Download Article
Breathe new life into your favorite socks with a fast and simple patch
Download Article
When cold weather comes, it’s time to pull out your favorite coats, scarves, and warm socks. Just one problem—your trustworthy winter socks are getting holes in them! If you can’t bear to part with your high-quality socks, darning is an easy way to mend them yourself and get a few more months or years of wear from them. In this article, we’ll walk you through the entire darning process, from choosing thread to weaving over those pesky holes. Let’s get started!
Things You Should Know
- Choose thread that matches the color and thickness of the sock’s threads. Try yarn for thick or wool socks, or embroidery thread for thinner socks.
- Make a series of parallel running stitches that span the entire hole. Begin and end your stitches in solid fabric about ½ inch (1.3 cm) from the hole.
- Then, make running stitches perpendicular to your first set of stitches. Weave the thread under and over the previous stitches to create a woven patch.
Steps
-
Choose thread close to the color and thickness of the sock’s threads. Try to match the thickness as close as possible for a sturdy repair—choose darning yarn for thick, wool socks, or embroidery floss or regular thread for thinner materials. Go for cotton or strong synthetic threads rather than something stretchy. The color doesn’t have to match exactly—choose something similar to the sock color to blend in, or a contrasting color to add some visual interest. [1] X Expert Source Chloée Ohayon-Crosby
Costume Designer & Wardrobe Specialist Expert Interview. 24 July 2020.- Yarn and embroidery floss may come in several thicknesses. Bring your sock to a craft or fabric store to compare if you’re not sure which size to get.
- Choosing a contrasting thread color (like white on a dark sock or vice versa) will help you see what you’re doing more easily if you’re not an experienced sewer.
- If you want to add multiple colors to blend in with a pattern, select one color for your horizontal stitches and another color for your vertical stitches.
-
Turn the sock inside out and pull it over a darning egg or mushroom . Darning eggs are wooden ovals that maintain the curved shape of the sock and hold the hole in place so you can make clean stitches (mushrooms are similar but have a base to stand the egg on). Roll the egg into the sock so it’s underneath the hole, then wrap rubber bands or hair ties over the sock on either side of the egg to hold it in place. [2] X Research source
- If you’re using a mushroom, stretch the sock inside out over the mushroom “cap” and place a rubber band around the base of the mushroom to hold the sock in place.
- If you don’t have a darning egg or don’t want to buy one, try using a tennis ball, the rounded end of a baseball bat, maracas, a plastic Easter egg, the bottom of a jar, or any curved, hard surface you can find.
- If you’re concerned about the stitches feeling uncomfortable on your foot, keep the sock right-side out so the stitches go on the outside of the sock.
Advertisement -
Trim away any ragged edges from the hole with scissors. Use little sewing scissors to snip away any threads or flyaway strings that are hanging from the hole before you fix it. Just make sure that you don’t actually snip one too many times and make your hole even larger. Removing loose threads makes the outline of the hole clearer and easier to stitch over. [3] X Research source
-
Thread your darning needle . A darning needle is an extra long needle with a big threading eye that’s useful for sewing over large holes. If you don’t have one, try to find a regular sewing needle with an eye big enough to hold your thread. Thread one strand of thread through the eye if your thread is thick enough for the sock, or thread 2 strands to double up if your thread is too thin. [4] X Research source
- Don’t worry about knotting the end of the thread. Your patch will hold without one, and knots can feel uncomfortable if they’re too big or ill-placed.
- For most holes, thread about 12 in (30 cm) of thread. It’s always better to use way too much thread than too little! [5] X Research source
Advertisement
-
Sew a running stitch around the hole if the surrounding fabric is worn. This step is optional, but if your sock is threadbare around the hole, the fabric may not support your darning efforts. To stabilize the hole, stitch a perimeter circle about â…› inch (0.3 cm) to ½ inch (1.3 cm) outside the hole (or outside of the weakened fabric area). Make sure you’re only stitching into undamaged fabric. [6] X Research source
- When you’ve encircled the hole, leave a tail of thread hanging to use later.
- A running (straight) stitch is the most basic stitch. Run your needle and thread up through the inside of the sock and out, then make a stitch by running the needle back down through the outside of the fabric in a different location. Keep repeating until the circle is complete.
- Make your stitches no more than ¼ inch (0.6 cm) long.
-
Begin a running stitch ½ inch (1.3 cm) from the hole and stitch over it. Make your first stitch in solid fabric (or from your perimeter circle stitch if you made one). When you reach the hole, make one long stitch that spans the entire gap, then continue your running stitch for up to another ½ inch (1.3 cm) on the other side to ensure you’re anchoring the thread is sturdy fabric. [7] X Research source
- If the hole is circular, approach it from any side. If it’s an irregular shape, start stitching from the side where the gap is narrowest (like the long side of an oval).
-
Continue making parallel stitches until the entire hole is covered. Once your first pass over the hole is complete, reverse the direction of your stitches and repeat the process over and over. Try to make your stitches as close together as possible—this will make your patch stronger and more resistant to wear-and-tear. [8] X Research source
- If you’re running out of thread after covering the hole, snip the thread so you’ve got a tail about 2-3 inches (5-7.6 cm) long, then re-thread the needle for the next step. If you have lots of thread left, continue on with the same thread.
