Cut at least 2 feet (61 cm) of thread. You can use more than this depending on how much thread you need for your project. Keep in mind that you'll be folding this in half, which is why you should start by pulling out about twice as much thread as you'll need. [5] X Research source
- For example, if you're darning a sock, you might pull out 3 feet (91 cm) of thread in order to work with a 1 1 ⁄ 2 feet (46 cm) double-strand of thread.
-
Fold the thread in half and hold the ends together. Pinch both of the thread ends together between your thumb and forefinger. This will fold the thread in half evenly so it's a double strand. [6] X Research source
Tip: You'll have an easier time handling the thread and getting it through the needle if you're working in a well-lit space. You can sit right next to a lamp to get the best lighting.
-
Push both ends of the thread through the eye of a needle. Imagine you're threading the needle as usual, but ensure that both ends of the thread go through the eye of the needle. Then, take both ends between your thumb and forefinger and pull the thread until the needle is about 4 inches (10 cm) from the loop end of the thread. [7] X Research source
-
Pull the needle through the loop to make a tight knot . Insert the needle through the middle of the thread loop and keep pulling the needle so the loop travels to the base of the needle. Tug on the needle a little so the loop tightens into a small knot at the base of the needle near the eye. Then, you can tie a knot at the end of the thread. [8] X Research source
- Creating a small knot near the needle will prevent it from sliding around on the double-stranded thread while you're sewing.
Advertisement
-
Wrap the thread end around your middle finger. Use your thumb to hold the loose thread end in place against your middle finger. Then, wrap the thread over your middle finger in order to make a complete loop of thread around the finger. [9] X Research source
- If you used a double-strand of thread, keep them together and wrap both strands around your finger.
Tip: To create friction that makes it easier to tie the knot, lick your thumb and middle finger or dip it in a little water before you wrap the thread.
-
Roll the thread 2 to 3 times to create additional layers for the knot. Keep the thread between your thumb and forefinger. Then, slowly roll your middle finger towards the base of your thumb. [10] X Research source
- The thread should feel thicker between your fingers because you've wound it around itself.
-
Pinch the rolled thread between your fingers. Instead of letting the rolled thread slip off your fingers, keep your thumb and middle finger firmly pressed down on the thread.
-
Pull the thread tightly to create the knot. Keep your fingers clamped down on the thread while you use your other hand to pull the length of thread in the opposite direction. This will form the end of the thread into a knot. [11] X Research source
Variation: If you'd like to make a neater knot, especially if you're working with thick thread, you can insert the end of the thread through the loop that you wound around your finger. Loop it through another time and pull it to create a double overhand knot .
Advertisement
Community Q&A
Search
-
QuestionHow do I tie off a pillow stitch?KillerkitanaCommunity AnswerStart inside of your hem. Hide your knot in the fold of the hem. Right next to where you started, on the other side, pick up with your needle just a few threads in the fabric. Then go right back down into the fold of the hem. The needle will follow that fold, so the thread stays hidden as you make your seam. Pull your needle out of the top of the fold. Right next to where your needle comes out of the hem, threading needle back through your stitching. Repeat until you finish your seam, then tie a knot close seam, then pull the excess thread back through your stitches without piercing the front of the fabric. After about an inch, cut your thread off your needle.
-
QuestionHow do I tie off a blanket stitch?KillerkitanaCommunity AnswerTie a finish knot for the blanket stitch, thread needle through the open loop making sure to hold the needle on one side of the loop while grabbing the thread still on other side of loop. Pulling on the thread from needle will tighten the loop you took the needle through, leaving your needle on one side and a new loop. Thread the needle back through the new loop and pull tight. This will give you a sturdy finished knot but also leave it as a small inconspicuous finish.
-
QuestionHow do I tie two pieces of thread together?Community AnswerIf you mean end-to-end, to make the resulting length the sum of the individual threads' lengths (minus the amount used by the knot), use the square knot or the surgical knot - see tutorials online for instructions on tying. The resulting knot won't pass through fabric easily as does continuous thread, unless the fabric has a very open weave.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- To thread a sewing machine, read the manual that came with your specific model. Most sewing machines will have you pull the thread down from the top of the machine before inserting it through the front of the needle.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Needle
- Thread
- Sharp scissors
- Threader, optional
References
- ↑ https://youtu.be/RycqcXvRZvc?t=64
- ↑ https://chickenscratchny.com/how-to-thread-a-needle-tie-a-knot/
- ↑ https://youtu.be/oHwggj5EN_Q?t=49
- ↑ https://youtu.be/RycqcXvRZvc?t=90
- ↑ https://youtu.be/yCdCTuNyPx0?t=75
- ↑ https://www.tillyandthebuttons.com/2015/11/five-tips-for-threading-sewing-machine.html
- ↑ https://youtu.be/yCdCTuNyPx0?t=90
- ↑ https://youtu.be/yCdCTuNyPx0?t=145
- ↑ https://youtu.be/RycqcXvRZvc?t=106
About This Article
Article Summary
X
To thread a needle and tie a knot, start by unspooling the thread you want to use and cutting it from the spool. Cut the end of the thread off with a sharp pair of scissors to create a point that will be easier to thread through the needle. You can also lick the end of the thread to help the fibers stick together so it's easier to work with. When you're finished, hold a needle between your thumb and forefinger, and hold the tip of the thread between the thumb and forefinger of your other hand. Push the tip of the thread through the eye of the needle, and pull it through until there’s a generous tail. To tie a knot, loop the end of the thread around your finger, then roll the loop between your fingers 2 to 3 times. Pinch the rolled thread between your fingers, and pull the thread tightly to finish the knot. To learn how to double thread a needle, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,748,803 times.
Reader Success Stories
- "I've been sewing for almost 45 years but I've always had a difficult time putting a decent knot at the end of my thread! On my first try with this method I made a strong knot. It wasn't the prettiest but it darn sure worked! Thank you!" ..." more
Advertisement
"I've been sewing for almost 45 years but I've always had a difficult time putting a decent knot at the end of my thread! On my first try with this method I made a strong knot. It wasn't the prettiest but it darn sure worked! Thank you!"
..."
more
"I totally forgot how to hand sew and I needed to do a quick fix on a stuffed animal. What I forgot was how to thread the needle and I actually learned a new and more efficient way to do it. Thank you."
..."
more
"The instructions are simple yet clear. The inclusion of the step by step gifs helps make everything perfectly clear."
..."
more
"Finished my project in time, thanks to this! I was having trouble and the deadline was closing in."
"Helped me to get that initial tie at the end with my fingers, thank you!"