-
Turn the sock and weave perpendicular stitches through the parallel stitches. Begin a running stitch about ½ inch (1.3 cm) away from the hole in sturdy fabric. When you reach the hole, weave the tip of your needle under and over the previous stitches all the way across, then continue your running stitch into solid fabric. Reverse direction and repeat these weaved stitches across the hole until you have a solid patch. [9] X Research source
- If needed, use the tip of your needle to push your stitches closer together to make tighter weave.
- Creating stitches that go perpendicular to your previously made stitches will reinforce the patch you have essentially created out of thread.
-
5Weave in the loose ends of your thread to secure the patch. There’s no need to knot the thread at the end—knots tend to be bulky and uncomfortable, and the patch will hold if it’s woven tightly. Just thread any loose ends through your needle and weave them into the patch (a few passes over the hole will be plenty to hold the thread in place). Snip any remaining loose ends with scissors and you’re done mending your sock! [10] X Research source
- If needed, iron over your new patch to flatten out the fabric.
Advertisement
Expert Q&A
Search
-
QuestionWhat's the best kind of thread to use?Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.Match the color of the thread to the fabric as close as possible. Also, use a thread that is more on the cotton side or a strong synthetic thread as opposed to something that has more stretch to it.
-
QuestionWhat size needle should I use?Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.The smaller the needle, the less chance that people will be able to notice the stitching.
-
QuestionI am unable to find darning thread. What can be substituted?Community AnswerYou can use any thread. Try to choose one of a similar weight/thickness to the threads the sock is made from. You can use any thread you have on hand or even embroidery thread, but you would probably only need 1 or 2 strands of thread from embroidery thread. You can use yarn for wool socks.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Consider backstitching several of your stitches throughout the darning process. This way, all of your work won’t be undone if the thread breaks during the repair.Thanks
- Darn holes in your socks as soon as you notice them (don’t keep wearing them!). The sooner you repair them, the easier and less time consuming it will be.Thanks
- Darning is worth the effort for thick, high-quality socks you want to preserve (it may be overkill for a cheap tube sock from a big box store, for example). To be green, consider repurposing worn out or cheap socks as cleaning rags or packing material.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful not to poke your thumb or fingers while threading the needle or stitching. Wear a thimble if you keep pricking yourself on accident.Thanks
Advertisement
Things You'll Need
- Sock with a hole or worn patch
- Darning needle
- Darning yarn or embroidery floss to match the sock
- A darning egg or similar object
- Sewing scissors
- Thimble (optional)
References
- ↑ Chloée Ohayon-Crosby. Costume Designer & Wardrobe Specialist. Expert Interview. 24 July 2020.
- ↑ https://www.etiquetteclothiers.com/pages/etiquette101-chapter-15-darning-a-hole-in-your-sock
- ↑ https://www.knitfreedom.com/blog/darn-socks/
- ↑ https://www.etiquetteclothiers.com/pages/etiquette101-chapter-15-darning-a-hole-in-your-sock
- ↑ https://theradicalhomemaker.net/farm-views-and-politics/how-to-darn-wool-socks/
- ↑ https://craftingagreenworld.com/articles/how-to-darn-a-sock/
- ↑ https://www.etiquetteclothiers.com/pages/etiquette101-chapter-15-darning-a-hole-in-your-sock
- ↑ https://www.etiquetteclothiers.com/pages/etiquette101-chapter-15-darning-a-hole-in-your-sock
- ↑ https://craftingagreenworld.com/articles/how-to-darn-a-sock/
About This Article
Article Summary
X
To darn a sock, start by picking thread that’s about the same color as your sock, then thread your needle and knot the end of the thread. Be sure to trim away any loose threads or ragged edges around the hole. Then make a running stitch across the hole by pushing your needle through one side of the hole, going under it, and pulling your needle back up through the other side of the hole. Keep making running stitches like that across the hole until your sock is mended. If you want to learn how to make perpendicular stitches to make your sock stronger, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 829,937 times.
Reader Success Stories
- "Being 90 years old, it was very enjoyable to read about darning a sock, an almost lost art these days of throw-aways. Waste not, want not is another one of those phrases that one never hears, as most people can't be bothered with tedious jobs." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Being 90 years old, it was very enjoyable to read about darning a sock, an almost lost art these days of throw-aways. Waste not, want not is another one of those phrases that one never hears, as most people can't be bothered with tedious jobs."
..."
more
"I have lots of socks with holes in the toes. I work in heat and use bamboo socks which keep my feet nice and dry. The rest of the sock are still ok. Watching this video will save all my socks. Thank you so much for teaching me how to darn."
..."
more
"I enjoy knowing the history of the phrase, "A stitch in time saves nine." It's great when an article gives a brief explanation of why the step is necessary, giving a better overall understanding of what it is I am working on. Thank you."
..."
more
"Excellent tutorial! Thanks because now I can save my specially-prescribed (expensive!) socks. So easy to follow these directions: life-saving, game-changing. Darning is one of those essential, never-taught skills."
..."
more
"I never knew how to darn a sock. I didn't even know there were actual sock darners you could buy. I happened to find one in an old sewing kit I got at a flea market (mainly for the the beauty of the box itself)."
..."
more
